Professional Documents
Culture Documents
engineering
High early compressive strength cube competition
Student ID -
Introduction
The background of the selected mixtures
The high performance of the concrete
GGBS: - Stainless concrete cement prepared for OPC
is not flexible, nor does it contain
cement and natural sand for M20 grade. The
ingredients that can be used in
maximum compression strength was 32.59 Mpa in
concrete that are considered to date.
30% of GGBS exchanges and those obtained with
Instead, high-quality concrete is a
20%, 40%, and 50% concrete were 31.11Mpa,
concrete development that has been
30.7Mpa and 27.74Mpa respectively compared to
discussed in the last few studies. With
29.11 Empty cement capacity for 28 days.
regard to power, we should note that
the meaning of the word 'high power' Air entraining agent: - Ventilation mixture facilitates
changed considerably over the years: the development of a system of small air bubbles
at one time, 40 MPa (or 6000 psi) was inside the concrete during mixing. As a general rule,
considered high; later, 60 MPa (or a 1% rise in concrete air will reduce the pressure for
9000 psi) was considered high- 28 days by about 3 to 5%.
strength concrete, high performance
would be considered as a compressive
strength of more than 80 MPa (or 12
000 psi).
Casting Process
durability concern cement content Foundry sand is a key compound used to obtain cube
adopted = 420 Kg compressive strength by replacing composite.
Foundry sand is collected for industry.
general mass of fully completed fresh
concrete = 𝟐𝟑𝟖𝟔. 𝟓𝟖𝟑 𝑲𝒈 Quality study
net mass of aggregate from Concrete The composite design approach adopted in the
= 𝟏𝟕𝟓𝟔. 𝟓𝟖𝟑 𝑲𝒈. current study according to IS 10262- 2009 in the M25
grade, in total there are 3 different shapes (cubes) of
Quantity of GGBS = 𝟓𝟕. 𝟗𝟑 𝑲𝒈 shapes prepared within a larger design combination.