Professional Documents
Culture Documents
電路學教科書(Textbook):
Charles K. Alexander and Matthew N. O. Sadiku, Fundamentals of
Electric Circuits, McGraw-Hill, 7th Edition, 2021.
請將上述兩個部分,掃描合併成一個PDF檔案(file size小於10MB),檔名請使用
「HW11_自己的學號」(例如: HW11_109511260),於作業繳交截止日期前,上
傳到指定的E3數位平台繳交。
HW#11-1
Homework #11 Part 2 (50%):
*本次作業正負號、單位都要對,電壓統一使用 Volt (V)、電流統一使用 Ampere (A)、電阻統
一使用 Ohm (Ω)、功率統一使用 Watt (W) 、時間統一使用 Second (s) 、角頻率統一使用
red/s 來回答,頻率統一使用(Hz),即使答案是 phasor 的形式,作答時也請連同單位一起
寫,例如 complex power 的單位是 VA 、real power 的單位是 Watt (W) 、reactive power 的
單位是 VAR ,違者不予計分。
Problem 11-1:
Find the Norton equivalent for the circuit in Fig. 11-1 at terminals a - b. Please
represent the Norton equivalent both current source and impedance in polar
form.
20Ω j20Ω
a
Fig. 11-1
<Sol.>: (請將答案之重要推導與計算過程敘述於下。若空白處不夠書寫,請自行增加空白頁
作答。)
HW#11-2
Problem 11-2:
Find currents I1, I2, and I3 in polar form in the circuit of Fig. 11-2.
j2Ω j12Ω
10Ω 30Ω 5Ω
Fig. 11-2
<Sol.>: (請將答案之重要推導與計算過程敘述於下。若空白處不夠書寫,請自行增加空白頁
作答。)
HW#11-3
Problem 11-3:
Obtain V1 and V2 in the ideal transformer circuit in Fig. 11-3.
1:4
+ +
2 0° A 10Ω v1 v2 12Ω 1 0° A
- -
Fig. 11-3
<Sol.>: (請將答案之重要推導與計算過程敘述於下。若空白處不夠書寫,請自行增加空白頁
作答。)
HW#11-4
Problem 11-4:
Find current io(t) in the ideal transformer circuit shown in Fig. 11-4.
i0 1/20F
2Ω
1:3
12 cos(2t) V 6Ω
Fig. 11-4
<Sol.>: (請將答案之重要推導與計算過程敘述於下。若空白處不夠書寫,請自行增加空白頁
作答。)
HW#11-5
Problem 11-5:
Refer to the network in Fig. 11-5. Find n for the maximum power supplied to the
200-Ω load and determine the power in the 200-Ω load if n = 10.
3Ω
1:n
4 0° A 5Ω 200Ω
Fig. 11-5
HW#11-6
Problem 11-6:
An ideal transformer is used to match an amplifier with an 8-Ω load as shown in
Fig. 11-6, the Thevenin equivalent of the amplifier is: VTh = 10 V, ZTh = 128-Ω.
First of all, find the required turns ratio n for maximum energy power transfer,
and then determine the primary and secondary currents I1 and I2 and voltages
V1 and V2.
1:n
Amplifier
+ +
circuit I1 v1 v2 I2 8Ω
- -
Fig. 11-6
<Ans.>: n = ____________.
I1 = ___________. I2 = ___________.
V1 = ___________. V2 = ___________.
<Sol.>: (請將答案之重要推導與計算過程敘述於下。若空白處不夠書寫,請自行增加空白頁
作答。)
HW#11-7
Problem 11-7:
For the ideal transformer circuit of Fig. 11-7 below, find the rms value of I1, I2,
V1, V2, and Vo in polar form. Finally, determine the complex power S source
supplied by the source in polar form.
I1 I2
1:2
2Ω -j6Ω
+ + +
60 90° V(rms) v1 v2 j3Ω vo
- - 12Ω
-
Fig. 11-7
<Ans.>: I1 = ___________. I2 = ___________.
HW#11-8
Problem 11-8:
For the circuit in Fig. 11-8, find I1, I2, and Vo.
I1 I2
2Ω 1:5 14Ω 3:4
+
24 0° V vo 60Ω 160Ω
-
Fig. 11-8
HW#11-9
Problem 11-9:
In the ideal autotransformer of Fig. 11-9, calculate I1, I2, and Io in polar form. In
addition, find the average power P average delivered to the load.
I2
2-j6Ω I1 load
200 turns
10+j40Ω
80 turns
20 30° V
Io
Fig. 11-9
<Ans.>: I1 = ___________. I2 = ___________.
HW#11-10
Problem 11-10:
In the ideal autotransformer circuit in Fig. 11-10, show that
𝑵𝟏 𝟐
𝒁𝒊𝒏 = (𝟏 + ) 𝒁𝑳
𝑵𝟐
N1 turns
N2 turns
ZL
Zin
Fig. 11-10
HW#11-11