Professional Documents
Culture Documents
Sintavia Sample Powder Report
Sintavia Sample Powder Report
QF-824.01 REV B
Owner: Metallurgist 7/27/2016
PROPRIETARY NOTICE
This document contains confidential and propriety information to Sintavia, LLC. The information contained in this document shall not be copied
nor shared, disclosed to others, or used for any purposes beyond the specific purpose for which this document was intended without the
express written permission of Sintavia, LLC.
Page 1 of 5
6545 Nova Drive, Suite 207
Davie, Florida 33317
+1 954.474.7800 / F +1 954.693.8505
QF-824.01 REV B
Owner: Metallurgist 7/27/2016
PROPRIETARY NOTICE
This document contains confidential and propriety information to Sintavia, LLC. The information contained in this document shall not be copied
nor shared, disclosed to others, or used for any purposes beyond the specific purpose for which this document was intended without the
express written permission of Sintavia, LLC.
Page 2 of 5
6545 Nova Drive, Suite 207
Davie, Florida 33317
+1 954.474.7800 / F +1 954.693.8505
Powder Particles Are Overall Spherical But Contains Many Irregular Shaped Particles.
Scanning Electron Microscopy & Energy Dispersive Spectrum - Semi Quantitative Chemical Analysis
SEM / EDS Chemical Analysis for Sintavia 17-4PH, 1000X
QF-824.01 REV B
Owner: Metallurgist 7/27/2016
PROPRIETARY NOTICE
This document contains confidential and propriety information to Sintavia, LLC. The information contained in this document shall not be copied
nor shared, disclosed to others, or used for any purposes beyond the specific purpose for which this document was intended without the
express written permission of Sintavia, LLC.
Page 3 of 5
6545 Nova Drive, Suite 207
Davie, Florida 33317
+1 954.474.7800 / F +1 954.693.8505
QF-824.01 REV B
Owner: Metallurgist 7/27/2016
PROPRIETARY NOTICE
This document contains confidential and propriety information to Sintavia, LLC. The information contained in this document shall not be copied
nor shared, disclosed to others, or used for any purposes beyond the specific purpose for which this document was intended without the
express written permission of Sintavia, LLC.
Page 4 of 5
6545 Nova Drive, Suite 207
Davie, Florida 33317
+1 954.474.7800 / F +1 954.693.8505
The Hall Meter Flow Test (Method 1) was performed on the 17-4PH, Batch 2016000496, per
ASTM B213 the powder exhibited a Positive Flow characteristic of 20.76 seconds per 50 grams
units during the test.
The Apparent Density using a Hall Flow Meter per ASTM B212, obtained from calculations on the
powder was of 3.42 g/cm3 with a constant volume of 25 cm3.
The Tapped Density per ASTM B527, obtained from calculations was 4.44 g/cm3 with a mass
powder of 100g and a volume of 25 cm3.
The room where the experiments were conducted exhibits the following characteristics:
Temperature is 22° Centigrade and Relative Humidity is at 34%.
QF-824.01 REV B
Owner: Metallurgist 7/27/2016
PROPRIETARY NOTICE
This document contains confidential and propriety information to Sintavia, LLC. The information contained in this document shall not be copied
nor shared, disclosed to others, or used for any purposes beyond the specific purpose for which this document was intended without the
express written permission of Sintavia, LLC.
Page 5 of 5