Professional Documents
Culture Documents
Therm-O-Disc
1 Bimetal Disc Thermostat
Features and Benefits
The 75TF series features include:
• Primary and secondary temperature sensing in the same location.
• Automatic reset SPST in series with the single operation SPST.
• Snap-action bimetal disc for high-speed contact separation.
• A wide variety of terminal and mounting options for design flexibility.
• Welded construction for integrity of current-carrying components.
• Available with an exposed or enclosed bimetal disc for either increased thermal response or
protection from airborne contaminants.
Figure 1 Figure 2
Dimensions are shown in inches and (millimeters). Dimensions are shown in inches and (millimeters).
Terminal Configurations
Standard terminations for the 75TF are .250” x .032” (6.35mm x .81mm) unplated brass blade terminals formed at
90 angular degrees. Terminal angles of 0 and 30 degrees can also be provided. Optional screw or fork terminals are
available at additional cost.
Contact
Pilot Duty VA Resistive Amperes Volts AC Cycles of Operation Agency Recognition
Switching
NOTE: At thermostat end-of-life, the contacts may remain permanently closed or open
Therm-O-Disc
4 Bimetal Disc Thermostat
Part Numbering System
Circuit Diagram
These controls contain exposed electrical components and are not intended to withstand exposure to water or other
environmental contaminants which can compromise insulating components. Such exposure may result in insulation
breakdown and a companying localized electrical heating.
A control may remain permanently closed or open as a result of exposure to excessive mechanical, electrical, thermal
or environmental conditions or at normal end-of-life. If failure of the control to operate could result in personal injury
or property damage, the user should incorporate supplemental system control features to achieve the desired level of
reliability and safety. For example, backup controls have been incorporated in a number of applications for this reason.
2017TOD-23 (07/18) Emerson are trademarks of Emerson Electric Co. or one of its affiliated companies. ©2017 Emerson Electric Co. All rights reserved.