Professional Documents
Culture Documents
Technical features
Medium: Ports: Operating temperature: Standard Materials:
Compressed air, filtered, G1/8 ... 1 ø 32 ... 125 mm Barrel: Anodised aluminium
lubricated or non-lubricated Cylinder diameters: “Standard version” End covers: Pressure diecast
Standard: 32, 40, 50, 63, 80, 100, 125, -20 ... +80°C max. (-4 ... +176°F) aluminium (ø 200 ... 320 mm
ISO 15552 160, 200, 250, 320 mm ø 160 ... 320 mm gravity cast aluminium)
Operation: Standard strokes: “Standard version” Piston rod: Stainless steel
Double acting, 25, 50, 80, 100, 125, 160, 200, -10 ... +80°C max. (+14 ... +176°F) (martensitic)
adjustable cushioning 250, 320, 400, 500 mm ø 32 ... 320 mm Piston rod seals: PUR
Operating pressure: Non-standard strokes: “High temperature version” (T) (ø 160 ... 320 mm NBR)
ø 32 ... 125 mm (Profile barrel) Available (5 ... 2800 mm) 0 ... +150°C max. Piston seals: PUR
1 ... 12 bar (14 ... 174 psi) (-17,7 ... +302°F) (ø 160 ... 320 mm NBR)
ø 32 ... 200 mm (Round barrel) ø 32 ... 200 mm ‘O’-rings: NBR
1 ... 16 bar (14 ... 232 psi) “Low temperature version” (L)
ø 250 & 320 mm (Round barrel) -40 max. ... +80°C max.
1 ... 10 bar (14 ... 145 psi) (-40 ... +176°F)
Air supply must be dry enough
to avoid ice formation at
temperatures below +2°C (+35°F).
Technical data
Cylinder ø (mm) 32 40 50 63 80 100 125 160 200 250 320
Profile barrel • • • • • • •
Round barrel • • • • • • • • • • •
Port size G1/8 G1/4 G1/4 G3/8 G3/8 G1/2 G1/2 G3/4 G3/4 G1 G1
Piston rod ø (mm) 12 16 20 20 25 25 32 40 40 50 63
Piston rod thread M10 x 1,25 M12 x 1,25 M16 x 1,5 M16 x 1,5 M20 x 1,5 M20 x 1,5 M27 x 2 M36 x 2 M36 x 2 M42 x 2 M48 x 2
Cushion length (mm) 20 22 24 24 26 33 39 43 43 55 60
Cushioning
Adaptive cushioning systems “ACS” • • • • • • •
Speed
Speed (v)
[v]
Our policy is one of continued research and development. We therefore reserve the right to amend, 03/18
without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.01
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Basics to Consider
The force required, the pressure available, the speed of movement and air
consumption. ISO and VDMA standard or compact style also cushioning
and sensors. Cylinders are greased on assembly and operate under
normal conditions without additional lubrication. However using a
lubricator will extend the life of these products.
Golden Rule:
The theoretical force of the cylinder should be 25% extra for high speed,
50% extra for low speed and 100% extra for ultra low speed (positioning)
applications.
The correct sizing is based upon the required force and applied pressure.
Go to page 1 for more information on cylinder sizing and air
consumption.
KNICKSICHERHEIT
KNICKSICHERHEIT
Load and Buckling
KNICKSICHERHEIT
KNICKSICHERHEIT
For applications with high side loading, use pneumatic slide actators or standard cylinders fitted with guide units.
Beim
Beim Einsatz
Einsatz vonvon Zylindern
Zylindern
Beim Einsatz mit
mitvon großen
großen
Beim Hublängen
Hublängen
Zylindern
Einsatzmitvon muss
muss
großen in in
Zylindern jedem
jedem Fall
Fall auf
aufHublängen Fürdiedie
FürFall Berechnung
Berechnung derder Kolbenstange
Kolbenstange wird
wird je je nach
nach Befestigungsart
Befestigungsart
Alternatively external guide bearings should beHublängenmit
installed. großen
muss
When in jedem
a long muss
stroke auf in
lengthjedem
is FürFall
die auf
Berechnung
specified, Für der
die
careKnicklänge
must beKolbenstange
Berechnung
taken der
to ensurewird
Kolbenstange
je nach Befestigungsart
wird je nach Befestigungsart
diedie Steifigkeit
Steifigkeit derder
die Kolbenstange
Kolbenstange
Steifigkeit der Rücksicht
Rücksicht
die
Kolbenstange genommen
genommen
Steifigkeit der
Rücksicht werden.
werden.
Kolbenstange
genommenLange,
Lange,
Rücksicht
werden. (Einbauart)
(Einbauart)
genommen
Lange, werden.des
des Zylinders
Zylinders diedie
(Einbauart)
Lange, Knicklänge
des Zylinders
(Einbauart) festgelegt.
festgelegt.
die des Aus
Knicklänge Aus
Zylindersder der Abbildung
Abbildung
festgelegt.
die Knicklänge
Aus der
festgelegt.
Abbildung
Aus der Abbildu
the
schlanke rod length is
Kolbenstangen within
dürfenthe limits
bei for
drückend prevention of
arbeitenden buckling.
Zylindern The table shows
nichtZylindernkönnen the maximum stroke length for a variety of installation arrangements.
schlanke Kolbenstangen
schlankedürfen bei
Kolbenstangendrückend
schlanke dürfenarbeitenden
Kolbenstangen
bei drückendZylindern
dürfen bei nicht
arbeitenden
drückend nichtdiedie
können
arbeitenden freien
freien
Zylindern Knicklängen
Knicklängen
können
nicht
die freien in Abhängigkeit
in können
Abhängigkeit
Knicklängen in von
von
die freien derder Einbauart
Einbauart
Abhängigkeit
Knicklängen ermittelt
inermittelt
vonAbhängigkeit
der Einbauartvon
ermittelt
der Einbauart er
eingesetzt
eingesetzt werden,
werden, umum einein
eingesetzt Ausknicken
Ausknicken
werden, einder
um der
eingesetzt Kolbenstange
Kolbenstange
Ausknicken
werden, umder zu vermeiden.
zuKolbenstange
ein vermeiden.
Ausknicken der werden.zu vermeiden.
werden.
zu Kolbenstange
vermeiden. werden. werden.
