Professional Documents
Culture Documents
8. Cortex M3 processor is of
[ ]
a) 32-bit b) 64-bit c) 16-bit d) 8-bit
d) Message
a) Memory Protection unit b) Main Program unit c) Memory program unit Program unit
11. How many data lines are there in a 16*2 alphanumeric LCD?
a) 16 b) 8 c) 1 d) 0
1 2. For writing commands on an LCD, RS bit is
a) set b) reset c) both of the mentioned d) none of the mentioned
13. Which pin of the LCD is used for adjusting its contrast?
a) pin no 1 b) pin no 2 c) pin no 3 d) pin no 4
14. The RS pin is an input/output for a controller?
a) input b) output c) both of the mentioned d) none of the mentioned
15. ARM stands for
a) Advanced Rate Machines b) Advanced RISC Machines c) Artificial Running Machines d) Aviary
Running Machines
19. The addressing mode where the EA of the operand is the contents of Rn is ______
a) Pre-indexed mode b) Pre-indexed with write back mode c) Post-indexed mode
d) None of the mentioned
20. Which microcontrollers are adopted for designing medium scale embedded systems?
a. 8-bit b. 16-bit to 32-bit c. 64-bit d. All of the above
21 . While designing an embedded system, which sub-t ask oriented process allocates the time steps for
various modules that share the similar resources?
a. Simulation and Validation b. Iteration c. Hardware-Software Partitioning d. Scheduling
22. . .In Cortex-R processor series, which among the following represent/s dual core configuration along with the space
saving the floating point unit?
a. Cortex-R 4 b. Cortex-R 5 c. Cortex-R 7 d. All of the above
23 In Cortex-A processor series, which among the following is the standalone and smallest processor in
size constraints with high-end application support?
a. Cortex-A5 b. Cortex-A9 c. Cortex-A53 d. Cortex-A59
24. At an active HIGH reset pin of 8051 microcontroller, for how many machine cycles should the
positive going pulse be provided, if the power is switched ON?
a. only one b. Two c. Three d. four
25. The method of processing Exceptions in ARM is ________________
26. Fetching the next instruction while current instruction is in execution is called ______________