Professional Documents
Culture Documents
top
ros
Id
A hydrophilic,
expandable,
chloroprene rubber,
waterstop
• Joints between different types of materials, e.g. PVC or Idrostop MY can swell more than 300% by volume of
steel pipes running under poured concrete in its original size and its swelling properties are
swimming pools, sewage-treatment tanks, reservoirs, unaffected by repeated wet and dry cycles. Unlike
and hydraulic projects. clay-based products it will not expand until break-up.
• Cold joints (temporary shrinkage joints) created during Idrostop MY has been tested to withstand 70 metre
pouring to reduce the risk of cracking in long or head of water pressure.
monolithic structures.
Idrostop MY is non-toxic, making it suitable to be used
• Construction joints where conventional waterstops
in water structures containing water for human
cannot be installed easily and securely because of
consumption and marine life.
congested reinforcements.
• Construction joints in tunnels, dams and hydraulic Idrostop MY is available in 2 sizes, 20x5 mm (Idrostop
projects including reservoirs for portable water. 20-05 MY) and 20x10 mm (Idrostop 20-10 MY).
o MY
is heavily contaminated with acids or solvents. Clean the
Idr
surface thoroughly and consult Mapei Technical Service.
APPLICATION PROCEDURE
Preparing the substrate
The surface of the concrete must be sound, clean and free of dirt,
dust, oils and any contaminant which may affect adhesion.
Remove cement laitance and any deposits that may have been
left during concrete pouring.
Installation
Idrostop MY can be applied on concrete, metal, PVC and natural
stone with Idrostop Mastic, a ready- to-use, single-component,
solvent-free, MS polymer-based, adhesive sealant.
In the event of heavy rain before the concrete pour takes place,
Idrostop MY needs to be checked for pre-expansion.
Pre-expanded sections need to be removed and replaced with
new sections of Idrostop MY.
CONSUMPTION
Approximately 250 ml of Idrostop Mastic per 10 lineal metres of In line joint. Butt
Idrostop MY. jointing of two
pieces of Idrostop
MY
TECHNICAL DATA (typical values)
PRODUCT IDENTITY
Colour: black
APPLICATION DATA
For application on
vertical surfaces it is
recommended to
install the waterstop
in lengths of about
1m
stop STORAGE
o MY
Idrostop MY can be stored for 12 months in
Idr
a dry place at temperatures between +10oC
and +40oC.
WARNING
Although the technical details and
Y1611
recommendations contained in this product
data sheet correspond to the best of our
knowledge and experience, all the above
information must, in every case, be taken as
merely indicative and subject to confirmation
after long-term practical application; for this
reason, anyone who intends to use the
product must ensure beforehand that it is
suitable for the envisaged application. In
every case, the user alone is fully responsible
for any consequences deriving from the use
of the product.
Pieces longer than 1m can be installed on Please refer to the current version of the
vertical surfaces by fixing the top of the Technical Data Sheet, available from our
pieces with a nail or pin and then extruding website www.mapei.com
Thickness of the Idrostop Mastic directly onto the
concrete to protect underlying substrate.
All r elevant refe r ences
Idrostop MY
for the p roduct a r e available
PACKAGING upon r equest and from
435-7-2013