Professional Documents
Culture Documents
Timken Part Number X30208M - Y30208M, Tapered Roller Bearings - TS (Tapered Single) Metric
Timken Part Number X30208M - Y30208M, Tapered Roller Bearings - TS (Tapered Single) Metric
Timken Part Number X30208M - Y30208M, Tapered Roller Bearings - TS (Tapered Single)
Metric
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts:
the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Speci cations | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Speci cations
Series 30208
0.43 Kg
Bearing Weight
0.940 lb
Dimensions
11/7/2019 | Page 2 of 4
40 mm
d - Bore
1.5748 in
80 mm
D - Cup Outer Diameter
3.1496 in
18 mm
B - Cone Width
0.7087 in
16 mm
C - Cup Width
0.6299 in
19.75 mm
T - Bearing Width
0.7776 in
Aa - Cage-Cone Backface 0 mm
Clearance 0 in
-3 mm
a - Effective Center Location3
-0.12 in
11/7/2019 | Page 3 of 4
74700 N
C0 - Static Radial Rating
16800 lbf
Factors
K - Factor7 1.56
instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
16.000
3.6
18.000
80.000
40.000
71.0
47.5
49.5
75.0
-3.0
METRIC UNITS
ISO Factor - e 0.37
ISO Factor - Y 1.6 X30208M - Y30208M
Bearing Weight 0.43 kg TS BEARING ASSEMBLY
Number of Rollers Per Row 17
Effective Center Location -3 mm
K Factor 1.56
Dynamic Radial Rating - C90 18400 N
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 11800 N
NORTH CANTON, OHIO USA Static Radial Rating - C0 74700 N
Dynamic Radial Rating - C1 70900 N
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY