Professional Documents
Culture Documents
PERANCANGAN KURSUS
COURSE OUTLINE
MAKLUMAT KURSUS
COURSE INFORMATION
Nama (Name) : SAIFUL BAHARI BIN SABRI Nama (Name) : KAMARUL ZAMAN BIN ISMAIL
MATLAMAT (GOALS):
The aims of this course is to develop the participant’s knowledge and skills so they are prepared to assist and influence the
development and implementation of a workshop management and workplace safety programme according to NIOSH regulation.
SINOPSIS (SYNOPSIS):
Occupational Safety and Health, Material Handling, Machine Shop Risk Assessment, Safety during Machine Use, Design and
Management of Workshop, Business Organization and Management, Tools Management Control.
Practical:
1) Fire Drill
2) A Form of accident (6 HOURS)
Practical:
KURIKULUM DMA 2021 3 DMA 1132
KOLEJ VOKASIONAL SUNGAI PETANI 1
JABATAN TEKNOLOGI MEKANIKAL DAN PEMBUATAN
15 STUDY WEEK
16 FINAL EXAMINATION WEEK
17 FINAL EXAMINATION WEEK
PENILAIAN (ASSESSMENT):
Hasil Pembelajaran
2. ASSIGNMENT 10% - -
60% 35% 5%
Jumlah (Total)
100%
CONTENT C C WRI AS
C
L L TTE SI
L
O O N GN CASE STUDY
O
TES ME
3
1 2 T NT
Remark:
1. 40 Notional hours is equivalent to 1 credit.
2. Written Test:: 60 minutes
3. Assignment: -
4. Case Study: -
5. Theory Examination: 120 minutes
RUJUKAN (REFERENCES):
Jabatan (Department) : Jabatan Teknologi Mekanikal dan Pembuatan Matrik ini perlu digunakan bersama:
Kod Kursus (Course Code) : DMA 1132 2. Hasil Pembelajaran Program (PLO)
P P Kaedah Kaedah
Bil. P P P P P P P P P Penyampaian Pentaksiran
Hasil Pembelajaran Kursus L L
(No.) L L L L L L L L L (Method of (Method of
(Course Learning Outcomes) O O KPI
O O O O O O O O O Delivery) Assessment)
1 1
1 2 3 4 5 6 7 8 9
0 1
Practical Session,
Case Study,
Demonstrate workshop Project, Group 100% of
2 activities related to the P3 Work, Discussion Case Study students scored
knowledge of workshop safety and Student more than 50%
and procedures. (P3, PLO2) Centered Learning
Activities.
Case Study,
3 Perform relevant knowledge of A2 Case Study 100% of
Project, Group
workshop safety and Work, Discussion students scored
DMA1132 8
and Student
management in managing
Centered Learning more than 50%
machine shop. (A2, PLO9) Activities.
Total 1 1 1
DMA1132 9