Professional Documents
Culture Documents
1. Warranty for the construction and durability of mechanical rice thresher according to PAES shall
be within ______ after the purchased of the machine.
a. 6 months c. 12 months
b. 18 months d. 24 months
2. It is part of the moldboard plow that receives the furrow slice from the share and turns to break,
crush, and pulverize the soil.
a. Share c. moldboard
b. Shin d. all of the above
3. The part of the moldboard plow which is used to cut the soil.
a. Share c. moldboard
b. Shin d. all of the above
4. It is part of the plow bottom which helps to counteract the side pressure exerted by the furrow
slice.
a. Shin c. Share
b. Landside d. all of the above
5. A tillage operation traditionally performed in preparing a seedbed for a given crop and grown in
a given geographical area.
6. A machine that cut rice stalks and places them on a windrow when they are gathered and bound
into sheaves and carried to a thresher.
a. Scythe c. Reaper
b. Stripper harvester d. Combines
7. Throw-in type of thresher which allows the cut plants to move in a helical manner around the
threshing cylinder with a net effect of moving the material axially between the feeding and
discharge outlets.
a. Axial flow thresher c. Hold on thresher
b. Through flow thresher d. Mixed flow thresher
8. Type of mechanical rice thresher wherein the panicles of the cut plants are fed into the
threshing chamber while the stalks are mechanically or manually held during the threshing
operation.
9. Type of mechanical rice thresher which detaches and separates the grains from the panicles by
feeding the cut plants into the machine.
10. Throw-in type of thresher wherein cut plants are fed between the rotating cylinder and
stationary concave and the threshed materials/straws are discharged out of the threshing
chamber tangentially.
11. A soil tool reaction in which the soil slides over the surface of the tillage tool without significant
adhesion.
a. Sliding c. Scouring
b. Soil cutting d. Nota
12. Warranty of parts and services for heated-air mechanical grain dryer based on PAE Standard is
within _________ after the acceptance of the machine.
a. 6 months b. 12 months
b. 18 months d. 24 months
13. In testing agricultural machines as prescribed in the PAES standard of test, it should be operated
by ________.
15. The act of analyzing, testing, and measuring the engine to remedy the cause and trouble.
16. The standard length of stroke of hydraulic remote control cylinder for trailing type agricultural
implement is ________.
a. 6 to 12 inches c. 8 to 16 inches
b. 10 to 20 inches d. Nota
19. It is the ratio of the weight of the weight of cleaned threshed grain to the grain input.
21. When soils are thrown away from the plants during cultivation, the operation is
a. Hilling-up c. Sweeping
b. Barring-off d. Listing
a. Gears c. Bearing
b. Synchronizing gears d. universal joints
27. Select two consecutive farm operations which when done mechanically can increase cropping
intensity:
30. In the Philippines, agricultural machinery manufacturing like AMMDA is of what type of
proprietorship?
31. What is the capitalized cost if a structure costs P1,500,000 and requires an annual maintenance
of P150,000 and the interest rate is 15%?
a. P2,500,000 c. P1,150,000
b. P2,150,000 d. P1,750,000
32. Addressed to all Provincial Governors, City/Municipal Mayors, Sanggunians and DILG Regional
Directors for the ---“ INSTITUTIONALIZATION OF AGRICULTURAL ENGINEERING PROFESSION IN
THE LGUS SUPPLEMENTING DILG MC NO. 2001-25 RE: IMPLEMENTATION OF RA. NO. 8559.”
- DILG Memo Circular No. 2008-167