Professional Documents
Culture Documents
Introduction
This Special Instruction outlines the various forms of product marking on Reman products. Each product will be marked with a part number, serial
number or date code, and other manufacturing facility-specific markings. When reporting a possible quality issue on a remanufactured product, or
requesting troubleshooting assistance, it is helpful to provide photos of these product markings. This document contains some examples of Cat®
Reman product markings, and is not intended to be all inclusive. If the product does not have a Reman part number, it is likely a new part
substituted for a Reman order.
Table 1
The letter(s) listed in the left column of Table 1 indicate the manufacturing source listed in the right column for corresponding products identified
throughout this document.
NUMERALKOD
N U M E R A L K O D
0 1 2 3 4 5 6 7 8 9
Table 2
Several products identified throughout this document are marked with a date code using the NUMERALKOD format. The letters in the top row of
Table 2 correspond with the values in the bottom row as shown.
Package Label
If a problem is noticed upon receipt, a photo of the package label is helpful to identify the packaging date code, packager, country of origin and
sometimes a serial number.
Illustration 1 g03876193
1 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Reman Engines
Reman engines are fitted with a serial number plate which includes the part number, engine model, Reman engine serial number, reference serial
number, and additional performance information.
The Reman engine serial number is used for warranty claims if the engine is a prime product (On-Highway, Industrial, Marine Propulsion).
For captive engines (Cat Machines, Marine Auxiliary, Genset Engines), this engine serial number allows information to be found in the Technical
Marketing Information system (TMI), but is not used to file warranty claims. Claims should be filed on the prime product serial number ( Cat
Machine, Package Genset, etc.), and the Reman engine serial number should be recorded in the "Component Serial Number" field.
Illustration 2 g03881245
Illustration 3 g03876200
This example shows:
(-) Part Number: 20R-0768
(-) Serial Number: KEM00309
Illustration 4 g03876206
2 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
In 2012, Reman short and long blocks added a serial number. This was required for traceability to meet governmental emissions regulations.
Short and long blocks do not have data in TMI and this serial number is not used to file warranty claims. Claims should be filed on the prime
product serial number and the Reman short or long block serial number should be recorded in the "Component Serial Number" field.
Illustration 5 g03876213
This example shows:
(-) Part Number: 10R-9210
(-) Date Code: 04214 (42nd day of 2014)
(-) Serial Number: 16900197
(-) Refer to Table 1
Note: This plate is used for all Reman blocks and cranks, though some sizes may not apply. The engine information plate is used for various
products, the various markings will apply uniquely to each vintage.
Illustration 6 g03876219
This plate indicates:
(-) The dimension of the crank bore (standard or oversized measurement)
(-) The dimension of the crankshaft (standard or undersized measurement)
The part number and date code may be located in various locations on the cylinder head casting and may not be visible when the head is
3 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 7 g03876239
This example shows:
(-) Part Number: 10R-7765
(-) Date Code: 307 11 3 (307th day of 2011, third shift)
(-) Source Facility Code: no other letters indicate it was remanufactured in the United States
(-) Refer to Table 1
Illustration 8 g03876241
This example shows:
(-) Part Number: 10R-8844
(-) Date Code: 199 09 (199th day of 2009)
(-) Source Facility Code: E (Shrewsbury, England)
(-) Refer to Table 1
If a Reman part number (for example, 0R, 10R, 20R) cannot be located, the head is likely a new Cat® cylinder head.
Reman Crankshafts
If the crankshaft is a true Reman crankshaft, the new part number will be ground off, and the Reman part number will be stamped on one of the last
two counterweights on either end of the crankshaft.
Illustration 9 g03876244
This example shows:
(-) Crankshaft Part Number: 351-5780 (not a serviced part number)
(-) Date Code: 345 14 (345th day of 2014)
(-) .635MM (journals are 0.635mm undersized)
(-) Refer to Table 1
Many Reman crankshaft part numbers are "Upgrade to New" (UTN), so will not have a Reman part number.