F F F F F F F F F F F F F FF
F F F F F
1)1) 1) 1) 2)2) F F
2) F F F F F
2) F F F 3)3) F F 3) 4)4)
3) 4) 4)
Zylinder
Zylinder CylinderKolbenstange
Piston rod
Kolbenstange
Zylinder Belastung
Belastung Load
Kolbenstange
Zylinder 1 case
FallFall 1
1 Belastung Belastung
Fall 1 Belastung
Kolbenstange Belastung Load
Fall 2 12case
Fall
Fall 2
Belastung Belastung
Fall 2 Belastung
Belastung Load
Fall
Fall case 3 Fall 3 Belastung
3 23 Belastung
Fall Belastung
Belastung Load
Fall
Fall case 4 Fall 4 Belastung Fall 4
4 34 Belastung
Fall
Ø Ø ø (mm) Ø Ø Ø ø (mm) Druck ØDruck Pressure (bar)
(bar)
Ø (bar) Ø (bar)
Druck Druck
Druck
Druck(bar) Pressure (bar)
(bar)
(bar) Druck (bar) Druck
Druck
Druck(bar)
(bar)
Pressure (bar)
(bar) Druck (bar) Druck
Druck
Druck (bar) Pressure
(bar)
(bar)
(bar)
Druck (bar) Druck (bar)
mm mm mm mm
mm 4 mm
4 mm 64 6 10 mm 16
46 10 16
610 44
16
410 616466 10610 16
4 10 16
10
616 4104416 616664 10 10
6
4 10 16 1610 410
616 44 16 61666 4 10 10 6 16
4 10 16 10 10
616 4 16 166 10 1
8 8 32 3 83 12 3270
270 8 220 220 170
1100 270170
3
860 130
220130 130
650 130 100
170
270
500 130 100 80
220
500 80
130
170
390 60 60
290 170
100
130 170
210 130
80130 130
650 100
60100 100
170
80520 80 80380 190
130
60 190
100
170290 160 160760 120
80130 120600 90
190
100 90 450 120
160
80 190 340 90160 120 9
10 10 4
4 10 4380
380 10 300300 230 380230
4 170
300170 170 170 140
230
380 170 140 100
300 100 70
170
230 70
140
170 230
100230 180
170 180 130
70140 130 100
230
100 100 260
180
70 260 210
130
230 100210 160
180 160 120
260
130 120 160
210
100 260 120
210 160 1
40 16 1600 1200 950 730 730 580 430 320 940 750 560 430 1100 880 660 500
12 12 4
4 12 4310
310 12 250250 180 310180
4 140
250140 140 140 110
180
310 140 110 80
250 80
140
180 50 50
110
140 180 180 140
80140 140 100
50110 100 80
180
80 80
140
50 220220 170
100
180 170 120
80140 120 90
220
100 90
170
80 120
220 90170 120 9
50 6 6 20 6730 590
730 2000
590 450 1600
730450
6 1200
350
590350 350 930
350 280
450
730 930
350 280 210
590 740
210 160
350
450 550 450
160
280
350 210 420 360
450
350 1601200 270
360
280 450960 210
270
210 360
160720 520
210 270
450550 420
520 2104201400320
360 3201100240
520
270 240840 320
420
210 520 640 240
420 320 2
16 16 63 6 20
6 16 6540
540 16 440 440 330
1500 540330
1200
6 250
440250 250
930 250 200
720
330
540 250 200 150
720
440 150 110
570
250
330 110
420 330
200
250 150330
310 260
250 260
110930 190
200 190
330740 150
150 150
260
110550 380 380
190
330420 300
1503001100230
260 230860 240
380
190 240650 230
300
150 380 490 240
300 230 2
80 8 8 25 8980 790
980 790 600
1900 980600
8
1500 470
790470 470
1100 470 370
600
980
880 470 370 280
790
880 280 210
470
600
700 210
510 600
370
470 280600
380 480
470 480
2101100 360
370 360
600910 280
280 280
480
210680 700 700
360
600510 560
2805601300430
480 4301100330
700
360 330800 430
560
280 700 600 330
560 430 3
20 20 8
8 20 8780
780 20 620620 470 780470
8 370
620370 370 370 290
470
780 370 290 220
620 220 160
370
470 160 470
290
370 220470 380
370 380 280
160
290 280 210
470
220 210 550
380
160 550 440
280
470 210440 330
380 330 250
550
280 250 330
440
210 550 250
440 330 2
100 25 1500 1200 880 670 670 520 380 270 880 690 510 370 7101000 540820 410600 450
10 10 1200 1000
1200
10 1000 760 760
10 590
1200 590 590
1000 590 470
760
1200 590 470 350
1000 350 270
590
760 270
470
590 760
350760
590 610610
270
470 460460
760
350 350350
610
270 880880
460
760 710610 540
350 460 410
880 710
350 540
880 410
710 540 4
25 25 125 10 32
1025 970970
10 25 790 2000
790 600 1600
970600
10 460 1200
790460 460 910
460 370
600
970 910
460 370 270
790 710
270 200
460
600 520 600
200
370
460 270 380 480
600
460 2001200 360
480
370 600940 270
360
270 480
200690 690
270 360
600520 560
690 2705601400420
480 4201100320
690
360 320820 420
560
270 690 620 320
560 420 3
160 12 12 40 1400 1100
1400
12 1100 880
2400 880
12 680
1900
1400 680 680
1500
1100 680 550
1100
880
1400 680 550 410
1100 410 310
880
680
880 310
640 870
550
680 410870
480 700
680 700
3101400 530
550 530
8701200 410
410 410
700
310860 10001000
530
870640 820
4108201700620
700 6201400480
1000
530 4801000620
820
410 1000760 480
820 620 4
31,75
31,75 (1,25) 1231,75
(1,25) 12 (1,25) 1100 1100
31,75890 890 680 680
12 520 520 680 520 420 420 310 310 420 230 680 680 540 540 410 410 310 310 790 790 630 630 480 480 360 360 480
200 40 12 (1,25)
1900 1100
1500 1100 520
890 1100
860 520890
860 670 230
520
680 520
480 310 520
350 230 420
1100 680 310
890 540 230650 410680480 310 540 1300 790
410 1000630
310 770 790 580 360630 480 3
32 32 12
1232 1100
1100
12 32 860860 650 650
12 500
1100 860500 500 500 390
650
1100 500 390 290
860 290 210
500
650 210 650
390
500 290650 520
500 520 380
210
390 380 290
650
290 290 760
520
210 760 600
380
650 290600 450
520 450 340
760
380 340 450
600
290 760 340
600 450 3
250 50 2400 1900 1400 1100 1100 850 620 440 1400 1100 830 610 1700 1300 980 730
16 16 2000 1600
2000
16 1600 1200 1200
16 960
2000 960 960
1600 960 770
1200
2000 960 770 580
1600 580 450
960
1200 450 1200
770
960 5801200 990
960 990 750
450
770 750 580
1200
580 580 1400
990
450 1400 1100
750
1200 5801100 870
990 870 680
1400
750 680 870
1100
580 1400 680 1100 870 6
40 40 320 14 63
1440 1200
1200
14 40 9603000
960 730 2400
730
14 570
1200 1800
960570 570 1400
570 450
730
1200 1400
570 450 340
960 1100
340 250
570
730 780 730
250
450
570 340 570 580
730
570 2501800 440
580
450 7301400 330
440
340 580
2501000 850
330 440
730780 680
850 3306802100510
580 5101700390
850
440 3901200510
680
330 850 930 390
680 510 3
16 16 1600 1200
1600
16 1200 950 950
16 730
1600 730 730
1200 730 580
950
1600 730 580 430
1200 430 320
730
950 320 940
580
730 430940 750
730 750 560
320
580 560 430
940
430 430 1100
750
320 1100 880
560
940 430880 660
750 660 500
1100
560 500 660
880
430 1100 500 880 660 5
44,45
44,45 (1,75) 1644,45
(1,75) 16 (1,75) 1400 1400
16 44,4511001100 870
(1,75) 870
16 670
1400 670 670
1100 670 540
870
1400 670 540 400
1100 400 300
670
870 300 860
540
670 400860 690
670 690 520
300
540 520 400
860
400 400 1000
690
300 1000 810
520
860 400810 610
690 610 470
1000
520 470 610
810
400 1000 470 810 610 4
50 50 20
2050 2000
2000
20 50 1600 1600 1200 1200
20 930
2000 930 930
1600 930 740
1200
2000 930 740 550
1600 550 420
930
1200 420 1200
740
930 5501200 960
930 960 720
420
740 720 550
1200
550 550 1400
960
420 1400 1100
720
1200 5501100 840
960 840 640
1400
720 640 840
1100
550 1400 640 1100 840 6
50,8
50,8 (2) (2) 20 (2)
2050,8 1900
1900
20 (2)1600 1200
50,8 1600 1200
20 930
1900 930 930
1600 930 740
1200
1900 930 740 550
1600 550 420
930
1200 420 1200
740
930 5501200 960
930 960 720
420
740 720 550
1200
550 550 1400
960
420 1400 1100
720
1200 5501100 840
960 840 640
1400
720 640 840
1100
550 1400 640 1100 840 6
