You are on page 1of 2

03 B 103 CE 8302 Reg. No.

9635 – STELLA MARY’S COLLEGE OF ENGINEERING


103-DEPARTMENT OF CIVIL ENGINEERING

INTERNAL EXAM-I (2018 – 19ODD)

II Year / III Semester

CE 8302 FULID MECHANICS


Date: 17.08.2018 & Time: 09.00AM to 10.30 AM Max. : 50 Marks
Note:

 Write the examination using blue or black pen


 Draw neat sketch with pencil (if necessary)
 Use tables or charts (if necessary)
 Answer all questions
Part A (5x2=10 marks)

Answer All Questions

1. what is the difference between an ideal and a real fluid. (CO1)

2 .Define vacuum pressure and give its mathematical expression (CO1)

3. write down the conditions needed for the floating body to be remaining in unstable,

Stable and neutral equilibrium. (CO1)

4.Distinguish between uniform flow and non-uniform flow . (CO2)

5. state Bernoulli’s theorem as applicable to fluid flow (CO2)

Part B

Answer All Questions. Each questions carries 10 Marks

6.Two large inclined parallel planes are kept 8mm apart and is filled with oil. The parallel planes

Are inclined at 30̊ to the horizontal. A small thin square plate of 75mm side slides freely down

Parallel and Midway between the inclined planes with a constant velocity 2.5m/s due to its own

Weight of 1.5N. Determine the viscosity of the oil. (CO1)

7. A rectangular tank 5m long,2m depth and 2.5m width contains water to a depth of 1.2m .The tank over
horizontally in the direction of length of the tank with a constant linear acceleration of 2.25m/s^2.

Calculate:

i) The slope of the free surface with horizontal.


ii) The maximum and minimum pressure intensities at the bottom.
iii) The total force due to the water acting in each end of the tank.

103 – CE <Internal Exam – I> 9635 – SMCE Page 1 of 1 Anna University, Chennai
iv) Show that the difference between these forces equals the unbalanced force necessary to accelerate
the liquid mass. (CO1)

8. Write the Bernoulli’s equation in detail. (CO2)


Part C

Answer All Questions. Each questions carries 10 Marks

9. In a two dimensional potential flow ,the velocity potential is given by θ =4x (3y-4) determine the velocity at
the Point (2,3).determine also the value of stream function ψ at the point (2,3). (CO2)

Prepared by Verified by HOD

103 – CE <Internal Exam – I> 9635 – SMCE Page 2 of 1 Anna University, Chennai

You might also like