Professional Documents
Culture Documents
INSTRUMENT LIST
1. FQI-501
2. FQI-801
DATA SHEET
TABLE OF CONTENT
COVER ………………….………...………..……..………………………… 1
TABLE OF CONTENT…………………………...…..…………………… 4
1. SCOPE………………………………………………………………… 5
3. DOCUMENT REFERENCE…………………………………… 5
1. SCOPE
This Datasheet covers the requirements for design and supply of Flow Meter ( Volumetric ) for "Relokasi DPPU Hasanuddin-Makassar.
Location of this project will be in Makassar, South Sulawesi, Indonesia.
Any omission of details in this datasheet shall not relieve the vendor of his obligation to furnish a complete functional system which operates
reliably and satisfactorily.
The components and accessories furnished with the system shall be designed and fabricated in accordance with the applicable codes and
standards listed in section 2 and 3 of this datasheet.
3. DOCUMENT REFERENCE
HSN-SP-60-002-A4 - General Specification for Instrument Installation
PARAMETER VALUE
Ambient Temperature 25 ºC (min) / 40 ºC (max)
Design Temperature 50 ºC
Average Ambient Pressure 1.03195 kg/cm2 A
Relative Humidity Design & Average 100 RH & 82% RH
Maximum Relative Humidity 93% RH
Rainfall Annual Average 914 mm
Wind Velocity 4 knot ( 7.4 km/h )
Design for Wind Load ASCE 7-95
Note:
1. As per Mnftr Std / calculation subject to Contractor's Approval
2. Vendor shall provide all documentation and certificate required Subject to Contractor's Approval.
3. Technical, brochures, bulletins and other references shall be attached on bid document.
4. Vendor shall advice all material as per Mft Standard and proven experience subject to contractor's approval.
5. All instrument shall be attached with 316SS name plate, stamped with tag no and platform no, and fix with SS screws or wire. 1
6. Minimum requirement is the totalizer digit can measure up to cm3 unit.
7. Vendor shall provide all required document ( minimum : Certificate of origin, hydrotest certificate, material certificate, certificate of compliance ).