Professional Documents
Culture Documents
: ABC/1001
101, Known Street, Known Area, Known City, Pin …. Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 4-May-22
Project: XYZ Building Page No. F/101
H 0
4 H' Hx Hy t +ve
3 h
Footing X2 X1 Column Allowed for cases of
X either Mx=0 or My=0
PLAN Footing SECTION Soil Pressure under Footing
Main Inputs: Column Loads at top of Footing
Footing Footing Size (m) Column Size(m)Soil Depth(m) P Mx My Hx Hy
Load Case
Mk. L B t h b H H' (kN) (kNm) (kNm) (kN) (kN)
F1 5.00 3.80 0.750 0.700 0.600 2.00 0.00 564 450 500 0 0 DL + LL1
F2 5.00 3.00 0.750 0.700 0.600 3.75 0 264 1250 0 0 0 DL + LL1
F3 5.50 3.60 0.900 1.300 0.700 3.93 0 586 1654 128 0 0 3
Incl. Seismic
F4 5.50 3.60 0.900 1.300 0.700 0.90 0 2000 2000 54 0 0 DL + LL1
F5 5.00 4.00 0.700 0.350 0.300 4.00 1 120 60 34 5 1 DL + LL1
F6 10.00 8.00 1.800 0.750 0.750 4.00 1 1000 100 56 25 8 2
Incl. Wind
F7 6.00 4.00 1.000 0.500 0.400 4.00 1 560 65 23 12 3 2
Incl. Wind
F8 7.00 6.00 1.200 0.600 0.600 4.00 1 450 80 14 6 2 DL + LL1
F9 3.00 2.00 0.500 0.300 0.300 3.00 3 50 150 10 0 0 3
Incl. Seismic
F10 5.50 4.50 0.600 0.450 0.450 3.00 1 120 67 12 9 1 2
Incl. Wind
Company's Name: ABC Consultants Job No.: ABC/1001
101, Known Street, Known Area, Known City, Pin …. Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 4-May-22
Project: XYZ Building Page No. F/102
Bottom Reinforcement:
Cover to Bar Dia.(mm)Actual Reinforcement along 'L' at btm. Reinforcement along 'B' at btm.
Footing btm bars along along Eff.'d' Ast reqd. Provide Ast Ast reqd. Provide Ast
Mk. (mm) L' B' (mm) (mm2) Nos. Dia.(mm) Spacing (mm2) (mm2) Nos. Dia.(mm Spacing (mm2)
F1 75 20 16 665 3420 11 20 370 3456 4500 23 16 225 4624
F2 75 20 16 665 5077 17 20 185 5341 4500 23 16 225 4624
F3 50 20 16 840 3888 13 20 295 4084 5940 30 16 190 6032
F4 50 25 16 837.5 8351 18 25 210 8836 5940 30 16 190 6032
F5 75 16 16 617 3360 17 16 245 3418 4200 21 16 245 4222
F6 75 25 20 1713 ### 36 25 230 17671 ### 69 20 150 21677
F7 75 16 16 917 4800 24 16 170 4825 7200 36 16 170 7238
F8 75 20 16 1115 8640 28 20 220 8796 ### 51 16 140 10254
F9 50 12 12 444 1200 11 12 190 1244 1800 16 12 195 1810
F10 75 12 12 519 3240 29 12 160 3280 3960 36 12 155 4072
Note: Minimum reinforcement in either direction at bottom of footing is 0.15% of total cross-sectional area
for MS bars, as per Cl. 34.5.1 and 26.5.2.1 of IS:456-2000. This value is reduced to 0.12% for
HYSD bars as per the same clause. 'Ast reqd.' cells in 'Green' indicate minimum steel as per code.