63 63 20
2063 1500
1500
20 63 1200 1200 930 930
20 720
1500 720 720
1200 720 570
930
1500 720 570 420
1200 420 310
720
930 310 930
570
720 420930 740
720 740 550
310
570 550 420
930
420 420 1100
740
310 1100 860
550
930 420860 650
740 650 490
1100
550 490 650
860
420 1100 490 860 650 4
63,5
63,5 (2,5)
(2,5) 25 (2,5)
2563,5 2400
2400
25 63,5 20002000 1500
(2,5) 1500
25 1200
2400 1200 1200
2000 1200 930
1500
2400 1200930 700
2000 700 530
1200
1500 530 1500
930
1200 7001500 1200
1200 1200 900
530
930 900 690
1500
700 690 1700
1200
530 1700 1400
900
1500 6901400 1100
1200 1100 810
1700
900 810 1100
1400
690 1700 810 1400 1100 8
76,2
76,2 (3) (3) 25 (3)
2576,2 2000
2000
25 (3)1600 1200
76,2 1600 1200
25 950
2000 950 950
1600 950 760
1200
2000 950 760 560
1600 560 420
950
1200 420 1200
760
950 5601200 980
950 980 740
420
760 740 560
1200
560 560 1400
980
420 1400 1100
740
1200 5601100 860
980 860 660
1400
740 660 860
1100
560 1400 660 1100 860 6
80 80 25
2580 1900
1900
25 80 1500 1500 1100 1100
25 880
1900 880 880
1500 880 700
1100
1900 880 700 510
1500 510 380
880
1100 380 1100
700
880 5101100 910
880 910 680
380
700 680 510
1100
510 510 1300
910
380 1300 1100
680
1100 5101100 800
910 800 600
1300
680 600 800
1100
510 1300 600 1100 800 6
100100 25
25100 1500
1500
25 100 1200 1200 880 880
25 670
1500 670 670
1200 670 520
880
1500 670 520 380
1200 380 270
670
880 270 880
520
670 380880 690
670 690 510
270
520 510 370
880
380 370 1000
690
270 1000 820
510
880 370820 600
690 600 450
1000
510 450 600
820
370 1000 450 820 600 4
101,6
101,6 (4’)(4’) 32 (4’)
32101,6 2400
2400
32 101,620002000 1500
(4’) 1500
32 1100
2400 1100 1100
2000 1100 910
1500
2400 1100910 670
2000 670 500
1100
1500 500 1500
910
1100 6701500 1200
1100 1200 890
500
910 890 670
1500
670 670 1700
1200
500 1700 1400
890
1500 6701400 1000
1200 1000 790
1700
890 790 1000
1400
670 1700 790 1400 1000 7
125125 32
32125 2000
2000
32 125 1600 1600 1200 1200
32 910
2000 910 910
1600 910 710
1200
2000 910 710 520
1600 520 380
910
1200 380 1200
710
910 5201200 940
910 940 690
380
710 690 520
1200
520 520 1400
940
380 1400 1100
690
1200 5201100 820
940 820 620
1400
690 620 820
1100
520 1400 620 1100 820 6
127127
(5’)(5’) 38,1
38,1
127 (1,5)
(1,5)
(5’) 2800
2800
38,1
127 2200 1700
2200
(1,5)
(5’) 1700
2800 1300
38,1 (1,5) 1300 1300
2200 1300 1000
1700
2800 13001000 760
2200 760 570
1300
1700 570 1700
1000
1300 7601700 1300
1300 1300 1000
570
1000 1000 760
1700
760 760 2000
1300
570 2000 1600
1000
1700 7601600 1200
1300 1200 900
2000
1000 900 1200
1600
760 2000 900 1600 1200 9
152,4
152,4 (6’)(6’) 38,1
38,1 (1,5)
(1,5)
152,4 (6’) 2300
2300
38,1
152,4 1800 1400
1800
(1,5) (6’) 1400
2300 1100
38,1 (1,5) 1100 1100
1800 1100 830
1400
2300 1100830 610
1800 610 440
1100
1400 440 1400
830
1100 6101400 1100
1100 1100 810
440
830 810 600
1400
610 600 1600
1100
440 1600 1300
810
1400 6001300 950
1100 950 720
1600
810 720 950
1300
600 1600 720 1300 950 7
160160 40
40160 2400
2400
40 160 1900 1900 1500 1500
40 1100
2400 1100 1100
1900 1100 880
1500
2400 1100880 640
1900 640 480
1100
1500 480 1400
880
1100 6401400 1200
1100 1200 860
480
880 860 640
1400
640 640 1700
1200
480 1700 1400
860
1400 6401400 1000
1200 1000 760
1700
860 760 1000
1400
640 1700 760 1400 1000 7
200200 40
40200 1900
1900
40 200 1500 1500 1100 1100
40 860
1900 860 860
1500 860 670
1100
1900 860 670 480
1500 480 350
860
1100 350 1100
670
860 4801100 890
860 890 650
350
670 650 480
1100
480 480 1300
890
350 1300 1000
650
1100 4801000 770
890 770 580
1300
650 580 770
1000
480 1300 580 1000 770 5
203,2
203,2 (8) (8) 44,45
44,45 (1,75) 2300
(1,75)
203,2 (8) 2300
44,45
203,2 1900 1400
1900
(1,75)
(8) 1400
2300 11001100 1100
44,45 (1,75)
1900 1100 840
1400
2300 1100840 610
1900 610 440
1100
1400 440 1400
840
1100 6101400 1100
1100 1100 810
440
840 810 600
1400
610 600 1600
1100
440 1600 1300
810
1400 6001300 960
1100 960 720
1600
810 720 960
1300
600 1600 720 1300 960 7
250250 50
50250 2400
2400
50 250 1900 1900 Our 1400
2400policy1100
1400
50 is
1900one of1100
1100 continued
1100 850
1400
2400 research
1100850 620
1900 and
620 development.
1100
1400 440440 1400
850
1100 620We therefore
1400
1100 1100reserve
1100
440
850 830830the 610
1400
620 right
610to amend,
1100
440 1700 1300
1700
830
1400 1300 980
610
1100 980 730
1700
830 730 980
1300
610 1700 730 1300 980 7
en 1.5.220.02 without
254254
(10)(10) 57,15
57,15
254 (2,25) 3100
(2,25)
(10) 3100
57,15
254(2,25)
(10)2500 1900
2500 57,15notice,
1900
3100 14001400the1400
(2,25)
2500 specifications
1400 1100
1900
3100 14001100given
2500 840 in this 620
840
1400
1900 document.
620 1900
1100
1400 840(2016 -1500
1900
1400 9159h)
1500 ©
620
1100 2015
1100 Norgren
1100
1900
840 830830 GmbH
1500
620 2200 1700
2200
1100
1900 8301700 1300
1500 1300 990
2200
1100 990 1300
1700
830 2200 03/18
990
1700 1300 9
304,8
304,8 (12)(12) 57,15
57,15 (2,25) 2500
(2,25)
304,8 (12) 2500
57,15
304,8 2000 1500
2000
(2,25)
(12) 1500
2500 12001200 1200
57,15 (2,25)
2000 1200 920
1500
2500 1200920 660
2000 660 480
1200
1500 480 1500
920
1200 6601500 1200
1200 1200 890
480
920 890 660
1500
660 660 1800
1200
480 1800 1400
890
1500 6601400 1100
1200 1100 790
1800
890 790 1100
1400
660 1800 790 1400 1100 7
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Profile barrel
Round Barel
ATEX II 2GD
Automation
Automotive
CE-marked
Beverage
Industrial
Rail *1)
Food &
Symbols ø (mm) Range Discription Datasheet
• • • • • Double Acting 1_5_220_PRA_802000_M_RA_8000_M
32 ... 125 PRA/802000
• • Cylinder 1_5_225_PRA_802000_M_EX
• • • • Double Acting 1_5_220_PRA_802000_M_RA_8000_M
32 ... 125 RA/802000
• • Cylinder 1_5_225_PRA_802000_M_EX
• • • • 1_5_220_PRA_802000_M_RA_8000_M
Double Acting
160 ... 320 RA/8000
Cylinder
• • 1_5_126_RA_8000_M_EX
• • • • • 1_5_127_KA_8000_M
Stainless steel
32 ... 200 KA/8000
Cylinder
• • 1_5_128_KA_8000_M_EX
• • • 1_5_230_PRA_822000_M
Smooth Line
32 ... 100 PRA/822000
Cylinder
• • 1_5_235_PRA_822000_M_EX
• • • 1_5_250_PRA_862000_M
7
IVAC Industrial
32 ... 100 PRA/862000
Cylinder
1 3
• • 1_5_255_PRA_862000_M_EX
• • • • 1_5_260_PRA_882000_M
7 11
IVAC Clean Line
32 ... 100 PRA/882000
Cylinder
7
1 3
• • 1_5_265_PRA_882000_M_EX
• • • • 1_9_051_PSA_182000_F1
PSA/182000/ Cylinder with
40 ... 125
F1 position sensor
• • 1_9_052_PSA_182000_F1_EX
• • • Datasheet (standard)
Cylinder with
160 ... 320 SA/8000/F1
position sensor
• • 1_9_062_SA_8000_F1_EX
• • • • • 1_4_101_PRA_801000_803000
“PRA/801000, Standard Single
32 ... 100
PRA/803000” Acting Cylinder
-
• • • • 1_4_101_PRA_801000_803000
“RA/801000, Standard Single
32 ... 100
RA/803000” Acting Cylinder
-
• Range available
For additional information please contact the technical service or http://www.imi-precision.com
Cylinder ranges in the frame are shown in this data sheet.
