Professional Documents
Culture Documents
RTTS 封隔器安全接头
Description
The design of the RTTS safety joint makes unintentional operation difficult.
Operation
The RTTS safety joint is run immediately above the RTTS packer so that
the greatest number of tools above the packer may be removed.
Before the safety joint can be used, a tension sleeve located on the bottom
of the lug mandrel must first be parted by pulling up on the work-string.
After the tension sleeve has parted, the safety joint is released by right-
hand torque while the work-string is rotated a specified number of cycles.
Casing Size 4-1/2 in. to 5 in. 7 in. to 7-5/8 in. 8-5/8 in. to 13-3/8 in.
* The values of tensile, burst, and collapse strength are calculated using new tool conditions,
Lame’s formulas with Von-Mises Distortion Energy Theory for burst and collapse strength,
and stress area calculations for tensile strength.