Professional Documents
Culture Documents
The alignment of the solenoid valve 1 depends on the position of the coding
pin 5. The position of the coding pin 5 determines the direction of movement at
Translation of the original instructions the drive.
© 2020 all rights reserved to Festo SE & Co. KG
1 Applicable Documents
2 Safety
2.1 Safety instructions
– Before working on the product, switch off the power supply and secure it
against being switched on again.
Fig. 4
2.2 Intended use 1. Position coding pin 5 on the thread [D]/[E] in accordance with the desired
The solenoid valve is intended for mounting on a drive with a NAMUR plug pattern direction of movement.
in accordance with VDI/VDE 3845 Sheet 1:2010-09. 2. Screw coding pin 5 into the thread [D]/[E] to the stop.
3 Additional information
– Accessories è www.festo.com/catalogue.
4 Scope of delivery
1 Solenoid valve (1x)
single solenoid;
5/2 or 3/2
2 Screw (2x)
3 O-ring (1x)
4 Sheet metal seal (1x)
5 Coding pin (1x)
Fig. 5
Fig. 1
• Place coding recess [F] on the coding pin 5.
5 Preassembly
Fig. 6
• Tighten screws 2. Tightening torque: 3.5 Nm ± 20%.
7 Circuit diagrams
VSNC-F...-M52-...-F...
Single solenoid 5/2 Single solenoid 3/2