Professional Documents
Culture Documents
Questions:
Questions:
A) What is the IHP?
B) What is the BHP?
C) What is the bmep?
D) What is the stroke to bore ratio?
PART 2
x2-7=-y2 -x2-7=-y2
CHOICES: Bulk Density, Particle Density, Apparent Specific Gravity, Real Specific Gravity
1. Ratio of the weight of grains that fell out from the machine during threshing operation, to the weight of the
total grain input of the thresher, expressed in percent.
4. A component of the dryer in which the velocity pressure of the air is converted into static pressure to
obtain a much uniform air distribution in the chamber.
Choices: Fan or blower, Plenum chamber, Heat exchanger, Gradient
5. An air-moving device commonly used for drying which produces high pressure but low airflow.
Choices: Blower ,Fan, Compressor
6. The layer of aggregate, soil-treated aggregate, treated soil, or soil aggregate that rests upon the
Subbase or if no Subbase, upon the sub-grade. Treatment may include application of chemical-based
soil additives such as soil-stabilizers and/or any approved method
11. 3 phase, 50 kW, 60 Hz, 4 poles and 1800 rpm. How much voltage will be needed for the motor.
12. 780,700 pesos is the total cost of the project. How much is the mobilization fund for contractors for the
infrastructure?
13. 12 ohms, 6 ohms and 4 ohms are connected in parallel. Find total resistance.
14. Radiative heat loss perfect reflector equals to unity. CHOICES: Absorptivity, Reflectivity, Transmitivity
17. Years due for initial certification for re-use of waste water. CHOICES: 6 months, 1 year, 2 years
22. Rice grain from which the hull, the germ, the outer bran layers and the greater part of the inner bran
layers have been removed, but parts of the lengthwise streaks of the bran layers may still be present on
less than 20% of the sample grains. CHOICES: well milled rice, regular milled rice, fancy rice,
undermilled rice
27. When enthalpy is constant it is called ? CHOICES: enthalpic, entropic, isobaric, isochoric
28. Chamber wherein air pressure is developed for uniform distribution of the heated air through the grain
mass. CHOICES: plenum, gradient
29. Control shortcut when you want to paste the entity in Autocad.
30. The surface dimension below the container is 2 m x 3 m with a mass of 20,000 kg. What is the force
exerted below the container? CHOICES: 196.2 kN, 196.2 N