Professional Documents
Culture Documents
Coupling Devices
COUPLING CAPACITORS
Analyzing the discharge activity requires the permanent
BUILT-IN VOLTAGE
BUILT-IN QUADRU-
installation of coupling devices. Preferably, such coupling
NOM. VOLTAGE
BUILT-IN RF CT
CAPACITANCE
devices are capacitive couplers terminated by a power
separation filter.
DIVIDER
Power Diagnostix standard coupling
POLE
TYPE
capacitors are mounted on sturdy
cast aluminum enclosures and can be
CC7B 440 pF 7 kV l l
used for on-line and off-line measurements
on rotating machines as well as for a variety CC14B 220 pF 14 kV l l
of smaller test setups. A wider range of CC20B 145 pF 21 kV l l
coupling capacitors and capacitor assemblies CC25B 1 nF 25 kV l l
completed by quadrupoles and preamplifiers is CC25B/V 1 nF 25 kV l l
available on request. The CC25C/V 1 nF 25 kV l l l
table at the right-hand
CC35B/V 145 pF 35 kV l l
side lists some standard
CC50B/V 1 nF 50 kV l l
models of coupling
c a p a c i t o r s CC50C/V 1 nF 50 kV l l l
provided by Power CC100B/V 1 nF 100 kV l l
Diagnostix, along CC150B/V 1 nF 150 kV l l
with their built-in CC200B/V 0.5 nF 200 kV l l
circuits, if present. CC300B/V 0.5 nF 300 kV l l
TRANSF.
COUPLER TERMINATION BOXES TYPE RATIO
PRIMARY BANDWIDTH BANDWIDTH
WINDOW AT -3 DB AT -6 DB
AT 50 Ω
A coupler termination box is necessary for providing the
CT1 1:10 15 mm 0.5 – 80 MHz 0.3 – 100 MHz
protective ground for the coupler’s BNC signal cable.
CT33 1:10 33 mm 0.7 – 75 MHz 0.4 – 77 MHz
TYPE CHANNEL SPARK GAP IN OUT CT50/10 1:10 50x10 mm 2 – 90 MHz 1.7 – 93 MHz
CTB1A 3x 350 V BNC BNC CT60R 1:10 60 mm 2 – 25 MHz 1.2 – 40 MHz
CTB1C 3x 350 V TNC BNC CT100(R) 1:10 100 mm 2 – 25 MHz 1.2 – 40 MHz
CTB2A 4x 350 V BNC BNC CT125R 1:10 125 mm 2 – 25 MHz 1.2 – 40 MHz
CTB2C 4x 350 V TNC BNC CT150R 1:10 150 mm 2 – 25 MHz 1.2 – 40 MHz