Professional Documents
Culture Documents
Página 1 de 3
Cerrar SIS
Pantalla anterior
i01785873
This diagnostic code is recorded when the system voltage is greater than 32.5 DCV. The solenoids
may be damaged if the voltage remains high for an extended period of time.
B. Access Service Mode. Place CID 0168 FMI 03 on hold. See Testing and Adjusting, "Using
Caterpillar Monitoring System to Determine Diagnostic Codes".
Expected Result:
Results:
• YES - The diagnostic code indicator shows "SERV CODE". Proceed to Test Step 3.
https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 23/03/2021
D6N XL, D/S, LGP TRACK-TYPE TRACTOR AKM00001-UP (MACHINE) POWE... Página 2 de 3
• NO - The diagnostic code indicator does not show "SERV CODE". Proceed to Test Step 2.
Expected Result:
Results:
Repair: The charging system is charging at an excessive voltage. Check the charging system.
See System Operation, SENR2947, "Starting and Charging System".
Stop.
Stop.
Expected Result:
Results:
Repair: Exit this procedure and perform the diagnostic code procedure again. If the problem
persists, the ECM may have failed. Prior to replacing the ECM, always contact your
dealership's Technical Communicator for possible consultation with Caterpillar. This
consultation may greatly reduce repair time. If the cause of the diagnostic code is not found,
replace the power train ECM. See the Testing and Adjusting, "Electronic Control Module
(ECM) - Replace".
Stop.
https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 23/03/2021
D6N XL, D/S, LGP TRACK-TYPE TRACTOR AKM00001-UP (MACHINE) POWE... Página 3 de 3
Repair: The charging system is charging at an excessive voltage. Check the charging system.
See System Operation, SENR2947, "Starting and Charging System".
Stop.
Copyright 1993 - 2021 Caterpillar Inc. Tue Mar 23 14:01:44 CST 2021
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 23/03/2021