*1) Rail Cylinder Shock and vibaration tested to EN 61373 Category 1; Class A + B
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.03
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Cylinder variants
Symbol Versions Piston Rod Material Standard Model with ø Description Page
Please see the description Male Piston Female Piston
below H L T R S C D Rod Thread Rod Thread (mm)
• • • X • • • .PRA/802000/M .PRA/802000/MX 32 ... 125 Standard Cylinder (Profile barrel) 8
• • • X • • • .RA/802000/M .RA/802000/MX 32 ... 125 Standard Cylinder (Round barrel) 8
• • X • • • .RA/8000/M - 160 ... 320 Standard Cylinder (Round barrel) 9
• • X • • • .RA/8000 - 160 ... 320 Standard Cylinder (Round barrel) without Magnet 9
X • • • PRA/802000/W2 PRA/802000/W2X 32 ... 125 Cylinder with Special Wiper - Seal
X • • • RA/802000/W2 RA/802000/W2X 32 ... 125 (suitable for appl. with cement, plaster (stucco),
arizona sand, hoar-frost or ice) 11
X • • • RA/8000/W1 - 160 ... 200 Cylinder with Special Wiper - Seal without Magnet
X • • • PRA/802000/X2 PRA/802000/X2X 32 ... 125 Low Friction Cylinder
Operating pressure: 1 … 10 bar,
X • • • RA/802000/X2 RA/802000/X2X 32 ... 125 11
Medium: Compressed air,
X • • • RA/8000/X2 - 160 ... 200 filtered and non-lubricated recomended
X • • • RA/8000/X1 - 160 ... 200 Low Friction Cylinder without Magnet 11
• • • X • • • .PRA/802000/MU .PRA/802000/MUX 32 ... 125 Cylinder with Extended Piston Rod
Maximum stroke: 2000
• • • X • • • .RA/802000/MU .RA/802000/MUX 32 ... 125 11
Maximum extention: 800
• • X • • • .RA/8000/MU - 160 ... 320
• • X • • • RA/8000/IU - 160 ... 320 Cylinder with Extended Piston Rod without Magnet
X • • • PRA/802000/W6 PRA/802000/W6X 32 ... 125 Cylinder with Extended Piston Rod and Special
Wiper - Seal Maximum stroke: 2000 suitable for
X • • • RA/802000/W6 RA/802000/W6X 32 ... 125
appl. with cement, plaster (stucco), arizona sand, 11
hoar-frost or ice
X • • • RA/8000/W6 - 160 ... 200 Cylinder with Extended Piston Rod and Special
X • • • RA/8000/W5 - 160 ... 200 Wiper - Seal without Magnet
• X • • • .PRA/802000/MG .PRA/802000/MGX 32 ... 125 Cylinder with Piston Rod Bellows
• X • • • .RA/802000/MG .RA/802000/MGX 32 ... 125 Maximum stroke:
ø 32 = 1860, ø 40 ... 320 = 2000 13
• X • • • .RA/8000/MG - 160 ... 320
• X • • • .RA/8000/G - 160 ... 320 Cylinder with Piston Rod Bellows without Magnet
• X • • • .PRA/802000/MW .PRA/802000/MWX 32 ... 125
• X • • • .RA/802000/MW .RA/802000/MWX 32 ... 125 Cylinder without Cushioning
11
• X • • • .RA/8000/MW - 160 ... 320
• X • • • .RA/8000/W - 160 ... 320 Cylinder without Cushioning without Magnet
X • • • PRA/802000/X4 PRA/802000/X4X 32 ... 125 Low Friction Cylinder without Cushioning
Operating pressure: 1 … 10 bar,
X • • • RA/802000/X4 RA/802000/X4X 32 ... 125
Medium: Compressed air,
X • • • RA/8000/X4 - 160 ... 200 filtered and non-lubricated recomended 11
Low Friction Cylinder without
X • • • RA/8000/X3 - 160 ... 200
Cushioning without Magnet
• • • X • • • .PRA/802000/JM .PRA/802000/JMX 32 ... 125
• • • X • • • .RA/802000/JM .RA/802000/JMX 32 ... 125 Cylinder with Double Ended Piston Rod
• • X • • • .RA/8000/JM - 160 ... 320 12
Cylinder with Double Ended Piston Rod without
• • X • • • .RA/8000/J - 160 ... 320
Magnet
X • • • PRA/802000/W4 PRA/802000/W4X 32 ... 125 Cylinder with Double Ended Piston Rod and Special
Wiper - Seal without Magnet
X • • • RA/802000/W4 RA/802000/W4X 32 ... 125 8
(suitable for appl. with cement, plaster (stucco),
X • • • RA/8000/W3 - 160 ... 200 arizona sand, hoar-frost or ice)
• • X • • • .PRA/802000/MT .PRA/802000/MTX 32 ... 125 Four Position Cylinder
Maximum stroke = stroke 1 + stroke 2
• • X • • • .RA/802000/MT .RA/802000/MTX 32 ... 125 ø 32 = 700, ø 40 = 1000, ø 50 = 1000,
ø 63 = 900, ø 80 = 1200, ø 100 = 1100, 12
• • X • • • .RA/8000/MT - 160 ... 200 ø 125 = 1200, ø 160 = 1200, ø 200 = 1100
• • X • • • .RA/8000/IT - 160 ... 200 Four Position Cylinder without Magnet
X PRA/802000/N2 PRA/802000/N2X 32 ... 100
Cylinder with Non-Rotating Piston Rod
X RA/802000/N2 RA/802000/N2X 32 ... 100
Maximum stroke: 1000 11
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.04 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.05
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Cylinder with Profile barrel ø 32 ... 125 mm Cylinder with Round barrel ø 32 ... 320 mm
24
24 11 + 20
12
Mountings
Model A AK B, G C D D2 F FH H UH
1 2 3 4
3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 1 10 2 311 412 513 614 7
713 814 915 10
16 17 18 19 1 20
1 12 2123 3234 14345 25456 915710910
1136567124767813587891469810 168 10179 18
10 1911 2012 13
20 14
21 15
22 16
23 1
ø Page 15 Page 15 Page 15 Page 15 Page 16 Page 16 Page 16 Page 16 Page 17 Page 17
22
7 23
18 24
19 25
20 26 27 28 1129
1111
12 12
11
12
13 13
121411
13 14
131512
14 15
1420
1513
16 16
1521
1614
17 17
1622
1715
18 18
1723
1816
19 19
1824
1917
20 20
1925
20182026
19 27
20 2820 2921 22
30 23
31 24
32 25
33 23
32 QM/8032/35 QM/8025/38 QA/8032/22 QA/8032/21 QA/8032/23 QA/8032/42 QM/8025/25 QA/8032/34 QA/8032/28 QA/8032/40
6
32 27
33 40 28
34 29
35 36
QM/8032/35 37 38 2039
QM/8040/38 202021 2120
QA/8040/22 21
22 22
212320
22 2322
QA/8040/212421
23 24
2324
25
3022
25243123
25
26
QA/8040/23 26
25 3224
26
27 27
26 3325
27
28
QA/8040/42 28
273426
28
29 292835272936
29
QM/8040/25 28 3729
QA/8040/34 30 3931
38QA/8040/28 32 33
QA/8040/40 34 35 3
50 QM/8050/35 QM/8050/38 QA/8050/22 QA/8050/21 QA/8050/23 QA/8050/42 QM/8050/25 QA/8050/34 QA/8050/28 QA/8050/40
6 37 63 38 39
QM/8050/35 QM/8050/38 30QA/8063/22
303031 313031
32 32
313330
32 3332
QA/8063/213431
33 34
333532
34 35
34 3633
35
QA/8063/23 36
353734
36 37
363835
37
QA/8063/42 38
37
38
3936
39
38393739 QA/8063/34
QM/8050/25 38 39 QA/8063/28 QA/8063/40
80 QM/8080/35 QM/8080/38 QA/8080/22 QA/8080/21 QA/8080/23 QA/8080/42 QM/8080/25 QA/8080/34 QA/8080/28 QA/8080/40
100 QM/8080/35 QM/8080/38 QA/8100/22 QA/8100/21 QA/8100/23 QA/8100/42 QM/8080/25 QA/8100/34 QA/8100/28 QA/8100/40
125 QM/8125/35 QM/8125/38 QM/8125/22 QM/8125/21 QM/8125/23 QA/8125/42 QM/8125/25 QA/8125/34 QM/8125/28 QA/8125/40
160 QM/8160/35 QM/8160/38 QM/8160/22 QM/8160/21 QM/8160/23 QA/8160/42 QM/8160/25 - QM/8160/28 QA/8160/40
200 QM/8160/35 QM/8160/38 QM/8200/22 QM/8200/21 QM/8200/23 QA/8200/42 QM/8160/25 - QM/8200/28 QA/8200/40
250 QM/8250/35 - QM/8250/22 QM/8250/21 QM/8250/23 - QM/8250/25 - QM/8250/28 -
320 QM/8320/35 - QM/8320/22 QM/8320/21 QM/8320/23 - QM/8320/25 - QM/8320/28 -