4 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 10 g03876249
This example shows:
(-) Part Number: 10R-5414
(-) Date Code: 13025 (25th day of 2013)
(-) Source Facility Code: no letter code indicated it was remanufactured in the United States
(-) Refer to Table 1
Illustration 11 g03876253
This example shows:
(-) Part Number: 10R-0484
(-) Date Code: 171 12 (171st day of 2012)
(-) Source Facility Code: E (Shrewsbury, England)
(-) Refer to Table 1
5 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 12 g03876257
This example shows 3408E/3412E HEUI pump product markings:
(-) Part Number: 10R-1001
(-) Serial Number: 34793
Illustration 13 g03876270
This example shows C7/C9 HEUI pump product markings:
(-) Part Number: 10R-8899
(-) Date Code: 14204 (204th day of 2014)
(-) Serial Number: 80784
(-) Refer to Table 1
6 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 14 g03876275
This example shows C-175 CR fuel pump product markings:
(-) Part Number: 20R-2423
(-) Serial Number: 3RP0583
Illustration 15 g03876287
This example shows:
(-) Part Number: 10R-4030
(-) Date Code: NAUN (0510 = May 2010)
(-) Refer to Table 1
(-) Refer to Table 2
Illustration 16 g03876288
This example shows:
(-) Part Number: 0R-9200
(-) Date Code: 16813 (168th day of 2013)
(-) Source Facility Code: EB (Shanghai, China)
(-) Refer to Table 1
(-) Refer to Table 2
Connecting rods retain the original markings that match the cap to the rod. This marking is unique for each different rod.
The supplier code, date code, and sequence number are stamped on the side of a 3500 connecting rod.
Reman Pistons
Pistons and piston crowns may be remanufactured or new. The part number will be printed onto the top surface of the crown and piston if
remanufactured. Piston skirts can be new or remanufactured by polishing. If no Reman part is present on a piston or crown, the part is a genuine
new Cat® piston.
7 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Reman fuel injectors are remanufactured in Shanghai, China, and Nuevo Laredo, Mexico. Injectors remanufactured in Shanghai will include the
"EB" source code.
DIFN
Direct injection fuel nozzles formerly had a "NUMERALKOD" date code.
Illustration 17 g03876299
This example shows:
(-) Part Number: 0R-3418
(-) Date Code: NKNO (0708 = July 2008)
(-) Refer to Table 1
(-) Refer to Table 2
Illustration 18 g03876302
This example shows:
(-) Part Number: 0R-3536
(-) Serial Number: 7462106
(-) Refer to Table 1
MUI
Mechanical unit injectors are labeled with the part number and a serial number.
8 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 19 g03876307
This example shows a 3600 MUI:
(-) Part Number: 20R-4179
(-) Serial Number: 04081501 (build date: April 8, 2015 - first injector built that day)
(-) Refer to Table 1
Illustration 20 g03876315
This example shows a 3500 MUI:
(-) Part Number: 0R-3051
(-) Serial Number: 787480
(-) Refer to Table 1
Illustration 21 g03876318
This example shows a 3100 MUI:
(-) Part Number: 0R-8461
(-) Serial Number: 1431861
(-) Refer to Table 1
9 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 22 g03876321
This example shows a 3100 MUI manufactured in the Shanghai facility:
(-) Part Number: 0R-8684
(-) Serial Number: EB20031640
(-) Refer to Table 1
HEUI
Reman hydraulic electronic unit injectors will have the Reman part number, serial number, and a validation code. C7/C9 HEUI injectors are
packaged with a CD that contains the trim file for this injector and others built around the same time. The trim file is also available in SIS Web.
There are several generations of HEUI fuel systems. Some examples of fuel injector marking and trim practices are shown below.
