Professional Documents
Culture Documents
SECTION LU
CONTENTS LU
LUM0008
CAUTION:
• Apply new engine oil to the parts marked in the figure prior
to installation.
LU-2
OIL PUMP
Inspection
OIL PUMP COMPONENTS INSPECTION
• Measure each clearance using a feeler gauge.
Outer rotor to housing clearance (1 in the figure)
Standard:
0.114 - 0.260 mm (0.0045 - 0.0102 in.)
Outer rotor to inner rotor tip clearance (2 in the figure)
Standard:
0.180 mm (0.0071 in.) or less
LUM0009
LUM0004
LU-3
OIL PUMP
Inspection (Cont’d)
REGULATOR VALVE CLEARANCE
• Measure inner diameter of regulator valve cylinder using an
inside micrometer.
• Measure regulator valve outer diameter using a micrometer.
(Clearance) = (Cylinder bore inner diameter) – (Valve outer
diameter)
Standard:
0.040 - 0.097 mm (0.0016 - 0.0038 in.)
CAUTION:
• Apply engine oil to regulator valve. Make sure that the
LUM0007
valve moves smoothly.
LU-4