3 4 5 6 7 8 9 10
2 13 14 15 1 16
1 2 17
2 3 18
3 4 19
4 5 20
56 67 7 8 1 8 9 2 910 310 4 5 6 7 1 8 2 9 3 10 41 52 63 74 85 96 17
1 22 11 25
231 242 12 26
113 13 27
124 14 28
135 14615 29
15 8172 17
7161 16 91831118
191
10 412119202
513220 3
6143 4 8165 6
7154 5 91761110
718712819813920914 15
1010
11 12 16
13 17
14 18
15 19
16 21
ø Page 17 Page 17 Page 18 Page 18 Page 18 Page 18 Page 19 Page 19 Page 19 Page 32 & 33
1 32 20 352021 36
3311 PQA/802032/40
3412 13 22 37
21
14 2223 38
15 24 39
23
16 2425
11 25
17 26
1812 26 27
19132027
28
20 21
14
11 2829
11 22
15
12 2913
12 23
16 24
17
13 14 25
18
14 1515 16 26
19 2017
16 27
20 2118
17 28 2219
18 2923
19202020 24
21 25
22 26
23 27
24 28
25 22
32 QA/8032/41 M/P19493 QM/8025/32 QA/8032/33 QA/8032/27 M/P19931 M/P40310 M/P72816
40 20 PQA/802040/40
21
30 30 22 23 24
31 QA/8040/41
3132 32 25
33 3334 34
M/P19494 2035
26
35 272136
36 2822
37
QM/8040/32 29
3037
3823
20
3120
383924
21
QA/8040/33 21
32 25
22
33 26
22 2334
39QA/8040/27 27
23 2424 25
35 28
M/P19932 25
36 29
3026
373127
26 38
M/P40311 3228
27 28
39 302929
33
M/P7281634
31 35
32 36
33 37
34 38
35 33
50 PQA/802050/40 QA/8040/41 M/P19495 QM/8050/32 QA/8050/33 QA/8050/27 M/P19933 M/P40312 M/P72816
63 30 PQA/802063/40
31 32 33 34
QA/8063/41 35 3630 37
M/P19496 31 3832
QM/8050/32 393030 31
33 3431 QA/8063/27
QA/8063/33 3532 33
32 3633 34
37 3835 36
34 35
M/P19934 3936 3737 3838
M/P40313 3939
M/P72816
80 PQA/802080/40 QA/8063/41 M/P19497 QM/8080/32 QA/8080/33 QA/8080/27 M/P19935 M/P40314 M/P72816
100 PQA/802100/40 QA/8100/41 M/P19498 QM/8080/32 QA/8100/33 QA/8100/27 M/P19936 M/P40315 M/P72816 More Details see
page 32 & 33
125 PQA/802125/40 QA/8100/41 M/P19499 QM/8125/32 QM/8125/33 QM/8125/27 M/P19937 M/P71355 M/P72816
160 - QA/8160/41 M/P19679 QM/8160/32 QM/8160/33 QM/8160/27 M/P19938 M/P71356 -
200 - QA/8160/41 M/P19683 QM/8160/32 QM/8200/33 QM/8200/27 M/P19939 M/P71357 -
250 - - M/P19446 QM/8250/32 QM/8250/33 - - - -
320 - - M/P19447 QM/8320/32 QM/8320/33 - - - -
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.06 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Guide blocks
Guide blocks - plain bearings Guide blocks - roller bearings Guide blocks - plain bearings, Guide blocks - plain bearings,
long coupling short coupling
6 1 7 2 8 3 9 4 10 5 6 1 7 2 8 3 9 4 10 5 6 1 7 2 8 3 9 4 10 5 6 7 8 9 10
1611 1712 1813 1914 2015 1611 1712 1813 1914 2015 16 11 17 12 18 13 19 14 20 15 16 17 18 19 20
ø Page 20 Page 21 Page 23 Page 23
2520 2621 2722 2823 2924 2520 2621 2722 2823 2924 25 20 26 21 27 22 28 23 29 24 25 26 27 28 29
32 QA/8032/51/* QA/8032/61/* QA/8032/81/* QA/8032/85/*
3530 3631403732 QA/8040/51/*
3833 3934 3530 3631 3732 QA/8040/61/*
3833 3934 35 30 36 31 37 32 QA/8040/81/*
38 33 39 34 35 36 37 38 39
QA/8040/85/*
50 QA/8050/51/* QA/8050/61/* QA/8050/81/* QA/8050/85/*
63 QA/8063/51/* QA/8063/61/* QA/8063/81/* QA/8063/85/*
80 QA/8080/51/* QA/8080/61/* QA/8080/81/* QA/8080/85/*
100 QA/8100/51/* QA/8100/61/* QA/8100/81/* QA/8100/85/*
*) Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 and 500 mm, use the next bigger standard stroke.
Accessories for Profile (ø 32 ... 125 mm) & Round barrel (ø 32 ... 320 mm) Sevice kit
Model Model Port Banjo flow Straight fitting Elbow fitting Service kit for Round
Profile barrel Round barrel size control and Profile barrel
ø ø
PRA/802032/M/* RA/802032/M/* 32 G1/8 C0K510618 C02250618 C02470618 32 QA/8032/00
PRA/802040/M/* RA/802040/M/* 40 G1/4 C0K510628 C02250628 C02470628 40 QA/8040/00
PRA/802050/M/* RA/802050/M/* 50 G1/4 C0K510828 C02250828 C02470828 50 QA/8050/00
PRA/802063/M/* RA/802063/M/* 63 G3/8 C0K510838 C02250838 C02470838 63 QA/8063/00
PRA/802080/M/* RA/802080/M/* 80 G3/8 C0K511038 C02251038 C02471038 80 QA/8080/00
PRA/802100/M/* RA/802100/M/* 100 G1/2 C0K511248 C02251248 C02471248 100 QA/8100/00
PRA/802125/M/* RA/802125/M/* 125 G1/2 C0K511248 C02251248 C02471248 125 QA/8125/00
- RA/8160/M/* 160 G3/4 M840 (Inline) - - 160 QA/8160/00
- RA/8200/M/* 200 G3/4 M840 (Inline) - - 200 QA/8200/00
- RA/8250/M/* 250 G1 M855 (Inline) - - 250 QA/8250/00
- RA/8320/M/* 320 G1 M855 (Inline) - - 320 QA/8320/00
For alternative fitting types please contact the technical service.
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.07
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
A WH G G E
I2 PL l7 PL VA TG
KW I12 VD KV
EE
U2 U1
MM
KK
TG
BA
B
E
RT
SW I3 BH
EE
BG
2
RT
BG BH
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.08 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
ZJ + #
l8 + # E
A WH G G TG
l2 PL l7 PL KV
KW l12 VA
VD
U1 U2
MM
KK
BA
TG
B
E
RT
EE EE BH
BG
# Stroke
$ Piston rod extension
1 Cushion screw
2 ø 80 ... 320 mm
3 M/50 switches can be mounted flush with the profile
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.09
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
ø A -0,5 øB ø BA BG E EE G KK KW L2 L3 L7 L8 L12 ø MM PL TG
d11 d11 min h9
BH KV
32 22 30 30 16 6 47 G1/8 29 M10 x 1,25 17 5 19,5 4 6,6 94 5,5 12 15 32,5
40 24 35 35 16 6 53 G1/4 34,5 M12 x 1,25 19 6 22 4 5,6 105 6,5 16 21,5 38
50 32 40 40 16 8 65 G1/4 33 M16 x 1,5 24 8 25 5 1,6 106 8 20 22,7 46,5
63 32 45 45 16 8 75 G3/8 36,5 M16 x 1,5 24 8 25 5 3,6 121 8 20 24,2 56,5
80 40 45 45 17 19 95 G3/8 42 M20 x 1,5 30 10 33 - 1,8 128 10 25 29,7 72
100 40 55 55 17 19 113 G1/2 42 M20 x 1,5 30 10 35 - 3,8 138 10 25 27,7 89
125 54 60 60 20 24 140 G1/2 54 M27 x 2 41 13,5 44 - 1,8 160 13 32 39,7 110
160 72 65 65 28,5 32 183,5 G3/4 50 M36 x 2 55 18 58 - 10 180 16 40 25 140
200 72 75 75 28,5 32 224 G3/4 50 M36 x 2 55 18 67 - 10 180 16 40 26 175
250 84 90 90 35 36 280 G1 58 M42 x 2 65 21 80 - 4,5 200 20 50 28 220
320 96 110 110 30 46 350 G1 60 M48 x 2 75 24 90 - 4,5 220 24 63 31 270
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.10 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
I12
SW
D1
KF
MM
T2
AF
T1
ø AF ø D1 KF l12 ø MM h9 SW T1 T2
32 12 6,4 M6 5,5 12 10 16 2,6
40 12 8,4 M8 6,5 16 13 16 3,3
50 16 10,5 M10 8 20 17 21 4,7
63 16 10,5 M10 8 20 17 21 4,7
80 20 13 M12 10 25 22 25 6,1
100 20 13 M12 10 25 22 25 6,1
125 32 17 M16 13 32 27 38 8
For missing dimensions please see page 8, 9 and 10
Cylinder variants
PRA/802000/N2, RA/802000/N2 – Cylinder with Non-Rotating Piston Rod
PRA/802000/N2X, RA/802000/N2X – Cylinder with Non-Rotating Piston Rod and Female Piston Rod Thread
SW
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.11