Company's Name: ABC Consultants Job No.: ABC/1001
101, Known Street, Known Area, Known City, Pin …. Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 4-May-22
Project: XYZ Building Page No. F/103
Top Reinforcement:
Cover to Bar Dia.(mm)Actual Reinforcement along 'L' at top Reinforcement along 'B' at top
Footing top bars along along Eff.'d' Ast reqd. Ast Ast reqd. Ast
Provide Provide
Mk. (mm) L' B' (mm) (mm2) (mm2) (mm2) (mm2)
F1 75 12 12 669 0 14- 12dia.@285crs 1583 1800 16- 12dia.@330crs 1810
F2 50 12 12 694 1080 11- 12dia.@290crs 1131 0 18- 12dia.@290crs 2036
F3 50 12 12 844 1296 13- 12dia.@295crs 1357 0 20- 12dia.@285crs 2262
F4 75 0 0 825 0 Reinf't. not reqd. 0 0 Reinf't. not reqd. 0
F5 75 12 12 619 1440 15- 12dia.@280crs 1470 1800 16- 12dia.@330crs 1810
F6 75 12 12 1719 2880 28- 12dia.@295crs 2941 3600 35- 12dia.@295crs 3619
F7 75 12 12 919 1440 15- 12dia.@280crs 1470 2160 21- 12dia.@295crs 2262
F8 75 12 12 1119 2160 21- 12dia.@295crs 2262 2520 25- 12dia.@290crs 2601
F9 50 12 12 444 720 8- 12dia.@275crs 791.68 1080 10- 12dia.@325crs 1131
F10 75 12 12 519 1620 16- 12dia.@295crs 1696 1980 18- 12dia.@320crs 2036
Note: If footing thickness is equal to or more than 1m, or where nominal reinforcement is to be provided
at top of footing, Ast in either direction at top is 360mm2/m width, as per Cl. 34.5.2 of IS:456-2000.
'Ast reqd.' cells in 'Blue' indicate nominal reinforcement as per code, using 12 dia. bars.
Shears X-X
Note: If permissible shear stress τc is shown in 'Red', revise the relevant reinforcement or
increase the footing thickness, as necessary.
Company's Name: ABC Consultants Job No.: ABC/1001
101, Known Street, Known Area, Known City, Pin …. Design by: UVW
Client: Very Important Industries Ltd, Well Known City Date: 4-May-22
Project: XYZ Building Page No. F/104
Shears Y-Y
Note: If permissible shear stress τc is shown in 'Red', revise the relevant reinforcement or
increase the footing thickness, as necessary.
Factor of Safety
Footing against Over-turning Overall Status of
Mk about X-X about Y-Y Design
F1 7.005 4.791 Section O.K.
F2 2.451 N/A Revise Ast/Thk
F3 3.183 26.918 Section O.K.
F4 3.301 80.032 Revise Size
F5 63.786 82.599 Section O.K.
F6 317.803 287.974 Section O.K.
F7 102.205 132.380 Section O.K.
F8 151.966 506.282 Section O.K.
F9 4.015 40.153 Revise Size
F10 59.816 190.137 Section O.K.
