Professional Documents
Culture Documents
I.D.
Trainee’s No. 2022-011-03
This will be collected by your trainer and submit the same to the
Vocational Instruction Supervisor (VIS) and shall form part of the
permanent trainee’s document on file.
THANK YOU.
NOTES:
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
Unit of Competency: 1 Prepare unit, tools and workplace for acquired as per
installation / servicing. standard procedure.
Repair/
maintenanc
NC Level II e history is
verified in
Learning Outcome Task/ Date Instructor line with the
Activity Accomplished Remarks company
Required procedures.
Workplace
Complete is
check-up of set/prepare
consumer d for
electronic installation
products job in line
and with the
systems are client’s
conducted and requirements.
defects are
identified, verified Necessary
and tools, test
instruments
documented against and
customer personal
protective
description.
equipment
Manuals are
and service prepared in
information line with job
required for requirement
installation s
are
job requirements.
Unplanned
events or ________________ ________________
conditions
are Trainee’s Signature Trainer’s signature
responded
to in
accordance
with established
procedures
Work site is
cleaned
and cleared
of all debris
and left
safe in
accordance with Unit of Competency: 3 Diagnose faults and defects of industrial
the company electronic modules/products/systems
requirements
Learning Outcome Task/Activity Date Instructor
Report on Required Accomplished Remarks
installation
and testing Systemati
of c pre-
equipment testing
is prepared procedur
according to e is
company’s observed
procedures/policies in
accordan
ce
with
manufacturer’s and
instructions. isolated
using
System specified
defects/F testing
ault procedures
symptom
s are Identified
identified defects
using and faults
appropria are
te explained
tools and to the
equipment and responsib
le
troubleshooting
person in
techniques and in
accordance with
accordance with enterprise or
safety procedures company policy
and
Test
instrume procedures
nts
required Control
for the settings/a
job are djustmen
used in ts are
accordan checked
ce with in
user manuals. conformit
y with
Circuits service-manual
are specifications.
checked
Results of Learning Outcome Task/Activity Date Instructor
diagnosis Required Accomplished Remarks
and
testing Personal
are protectiv
documen e
ted equipme
accuratel nt is used
y and in
completely within accordan
the specified time. ce with
Occupational
Customer Health and Safety
s are practices.
advised/i
nformed Electro-
regarding static
the status discharge
and (ESD)
serviceabil protectio
ity of the n
unit procedur
according e is
to followed
procedure in
s. accordance with
current industry
standards.
Defective
Unit of Competency: 4 Maintain/Repair industrial electronic
parts/co
products
mponent
s are
NC Level II
replaced
with performe
identical d within
or the
recommended required
appropriate timefram
equivalent ratings e
Care and
Repaired extreme
or precautio
replaced n in
parts/co handling
mponent the
s are unit/prod
soldered/ uct is
mounted observed as per
in procedures
accordance with
the current Cleaning
of unit is
industry
performe
standards. d in
accordan
Control
ce with
settings/a
standard
djustmen
procedures
ts are
performe Excess
d in compone
conformit nts and
y with materials
service-manual are
specifications disposed
of based
Repair on
activity is
WEEE Learning Outcome Task/Activity Date Instructor
directives Required Accomplished Remarks
and 3Rs
waste Repaired
managem units are
ent reassemb
program led
according
to
procedur
es
Reassem
________________ ________________ bled units
are
Trainee’s Signature Trainer’s signature subjected
to final
testing
and
cleaning
in
conformity with
manufacturer’s
specifications
Service
completio
n
procedur
es and
Unit of Competency: 5 Reassemble and test repaired industrial documen
electronic product tations
are
NC Level II complied
with based on
manual.
Waste
materials
are
disposed
of in
accordan
ce with
environmental
requirements
________________ ________________