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
ZM + 2x #
WH I8 + #
# Stroke
Cylinder variants
PRA/802000/MT, RA/802000/MT, RA/8000/MT, RA/8000/IT – Four Position Cylinder
PRA/802000/MTX, RA/802000/MTX – Four Position Cylinder and Female Piston Rod Thread
1
l10 + #1 + #2
l8 + #1 l11 l8 + #2
# Stroke
ø l8 l10 l11 Type Model Model
Mounting kit Profile barrel Round barrel
32 94 267 27 QA/802032/55 PRA/802032/MT/*/** RA/802032/MT/*/**
40 105 297 27 QA/802040/55 PRA/802040/MT/*/** RA/802040/MT/*/**
50 106 318 32 QA/802050/55 PRA/802050/MT/*/** RA/802050/MT/*/**
63 121 344 28 QA/802063/55 PRA/802063/MT/*/** RA/802063/MT/*/**
80 128 386 38 QA/802080/55 PRA/802080/MT/*/** RA/802080/MT/*/**
100 138 416 38 QA/802100/55 PRA/802100/MT/*/** RA/802100/MT/*/**
125 160 494 44 QA/802125/55 PRA/802125/MT/*/** RA/802125/MT/*/**
160 180 532 12 - RA/8160/MT/*/**
200 180 560 10 - RA/8200/MT/*/**
* Please insert stroke length 1; ** Please insert stroke length 2
Maximum stroke = stroke 1 + stroke 2; ø 32 = 700 mm, ø 40 = 1000 mm, ø 50 = 1000 mm, ø 63 = 900 mm, ø 80 = 1200 mm, ø 100 = 1100 mm, ø 125 = 1200 mm,
ø 160 = 1200 mm, ø 200 = 1100 mm; For missing dimensions please see page 8, 9 and 10
1 Mounting kit to connecting two standard cylinder to build four position cylinder
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.12 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
B 1
øA
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.13
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
ø AJ
AB l8 + # EE
AM
RT
øB
TG
E1
AN
VD AD AE AK
AF AG
AL
WH AH TG
# Stroke
ø AB AD AE AF AG AH ø AJ AK AL AM AN ø B e11 E E1 EE
32 32 12 8 40 4,2 48 25 M5 16 59 8 30 48 50 G1/8
40 35,5 12 10 46 4,5 55 24 M5 21 61,5 10 35 56 58 G1/8
50 49 16 15 54 11,5 70 30 M6 24 75,5 12 40 68 70 G1/8
63 49 15 15 55 7,5 70 38 M8 32 86 12 45 82 85 G1/8
80 62 16 16 70 10 90 53 M8 44 118 16 45 100 105 G1/8
100 65 18 16 70 10 92 53 M8 60 118 16 55 120 130 G1/8
125 85 27 25 95 11 122 65 M 10 75 140 20 60 140 150 G1/8
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.14 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
3 2 4 1
L
4°
BB
KK
KK
T SW
4°
B1 F
DD
L2
L
UF
TF
MF FB
AH
AT
AU AO ø AB
R
E
TR
E
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.15
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
LH CP
UB FL CG H 14 FM
CB H 14 L
SR
B3
JK h 9
R4
EK e 8
MR
L1
RK
CE CL R
ø CK h11
LE CM
TD e 9
UW 1
KK
CL
ER
D H11
TL TM h14
ø KK CE ø CK h11 CL CM ER LE RK (kg) Model (F) ø ø D H11 L1 R ø TD e9 TL TM h14 UW1 (kg) Model (FH)
32 M10 x 1,25 40 10 20 10 16 20 27,5 0,09 QM/8025/25 32 30 16 1 12 12 50 45 0,20 QA/8032/34
40 M12 x 1,25 48 12 24 12 19 24 33,5 0,13 QM/8040/25 40 35 20 1,6 16 16 63 55 0,38 QA/8040/34
50/63 M16 x 1,5 64 16 32 16 25 32 42 0,33 QM/8050/25 50 40 24 1,6 16 16 75 65 0,60 QA/8050/34
80/100 M20 x 1,5 80 20 40 20 32 40 51 0,67 QM/8080/25 63 45 24 1,6 20 20 90 75 1,10 QA/8063/34
125 M27 x 2 110 30 55 30 45 54 73,5 1,35 QM/8125/25 80 45 28 1,6 20 20 110 100 1,90 QA/8080/34
160/200 M36 x 2 144 35 70 35 57 72 94 3 QM/8160/25 100 55 38 2 25 25 132 120 3,50 QA/8100/34
250 M42 x 2 168 40 85 40 77 84 107 6,4 QM/8250/25 125 60 50 2 25 25 160 145 6,50 QA/8125/34
320 M48 x 2 192 50 96 50 88 96 123 8,7 QM/8320/25
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.16 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
ø TD e 9
UW
TK TL TM h 14
TK TL TM h 14
1 Grease nipple from ø 125 mm to ø 320 mm 1 Grease nipple from ø 125 mm to ø 200 mm
R R
øTD
øTD
UW
Trunnion support S
Conforms to ISO 15552, type AT4
ø R ø TD TK TL TM UW XV XV max. (kg) Torque Model (UH) øD 3
e9 max. h14 h14 min. + # (Nm)
ø D 1H7
T1
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.17
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
CE EX DL
CN H 7 EN h12
CX H 7
Z Z
Z Z
KK
R1
ER LE A EP MS
BR
FL
EW L
ø EB
PH
CD H 9
L2
BT
ø HB RA
TE UR
UL
MR
ø BR BT PH ø CK H9 ø EB EM GL
32 10 7 32 10 12 25,6 21
40 11 9 36 12 12 27,6 24 ø ø CD H9 EW FL L MR (kg) Model (R)
50 13 11 45 12 15 31,6 33 32 10 25,6 22 13 9 0,09 QA/8032/27
63 15 11 50 16 15 39,6 37 40 12 27,6 25 16 12 0,11 QA/8040/27
80 15 14 63 16 18 49,6 47 50 12 31,6 27 17 12 0,17 QA/8050/27
100 18 15 71 20 18 59,6 55 63 16 39,6 32 22 15 0,24 QA/8063/27
125 22 20 90 25 20 69 70 80 16 49,6 36 22 15 0,37 QA/8080/27
160 31 25 115 30 20 89 97 100 20 59,6 41 27 20 0,59 QA/8100/27
200 31 30 135 30 26 89 105 125 25 69,6 50 33 25 3,20 QM/8125/27
250 39 35 165 40 40 109 128 160 30 89,6 55 35,5 30 6,1 QM/8160/27
320 44 40 200 45 48 119 150 200 30 89,6 60 37 30 6,8 QM/8200/27
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
EM GL
ø CK G 7
BR
ø EB
PH
L2
BT
ø HB RA
TE UR
UL
EN -0,1 X
EU G1 15
ø CN H 7
ER M4 4
Z
Z
ø D3
CH
L5
H6
ø S5 G2
K1 G3
K2
X
6,8
0,8
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.19
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
1 AK + #
AJ
AD AO AV
AG AW
AX
Dimensions in mm
Projection/First angle
AE
AW
AR
AT
AP
AS
AL
AF
AG
1 AC
ø AM
AH
F AW AN
AG
# Stroke
1 Adjustment range
AZ
ø 32 & 40 = +2
ø 50 & 63 = +4
ø 80 & 100 = +6
BB
BA
ø AC AD AE AF AG AH AJ AK AL ø AM AN AO AP
32 69 12 15 17 M6 10 32,5 110 58 10 6 9 100
40 74 12 15 19 M6 10 38 122 64 12 6 11 106
50 91,5 15 22 24 M8 12 46,5 135 80 12 6 19 125
63 92 15 22 24 M8 12 56,5 153 95 12 7 15 132
80 106 15 27 30 M 10 15 50 180 130 16 9 14 165
100 111 15 27 30 M 10 17 70 199 150 16 9 19 185
1000
500
ø 100
ø 80
100
ø 63
50 ø 50
ø 40
ø 32
10
10 50 100 500 (mm)
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.20 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
1 CA + #
1 CB CC
CD
CE CF ±0,2
Dimensions in mm
CG CH ø DH H7 5 CK CY DD 5
VI
DM
Projection/First angle
ø DG
DC
CJ 6
DE ±0,2
ø DH H7 5
CW
CO -0,3
CX ±0,2
CR
CP
CS
DF
ø CV f7
CT ø DJ
2,5 +- 0,1
2 ø DH H7
3
2,5
CN DL
1 CI ø DK f6
CZ
CX ±0,2
# Stroke
CH 1 Adjustment range
ø 32 + 40 = +5
ø 50 ... 100 = +10
2 Safety zone 28 min
DB ±0,3
DA -0,3
3 Centering sleeve
4 Blanking plug (remove when using
locking catridges)
5 2,5 deep
6 Locking cartridge on request
ø CA CB CC CD CE CF ±0,2 CG CH CI CJ CK CN CO -0,3
32 177 100 65 28 12 15,3 6,5 M6 84,5 13 5 61 97
40 192 111 69 33 12 23 6,5 M6 88 15 6 67 115
50 237 128 65 40 15 33,8 9 M8 94 22 6 75,5 137
63 237 128 97 40 15 29,3 9 M8 98,5 22 6 80 152
80 280 151 112 50 20 37 11 M 10 114 27 7 92 189
100 280 156 112 55 20 40,5 11 M 10 115,5 27 7 93 213
* Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 and 500 mm, use nearest standard stroke.