15 240 DL + LL 25 415 Footings.xls
20 250 Incl. Wind 25
25 415 Incl. Seismic DL+LL Incl. Wind/Seismic
30 500 fcb = 8.5 11.3305
35 n= 0.2887 0.2334
40 j= 0.9038 0.9222
45 Q = 1.1089 1.2194
50 fst = 230 306.59
Soil Pressures (kN/m2):
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
P (kN) 1338 1333 2062 2446 1507 7168 2272 3505 261 1373
Mx (kNm) 450 1250 1654 2000 60.7 114.4 68 82.4 150 67.6
My (kNm) 500 0 128 54 37.5 101 35 21.2 10 17.4
ex 0.3362 0.938 0.8022 0.8178 0.0403 0.016 0.0299 0.0235 0.5756 0.0492
ey 0.3736 0 0.0621 0.0221 0.0249 0.0141 0.0154 0.006 0.0384 0.0127
6 ex/L 0.4035 1.1256 0.8752 0.8922 0.0483 0.0096 0.0299 0.0201 1.1512 0.0537
if ex>L/6 1.5405 2.1341 1.8825 1.8977 1.3552 1.3376 1.3468 1.3423 2.1636 1.3576
K2-4 0.4035 2.1341 0.8752 0.8922 0.0483 0.0096 0.0299 0.0201 2.1636 0.0537
K1-3 -0.4035 -2.1341 -0.8752 -0.8922 -0.0483 -0.0096 -0.0299 -0.0201 -2.1636 -0.0537
6 ey/B 0.5899 0 0.1035 0.0368 0.0373 0.0106 0.0231 0.006 0.1151 0.0169
if ey>B/6 1.6597 1.3333 1.381 1.3499 1.3501 1.338 1.3437 1.336 1.3865 1.3409
K1-2 0.5899 0 0.1035 0.0368 0.0373 0.0106 0.0231 0.006 0.1151 0.0169
K3-4 -0.5899 0.0000 -0.1035 -0.0368 -0.0373 -0.0106 -0.0231 -0.0060 -0.1151 -0.0169
P/A 70.437 88.838 104.13 123.51 75.373 89.602 94.66 83.458 43.432 55.472
Corner 1 83.57 0.00 23.77 17.86 74.54 89.69 94.01 82.28 -1.57 53.43
Corner 2 140.41 189.59 206.03 238.25 81.828 91.407 99.681 85.645 98.432 59.389
Corner 3 0.46 0.00 2.23 8.77 68.92 87.80 89.64 81.27 -11.57 51.56
Corner 4 57.31 189.59 184.48 229.16 76.20 89.51 95.31 84.64 88.43 57.51
3(L/2-ex) 6.491 4.686 5.843 5.797 7.379 14.952 8.910 10.429 2.773 8.102
3(B/2-ey) 4.579 4.500 5.214 5.334 5.925 11.958 5.954 8.982 2.885 6.712
P/L 267.66 266.51 374.87 444.64 301.49 716.82 378.64 500.75 86.865 249.62
edge2-4 375.66 835.27 702.93 841.33 316.06 723.68 389.97 510.84 274.8 263.03
edge1-3 159.66 -302.24 46.799 47.942 286.93 709.95 367.31 490.66 -101.07 236.22
P/B 352.18 444.19 572.71 679.31 376.87 896.02 567.96 584.21 130.3 305.1
edge1-2 559.94 444.19 631.97 704.31 390.93 905.49 581.09 587.74 145.3 310.25
edge3-4 144.43 444.19 513.45 654.31 362.8 886.55 554.84 580.67 115.3 299.94
L1, m 5.000 4.686 5.500 5.500 5.000 10.000 6.000 7.000 2.773 5.500
B1, m 3.800 3.000 3.600 3.600 4.000 8.000 4.000 6.000 2.000 4.500
X-X Moments (kNm)
Left
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
Right, m 2.850 2.850 3.400 3.400 2.675 5.375 3.250 3.800 1.650 2.975
Left, m 2.150 2.150 2.100 2.100 2.325 4.625 2.750 3.200 1.350 2.525
Zero Pr,m 3.6413 1.8359 2.4433 2.3965 4.7042 9.5771 5.6602 6.6295 1.1232 7.6273
Local Pr,kN/m2 252.54 327.25 297.32 350.87 300.47 716.3 377.7 499.88 111.3 248.53
Ma, kNm 440.57 -213.59 287.33 328.37 787.71 7615.8 1402 2527.9 -27.595 766.1
Mb, kNm 793.25 350.75 694.37 799.07 1279.3 12732 2388.8 4354.4 37.572 1288.5
M, kNm 82.65 -143.2 -304.32 149.8 -70.4 163.1 171.9 -14.0 -81.07 -103.56
