Professional Documents
Culture Documents
yes
Commissioning:
Product induction
Calibration/Aftercare: Has the
Maintenance employee completed
Inspection/validation no the basic ATEX
Repair training?
Replacement
yes
*1 Installation includes:
*3 The trainer must be a "competent person". He
Fixing in place (mechanical becomes competent by attending an external
assembly) *2 The trainer must be a "qualified person". seminar (ATEX basics – refer to x2) and
Laying of cables He is authorised by the ATEX officer and participating in intensive product training (held by
must have successfully completed an the product equipment producer). Here, the issues
external seminar (ATEX basics). He will relating to ATEX protection are addressed. The
Electrical wiring
receive proof of qualification from the trainer receives a training certificate from the
seminar organiser. In workshops that run on equipment producer. In workshops run on an
Initial electrical switch-on
an annual basis (held by the ATEX officer), annual basis (refer to x2), the standard of
the standard of knowledge is checked and knowledge is checked, discussed and updated
Acceptance by the updated. where necessary by follow-up training from the
"competent person" for the equipment producer. Organised by the ATEX
operator (operator = officer.
customer)
Approved: Version 01