Note: Supplied complete with mounting screws for cylinders
*1) Locking cartridges should be ordered separately. Passive - pressure to unlock. Two required per guide block.
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.21
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
f
2 2
Maximum load capacity is dependent on the outstroke of a horizontally The total deflection of guide rods will be determined by the addition of that
installed guide unit. In the case of short stroke operation, the load due to own weight (diagram 3) and that due to load capacity (diagram 4).
capacity figures taken from the diagram must be multiplied by the
correction factor (diagram 2). In the curves of load capacity (diagram 1),
the short stroke corrections have already been taken
into account for an outstroke > 60 mm.
Maximum load capacity depending on outroke Deflection caused by own Deflection caused by a
(diagram 1) (diagram 2) weight (diagram 3) load of 10 N (diagram 4)
(N) f f
ø 32
300 0,8 1,5 1,5
ø
80
200 – ø 40
10 0,7 1,0 1,0
ø 0
50 ø 50 – 63 ø 40
ø –
40 63 ø 80 – 100
100 ø3 0,6 0,5 0,5
2 ø 50 – 63
ø 80 – 100
0 0,5 0 0
0 100 200 300 400 500 600 (mm) 0 20 40 60 (mm) 0 100 200 300 400 500 600 (mm) 0 100 200 300 400 500 600 (mm)
Outstroke Stroke Outstroke Outstroke
In the case of shock load applications, the figures given in hte diagrams above must be reduced by a factor of 2.
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.22 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
1 CA + #
1 CB CC
CD
CE CF ±0,2
CG CH CK DD Dimensions in mm
DM
Projection/First angle
DC
CY
CJ
DE ±0,2
CO -0,2
CX ±0,2
CW
CR
CP
CS
DF
ø CV f7
CT
1 CL
1 CI
CZ
CX ±0,2
CH
DB ±0,3
DA -0,3
# Stroke
1 Adjustment range
ø 32 + 40 = +5
ø 50 ... 100 = +10
ø DA ±0,2 DB ±0,3 ø DC ø DD DE ±0,2 DF DM (kg) /81 (kg) /85 (kg) /81; /85 Model Model
at 0 mm at 0 mm per 100 mm /81 /85
32 49 45 6,6 11 78 M6 12 1,2 1,15 0,18 QA/8032/81 QA/8032/85
40 58 55 6,6 11 84 M6 12 2,2 2,15 0,32 QA/8040/81 QA/8040/85
50 70 65 9 15 100 M8 16 3,6 3,55 0,49 QA/8050/81 QA/8050/85
63 85 80 9 15 105 M8 16 4,6 4,55 0,49 QA/8063/81 QA/8063/85
80 105 100 11 18 130 M 10 20 8,7 8,65 0,77 QA/8080/81 QA/8080/85
100 130 120 11 18 150 M 10 20 11 10,95 0,77 QA/8100/81 QA/8100/85
* Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 and 500 mm, use nearest standard stroke.
Note: Supplied complete with mounting screws for cylinders
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.23
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
f
F 1(N)
2 2
1 Centre of gravity load capacity
2 Outstroke
F (N)
F1 = F x 0,9
Static force: F2 = F x 2
Max. load capacity (diagram 1) is dependent on The total deflection of guide rods will be determined by
the outstroke of a horizontally installed guide unit. the addition of the amount of deflection caused by own
weight (according to diagram 2) plus the amount of
deflection due to load capacity (according to diagram 3).
Maximum load capacity depending on outroke Deflection caused by own Deflection caused by a load
Deflection caused by a load of 10 N weight of 10 N
(diagram 1) (diagram 2) (diagram 3)
Load capacity Deflection (mm) Deflection (mm)
(N) f f
(N)
500 1,0 2,5 2,5
ø 32
400 0,9 2,0 2,0
1000
ø 32
300 0,8 1,5 1,5
800 ø8
ø 0
ø5 80 - 100
600
200 0 –ø ø 40
1063 0,7 1,0 1,0
ø 0
50 ø 50 – 63 ø 40
400 ø – 6ø 40
40 3 ø 80 – 100
100 ø3 0,6 0,5 0,5
200 2 ø 32 ø 50 – 63
ø 80 – 100
00 0,5 0 0
500 100 200
100
300 400 200 300
500 600 (mm) 400
0 20 50060 (mm)
40 (mm) 0 100 200 300 400 500 600 (mm) 0 100 200 300 400 500 600 (mm)
In the case of shock load applications, the figures given in hte diagrams above must be reduced by a factor of 2
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.24 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Technical features
Operation: Contact resistance: Vibration resistance: Materials:
M/50/LSU Normally open 150 mΩ 35 g (at 2000 Hz) Body: plastic
with LED (yellow) Response time: Cable type: Cable: see table below
Switching voltage (Ub): 1,8 ms 2 x 0,25: PVC, PUR or silikone
10 ... 240 V a.c./170 V d.c. Operating temperature: 3 x 0,25 PVC
Switching voltage output: -25 ... +80°C (-13 ... +176°F) Cable length:
Ub - 2,7 V High temperature version: 2, 5 or 10 m
Switching current +150°C max.(+302 °F) Electromagnetic compatibility
(see graph overleaf): Protection rating (EN 60529): according to:
0,18 A max. IP66 EN 60947-5-2
Switching power: Shock resistance:
10 W/10 VA max. 50 g (during 11 ms)
Technical data - Reed switches - additional information see data sheet en 4.3.005
Symbol Voltage Current Function Operating LED Protection Plug Cable Cable Weight Model
maximum temperature class length type
(V a.c.) (V d.c.) (mA) (°C) (m) (g)
+
~ BN 10 ... 240 10 ... 170 180 Normally open -25 ... +80 • IP 66 — 2, 5 or 10 PVC 2 x 0,25 37 M/50/LSU/*V
10 ... 240 10 ... 170 180 Normally open -25 ... +80 • IP 66 — 5 PUR 2 x 0,25 37 M/50/LSU/5U
~ BU
10 ... 240 10 ... 170 180 Normally open -25 ... +150 — IP 66 — 2 Silicon 2 x 0,25 37 TM/50/RAU/2S
BN
BU
BK 10 ... 240 10 ... 170 180 Changeover -25 ... +80 — IP 66 — 5 PVC 3 x 0,25 37 M/50/RAC/5V
BU
BN
1
+ BN 10 ... 60 10 ... 60 180 Normally open -25 ... +80 • IP 66 M8 x 1 0,3 PVC 3 x 0,25 16 M/50/LSU/CP *1)
~
10 ... 60 10 ... 60 180 Normally open -25 ... +80 • IP 66 M12 x 1 0,3 PVC 3 x 0,25 16 M/50/LSU/CC *1)
4
~ BK
* Insert cable length; *1) Plug-in connector see page 12
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.25
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Dimensions Dimensions in mm
M/50/LSU/*V, M/50/LSU/5U, Projection/First angle
TM/50/RAU/2S
Cable length L = 2, 5 or 10 m
A-B
L +30
5,1 1 30 50 +10
A
ø 6,4
1,5
B 2
M/50/RAC/5V
Cable length L = 5 m
A-B
L +30 50 +10
5,1 1 30
A
ø 6,4
1,5
B 3
M/50/LSU/CP
M/50/LSU/CC
A-B 300 ±15 X
5,1 1 30 31,5 ... 36 4 BK
A
ø 6,4
X
1,5 1 BN 3 BU
B 4
1 ixing screw
F
2 + BN = brown; - BU = blue (output)
3 - BK = black; + BN = brown; - ≠BU = blue
4 Version CP: Plug M8 x 1, color code: BK = +; BN = -; BU = output
Version CC: Plug M12 x 1, color code: BK = +; BN = -; BU = output
Accessories
Plug-in connector cable with nut
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.26 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Technical features
Operation: Switching current
M/50/EAP (PNP) open collector (see graph overleaf): Operating temperature: Materials:
output with LED (yellow) 100 mA max. -40 ... +80°C (-40 ... 176°F) Body: plastic
M/50/EAN (NPN) grounded Switching power: (IP67 & IP68) Cable: see table below
emitter output with LED (yellow) 4,5 W max. Cable type:
M/50/IOP (PNP) Easy IO-Link open Response time: PVC 3 x 0,12 (standard)
collector output with LED (yellow) < 0,5 ms for EAP switch PUR 3 x 0,14 (M/50/EAP/5U)
Switching voltage (Ub): < = 1 ms for IOP switch Cable length:
10 ... 30 V d.c. Operating frequency: 2, 5 and 10 m
Switching voltage output: 1 kHz Electromagnetic compatibility
Ub - 2 V Protection rating (EN 60529): according to:
Inducted voltage: IP67 (standard) EN 60947-5-2
0,5 V IP68 for type: M/50/EAP/5U
BU
10 ... 30 100 NPN -40 ... +80 • IP67 — 2, 5 or 10 PVC 3 x 0,12 37 M/50/EAN/*V
+ BN
npn
A
BK
3
+ BU