Illustration 23 g03876345
This example shows a C7/C9 HEUI injector:
(-) Part Number: 10R-4761
(-) Serial Number: B3102766504C
(-) Validation Code: 6648
(-) Refer to Table 1
10 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 24 g03878745
This example shows a 3408E/3412E HEUI injector:
(-) Part Number: 10R-1266
(-) Serial Number: 240201
(-) "NP" = Non-prime
(-) Refer to Table 1
EUI
Electronic unit injectors are labeled with the part number, serial number, and trim code.
There are several generations of EUI fuel systems. Some examples of fuel injector marking and trim practices are shown below.
Illustration 25 g03876348
This example shows:
(-) Part Number: 10R-0957
(-) Serial Number: 1240224
(-) Trim Code: 3877
(-) Refer to Table 1
Some injectors have the information on the tappet of the injector, not the solenoid.
11 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 26 g03876353
This example shows:
(-) Part Number: 20R-1269
(-) Serial Code: 1407920
(-) Trim Code: 6710
(-) Refer to Table 1
Common Rail
Common rail fuel injectors have a trim file on a CD or available on SIS Web.
Illustration 27 g03876368
This example shows:
(-) Part Number: 10R-7672
(-) Serial Number: S2L105732277
(-) Validation Code: 2000
(-) Refer to Table 1
Illustration 28 g03876372
This example shows an injector manufactured in the Shanghai facility:
(-) Serial Number: EB4009926899
(-) Validation Code: 1971
(-) Part Number: 10R-7675
(-) Refer to Table 1
12 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 29 g03876389
This example shows:
(-) Part Number: 0R-6968
(-) Serial Number: OLC090012
Illustration 30 g03876393
This example shows:
(-) Part Number: 10R-1011
(-) Model Number: S3BSL128
(-) Serial Number: 03A221100141
Illustration 31 g03876397
This example shows:
(-) Part Number: 20R-0608
(-) Serial Number: HT440447T011
13 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 32 g03876409
This example shows:
(-) Part Number: 0R-5519
(-) Change Level: 03
(-) Date Code: NKNUUM (Day "NK" = 07, Month "NU" = 01, Year "UM" = 12, January 7, 2012)
(-) 3 = third shift
(-) Refer to Table 1
(-) Refer to Table 2
Reman ECMs
Reman ECMs are stamped with the part number, part version number, and a serial number that includes a manufacture date code.
Illustration 33 g03876411
This example shows:
(-) Part Number: 10R-1824
(-) Change Level: 07
(-) Serial Number/Date Code: 1194L035CG (day = 119, year = 4 (2004, 2014), location of remanufacture = L, unit number = 035, suffix code = CG (matches internal serial number
suffix code))
Note: The serial number will be different from internal serial read by Cat ET, which is the original serial number; the internal serial number never
changes
Illustration 34 g03876418
This example shows:
(-) Part Number: 0R-3668
(-) Date Code: NKUR (July 2014)
(-) Voltage: 12V
(-) Refer to Table 2
The following identification plates use a month code to indicate manufacture month. Refer to Table 3 to decipher the month code.
From 2007 to 2013 Reman starters and alternators were fitted with a plate like the one below:
14 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 35 g03876428
This example shows:
(-) Part Number: 10R-0395
(-) Reference New Part Number: 207-1517
(-) Date Code: Y 12 G 04 (July 4th 2012)
(-) Voltage: 24V
Since 2013 Reman starters and alternators have been fitted with a plate like the one below:
Illustration 36 g03876435
This example shows:
(-) Part Number: 10R-9815
(-) Reference New Part Number: 338-3545
(-) Date Code: 15 G 17 (July 15th, 2015)
(-) Time Code: 103659 (10:36am and 59 seconds) (Note: the first two digits indicate the hour 0-24)
(-) Voltage: 24V
Month Code
January A
February B
March C
April D
May E
June F
July G
August H
September J
October K
November L
December M
Table 3
15 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
This serial number provides no manufacture date information, but the corresponding manufacture date may be acquired by submitting a Parts
Technical service request using the Product Support Customer Relationship Management system (PSCRM,
https://productsupport.crm.dynamics.com). When submitting a PSCRM service request, provide photographs of the product serial number plate.