Right
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
Right, m 2.150 2.150 2.100 2.100 2.325 4.625 2.750 3.200 1.350 2.525
Left, m 2.850 2.850 3.400 3.400 2.675 5.375 3.250 3.800 1.650 2.975
Zero Pr,m 3.6413 1.8359 2.4433 2.3965 4.7042 9.5771 5.6602 6.6295 1.1232 5.1273
Local Pr,kN/m2 282.78 -118.42 452.41 538.4 302.51 717.33 379.58 501.61 -40.937 250.72
Ma, kNm 796.69 1195.8 1365.8 1632.5 842.05 7717.3 1461.5 2599.8 154.51 825.42
Mb, kNm 888.24 -126.92 1056.6 1226.1 1287.9 12750 2400.8 4369.5 -13.819 1299.8
M, kNm 438.77 701.84 774.18 1453.9 -16.077 264.68 231.43 57.859 35.866 -44.238
Design Mx (kNm)
+ve 438.77 701.84 774.18 ### 0.00 264.68 231.43 57.86 35.87 0.00
-ve 0.00 -143.2 -304.32 0.0 -70.4 0.0 0.0 -14.0 -81.07 -103.56
Top
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
Top, m 0.953 0.553 0.628 0.633 1.249 1.935 0.899 1.603 0.418 1.518
Btm., m 2.847 2.447 2.972 2.967 2.751 6.065 3.101 4.397 1.582 2.982
Zero Pr,m 1.73 3.95 2.24 2.37 3.17 5.89 2.85 4.58 1.30 3.73
Local Pr,kN/m2 455.73 444.19 611.3 695.51 382.15 900.91 575.19 585.85 139.03 306.77
V1, kN 483.97 245.64 390.39 443.04 482.79 1747.7 519.74 940.64 59.424 468.32
V2, kN 826.29 876.61 1401.6 1634.7 893.53 4514.8 1453.7 2161.5 171.48 796.69
V, kN 289.78 48.664 132.95 364.71 -12.9 62.265 81.067 12.166 -22.21 -37.824
Design Y-Y Shear (kN) at eff. 'd' from column face
+ve 289.78 48.664 132.95 364.71 0 62.265 81.067 12.166 0 0
-ve -6.8922 0 0 0 -37.06 0 0 0 -32.13 -48.196
Top
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
Top, m 1.277 0.877 1.039 1.042 1.550 2.780 1.350 2.152 0.634 1.772
Btm., m 2.524 2.124 2.561 2.559 2.451 5.220 2.651 3.849 1.366 2.729
Zero Pr,m 2.06 3.62 2.65 2.78 3.47 6.74 3.30 5.13 1.52 3.98
Local Pr,kN/m2 420.36 444.19 597.76 689.84 380.03 898.91 572.23 585.21 135.79 306.19
V1, kN 625.68 389.33 638.85 726 597.3 2508.1 778.2 1261.8 89.104 546.02
V2, kN 694.16 804.76 1247.8 1480.5 831.49 4125 1317.4 1998.6 152.82 756.37
V, kN 365.57 77.132 212.93 597.12 -17.641 86.676 119.7 15.634 -34.715 -44.655
Design Y-Y Shear (kN) at eff. '0.5d' from column face
+ve 365.57 77.132 212.93 597.12 0 86.676 119.7 15.634 0 0
-ve 0 0 0 0 -44.339 0 0 0 -47.705 -55.73
NOTES ON FOOTINGS .xls
This Spreadsheet is intended to be used by qualified Civil and Structural Engineers who are
familiar with the provisions of IS:456-2000, and those who will evaluate the significance and
limitations of its contents and take responsibility for its use and application.
DISCLAIMER
No liability is accepted by the author of the Spreadsheets for any direct, indirect, consequential or
incidental loss or damage arising out of the usage of Spreadsheets or any mistakes and negligence
in developing the Spreadsheets. The organisation or person using the Spreadsheets bears all risks
and responsibility for the quality and performance of the Spreadsheets.