10 ... 30 100 NPN -40 ... +80 • IP67 M8 x 1 0,3 PVC 3 x 0,14 16 M/50/EAN/CP *1)
1
BN
npn
4
A
BK
* Insert cable length; *1) Plug-in connector below; Color code: BK = black, BN = brown, BU = blue
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.27
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Dimensions Dimensions in mm
M/50/EAP/*V, Projection/First angle
A-B
M/50/EAN/*V L +30 42 ±4
M/50/IOP/5V
Cable length L = 2, 5 or 10 m 5,1 1 30
A
ø 6,4
1,5
B 2
X
1,5 1 BN 3 BU
B 3
X
1,5 1 BN
4
1 Fixing screw
2 Color code: BK = black; BN = brown; BU = blue
3 Plug M8 x 1
4 Plug M12 x 1
Accessories
Plug-in connector cable with nut
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.28 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Technical features
Operation: Contact resistance: Shock resistance: Materials:
TQM/31, QM/32 normally open 100 mΩ 50 g (during 11 ms) Body: plastic
with LED (yellow) Response time: Vibration resistance: Cable: see table below
Switching voltage (Ub): 3 ms 35 g (50 to 2000 Hz)
10 ... 240 V a.c./d.c. Operating temperature: Cable type:
Switching voltage output: -20 ... +80°C (-4 ... +176°F) PVC 2 x 0,75, PUR 2 x 0,75
Ub - 2 V (QM/32) High temperature version: VMQ 2 x 0,75 (TQM/31)
Switching current (see graph +150°C max. (TQM/31) (+302°F) Cable length:
overleaf): Protection rating (EN 60529): 2, 5 or 10 m
1 A max. (QM/32) IP 66 Electromagnetic compatibility
Switching power: according to:
50 W/50 VA max. EN 60947-5-2
Technical data - Reed switches - additional information see data sheet en 4.3.021
Symbol Voltage Current Function Temperature LED Protection Features Cable Cable Weight Model
maximum class length type
(V a.c./V d.c.) (A) (°C) (m) (g)
+ BN 10 ... 240 1 Normally open -20 ... +80 • IP 66 — 2, 5 or 10 PVC 2 x 0,75 108 (2 m) QM/32/*
~
10 ... 240 1 Normally open -20 ... +80 • IP 66 — 2 PUR 2 x 0,75 108 QM/32/2/PU
~ BU
10 ... 240 2 Normally open -20 ... +150 — IP 66 High temperature 2, 5 or 10 Silicon 2 x 0,75 102 (2 m) TQM/31/*
BN
BU
1 10 ... 240 1 Normally open -20 ... +80 • IP 66 Plug M12 x 1 — — 15 QM/32/P *1)
+ BN
~
4
~ BK
Technical data - Solid state - additional information see data sheet en 4.3.025
Symbol Voltage Current Function Temperature LED Protection Features Cable length Cable Weight Model
maximum class type
(V d.c.) (mA) (°C) (m) (g)
10 ... 30 200 PNP -20 ... +80 • IP 66 — 2, 5 or 10 PVC 3 x 0,5 102 (2 m) QM/132/*
+ BN
BU 10 ... 30 200 PNP -20 ... +80 • IP 66 — 5 PUR 3 x 0,34 QM/132/5/PU
pnp
A
BK
1 10 ... 30 200 PNP -20 ... +80 • IP 66 Plug M12 x 1 15 QM/132/P *1)
3
+ BN
BU
pnp
4
A
BK
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.29
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Dimensions Dimensions in mm
TQM/31, QM/32, QM/132 QM/32/P, QM/132/P Projection/First angle
35 35 2
1 27 1 27 A
M1
X X
2x
1
24
24
20
20
16
16
8
15 30 15
32
X A
3 3,5
1
ø 5,8
ø 3,2
1 BN
4 BK
5,8
3 BU
1 LED (yellow)
2 Plug M12 x1
Color code
BK = black
BN = brown
BU = blue
Accessories
Plug-in connector cable with nut
L 1
A
B
2
1 Bracket
2 Switch
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.30 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Technical features
Medium: Vibration resistance: Operating temperature: Materials
Compressed air, filtered and 10 ... 50 Hz (to IEC 68 T. 2-27) -15 ... +60°C (+5 ... +140°F) Body: Plastic
non-lubricated Shock resistance: Humidity and water content: Pipe connectors: Brass
Operation: 500 m/s2 over a period of Air supply must be dry. Holding strap: CU ZU 37 (brass)
Pneumatic proximity switch for 5 ms (to IEC 68 T. 2-27) Corresponding of the application
non-contact sensing via a Flow rate: and working conditions the air
magnetic field 40 l/min must be dry enough to avoid con-
Operating pressure: Orifice size: densate. The pressure dewpoint
2 ... 6 bar (29 ... 87 psi) 2 mm must be minimum 15°C under the
Connections: Repeatability: application and working conditions.
Pipes for 3 mm l/D tubing ± 0,2 mm
Can be used with cylinder:
ø 10 ... 100 mm
Pneumatic proximity sensor - additional information see data sheet N/en 4.3.061
Symbol Operating pressure Flow rate Orifice size Optical indicator Connections Model
(bar) (l/min) (mm)
2 2 ... 6 40 2 • Pipes for 3 mm l/D tubing QM/140
1 3
Dimensions
34 6,5
4
M4
1,5
1
4
2
8
12
3
18
17
9,5
7,5
4 15 15
9 17
14,5
18
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.31
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
ø A A (kg)
32 22 0,020
40 23 0,020
50 22 0,020
63 24 0,020
80 23 0,020
100 24,5 0,020
C F
H
E
A
D G
ø A B C D E F G H J K SW (kg) Model
50/63 60 37 7 4,5 46 8,5 5,5 43 12 M4 3 0,08 PQA/802050/22/54
80/100 90 37 7 4,5 76 8,5 6,5 70 12 M4 3 0,11 PQA/802080/22/54
125 135 37 7 4,5 121 8,5 6,5 115 12 M4 3 0,16 PQA/802125/22/54
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.32 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
B1
L1
L2 30
G SW 3
H
SW 2
ø B1 B2 H L1 L2 G kg Model
63 61,5 77,5 50 17 4,5 M4 0,13 QA/8063/22/55/4
63 61,5 77,5 50 17 4,5 M5 0,13 QA/8063/22/55/5
63 61,5 77,5 50 17 4,5 M6 0,13 QA/8063/22/55/6
80 78 94 59,5 17 4,5 M4 0,14 QA/8080/22/55/4
80 78 94 59,5 17 4,5 M5 0,14 QA/8080/22/55/5
80 78 94 59,5 17 4,5 M6 0,14 QA/8080/22/55/6
100 97 113 68 17 4,5 M4 0,19 QA/8100/22/55/4
100 97 113 68 17 4,5 M5 0,19 QA/8100/22/55/5
100 97 113 68 17 4,5 M6 0,19 QA/8100/22/55/6
125 120 136 80 17 4,5 M4 0,21 QA/8125/22/55/4
125 120 136 80 17 4,5 M5 0,21 QA/8125/22/55/5
125 120 136 80 17 4,5 M6 0,21 QA/8125/22/55/6
160 156 175 101,5 17 4,5 M4 0,28 QA/8160/22/55/4
160 156 175 101,5 17 4,5 M5 0,28 QA/8160/22/55/5
160 156 175 101,5 17 4,5 M6 0,28 QA/8160/22/55/6
200 194 231 119 17 4,5 M4 0,31 QA/8200/22/55/4
200 194 231 119 17 4,5 M5 0,31 QA/8200/22/55/5
200 194 231 119 17 4,5 M6 0,31 QA/8200/22/55/6
Our policy is one of continued research and development. We therefore reserve the right to amend,
03/18 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH en 1.5.220.33
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
Recommended Valves
Recommended Valve Range
EN - Englisch
Warning
These products are intended for use in industrial compressed air systems Through misuse, age, or malfunction, components used in fluid power
only. Do not use these products where pressures and temperatures can systems can fail in various modes. The system designer is warned to
exceed those listed under »Technical features/data«. consider the failure modes of all component parts used in fluid power
Before using these products with fluids other than those specified, for systems and to provide adequate safeguards to prevent personal injury
non-industrial applications, life-support systems or other applications not or damage to equipment in the event of such failure.
within published specifications, consult System designers must provide a warning to end users in the system
IMI Precision Engineering, Norgren GmbH. instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific warnings
found in instruction sheets packed and shipped with these products.
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 1.5.220.34 without notice, the specifications given in this document. (2016 - 9159h) © 2015 Norgren GmbH 03/18