Professional Documents
Culture Documents
P S /N S
ex PS P
fl x
e fle x P S
ap
M ape efle
M ap
M
Multi-component polysulphide sealant
[Ceramica]
95_mapeset_uae (04.02.2016 - 2nd DRAFT/PDF)
S/SL S
P /N dust free. All dust and laitance must be
flexx PS S P removed by wire brushing, grinding or grit Mapeflex PS/SL and PS/NS are an
pe fle x P blasting. All metal surfaces must be free of elastomeric sealants and may be applied to
Maape efle all rust, scale and protective lacquers. Use a joints between 5 and 50 mm wide. Joints
M ap suitable solvent to remove any traces of oil which are expected to experience cyclic
M or grease. movements should be designed to an
optimum width: depth ratio of 2:1, subject to
Ensure that the expansion joint filler is the overriding recommended minimum
tightly packed and devoid of any gaps or sealant depths set out below:
spaces at the base of the sealing slot, prior
to positioning of the bond breaker tape. The • 5 mm for metals, glass and other
use of a bond breaker tape is not required in non-porous surfaces;
expansion joints containing polyethylene • 10 mm for all porous surfaces;
foam joint fillers. For construction or
• 20 mm for trafficked joints and those
contraction joints polyethylene bond
subject to hydrostatic pressures.
breaker tape must be used.
STORAGE
To ensure a neat finish, use masking tape
Shelf life of 12 months in original unopened
along the face edges of the joint before
priming. Ensure the tapes are removed containers.
immediately on completion of tooling
works. Store in dry conditions in enclosed
warehouse at temperatures not exceeding
MAPEFLEX PS P – Primer for porous 25 °C.
surfaces
Mapeflex PS P is a single component SAFETY INSTRUCTIONS FOR
chemically active liquid primer, recommended PREPARATION AND APPLICATION
for all porous substrates namely concrete, Mapeflex PS/NS and Mapeflex PS/SL
stone, brickwork, timber etc. Apply a components A and B are irritant for the
uniform coat of Mapeflex PS P to the eyes. Mapeflex PS/NS and Mapeflex PS/SL
bonding faces of the joint ensuring a components B are also irritant for the skin
uniform application. Avoid ponding at the and are harmful if swallowed and inhaled.
base of the joint. When applying the product, use protective
Whenever excess porosity is encountered gloves and goggles and take the usual
an additional coat is recommended . Allow precautions for handling chemical products.
the primer to become touch dry, before If the product comes into contact with the
proceeding with the application of eyes or skin, wash immediately with plenty
Mapeflex PS/SL or PS/NS. Any primed of clean water and seek medical attention.
areas not sealed within 3 hours of primer Use a suitable device to protect the
application, should be re-primed one hour respiratory tracks.
prior to the sealant application.
Mapeflex PS/NS and Mapeflex PS/SL
Note on primer application components A and B are hazardous for
• Avoid excess priming to eliminate chances aquatic life. Do not dispose of these
of primer ponding at the base of the joint. products in the environment.
• Apply Mapeflex PS/SL, PS/NS and PS P
are only when the primed surface is tack For further and complete information about
free, which is after the solvent has
the safe use of our product please refer to
evaporated but prior to the primer film
our latest version of the Material Safety Data
having reacted completely.
sheet.
PACKAGING
Mapeflex PS P is inflammable. We
Mapeflex PS P - Primer: 1 litre.
Mapeflex PS/SL - Self levelling grade: 4 liters. recommend storing it away from naked
Mapeflex PS/NS - Non sag grade: 2.5 liters. flames and sparks, to avoid smoking, to
prevent the build up of electrostatic energy
CONSUMPTION and to work in well ventilated areas. It is also
irritant for the skin, eyes and respiratory
Joints Size Liters LM per LM per tracks, harmful if inhaled or if it comes into
in mm per LM 4 liter 2.5 liter contact with the skin. When applying the
pack pack
product, use protective gloves and goggles
10X5 0.050 80.00 50.00 and take the usual precautions for handling
20X10 0.200 20.00 12.50 chemical products. If the product comes
into contact with the eyes or skin, wash
40X20 0.800 5.00 3.10 immediately with plenty of clean water and
50X25 1.250 3.20 2.00 seek medical attention. Use a suitable
TECHNICAL DATA (typical values)
PRODUCT IDENTITY
VOC Content: 0% 0%
FINAL PERFORMANCES
flexx PS S P life. Do not dispose of these products in the product supplied by us will meet our written
pe fle x P
environment. specification. The installer should ensure that
Maape efle
our latest product data and safety informa-
For further and complete information about tion sheets have been
M ap the safe use of our product please refer to consulted prior to use.
M our latest version of the Material Safety Data
sheet. Please refer to the current version of the
Technical Data Sheet, available from our
IMPORTANT NOTES web site www.mapei.com
Whilst we try to ensure that any advice,
recommendations or information given in our
literature is accurate and correct, we have no All relevant references
control over the circumstances in which our for the product are available
product is used. it is therefore important that upon request and from
installers satisfy themselves that the product www.mapei.com
and conditions are suitable for the envisaged