The serial number, Reman part number, and remanufacturing date code are provided both on the serial tag on the unit as well as the shrink wrap
the unit is packaged in at the factory.
Illustration 37 g03876454
This example shows:
(-) Part Number: 0R-4007
(-) Serial Number: 10221558A
(-) Date Code UUUE (1113 = November 2013)
(1) Production order number
(2) Model number
(3) Date
(-) Refer to Table 2
16 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 38 g03876472
(1) Production order number stamped on wheel
(2) Production order number stamped on spindle
(3) Metal serial tag
(4) Production order number on serial tag
(-) Refer to Table 2
Reman Spindles
Reman spindles are marked on the top surface (i.e. reaction hub end of spindle).
17 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 39 g03876474
Reaction Hub End of Spindle
This example shows:
(-) Part Number: 0R-9041
(-) Production Order Number: 183874
(-) Date Code: UUUU (1111 = November 2011)
(-) Refer to Table 2
Reman Drivetrain Components that Require Serial Number for Machine Software
Certain machine configurations require a drivetrain component serial number to identify that the correct drivetrain software is being installed.
Illustration 40 g06507060
(5) Serial number prefix
(6) R
(7) Reman work order number
Reman drivetrain components that have this requirement will now have the appropriate new equivalent drivetrain component serial number prefix
(5) followed by an R (6) to identify the component as a Reman and the last four digits of the Reman Work Order Number (7). When updating the
machine configuration or drivetrain software, use the complete serial number provided on the plate
Illustration 41 g03876492
This example shows:
(-) Job Number: 310690-5
(-) Part Number: 0R-3119
(-) Production Date Code: 5097
Cylinders produced prior to 2008 will include a "C" before the job number. Also, the job number will not include a dash.
18 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 42 g03876498
This example shows:
(-) Job Number: C133480
(-) Part Number: 0R-7372
(-) Production Date Code: 4498
Illustration 43 g03876499
This example shows:
(-) Part Number: 0R-8899
(-) Job Number: 294522-1
Rods produced prior to 2008 will include an "R" before the job number. Also, the job number will not include a dash.
19 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 44 g03876501
This example shows:
(-) Part Number: 10R-0528
(-) Serial Number: 127562-2
Illustration 45 g03876502
This example shows:
(-) Part Number: 10R-8711
(-) Serial Number: 1211602
(-) Manufacture Date: 01-16-12 (January 16th, 2012)
Illustration 46 g03876503
This example shows:
(-) Part Number: 0R-0890
(-) Serial Number: 40416390
(-) Manufacture Date: 12-12 (December 2012)
20 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 47 g03876505
This example shows:
(-) Part Number: 0R-1031
(-) Serial Number: CF004754GP
(-) Manufacture Date: 15-057 (57th day of 2015)
Illustration 48 g03876511
This example shows:
(-) Part Number: 10R-2462
(-) Serial Number: CF000831PP
Illustration 49 g03876713
This example shows:
(-) Part Number: 0R-8340
(-) Serial Number: 1J1307H
(-) Production Control Number: 5002032
Note: All Bendix air compressors built on the same day will have the same serial number.
21 de 22 12/07/2022, 2:10 p. m.
SIS 2.0 https://sis2.cat.com/?_ga=2.62550635.651928820.1657580171-993456897.1588451595#/print-prev...
Illustration 50 g03876717
This example shows:
(-) Part Number: 0R-8171
(-) Serial Number: 19214 (192nd day of 2014)
PPW-9D4E933E
2022/07/12
21:09:38-07:00
i06258272
© 2022 Caterpillar Inc.
Caterpillar:
Confidential Green
22 de 22 12/07/2022, 2:10 p. m.