Professional Documents
Culture Documents
SATIP-H-002-08 Pipe Internal Coating and Installation-1
SATIP-H-002-08 Pipe Internal Coating and Installation-1
Verification and Visual Inspection of pipe, S. Aramco shall inspect the first batch of delivered paints
2.1 fittings & coating materials (powder and SAIC-H-2060 H1 W2 and abrasives, after which random inspection will be
paints) conducted.
Storage and Handling of Paints and
2.2
Abrasives
SAIC-H-2025 H1 S
3.0 INSTALLATION
Page 1 of 3
SAUDI ARAMCO 9000-ENG (10/03) 726-400 (ID/PID)
SATIP No. APPROVED DATE DISCIPLINE:
SAUDI ARAMCO TYPICAL INSPECTION PLAN
INTERNAL COATING OF PIPE SPOOLS AND INTERNAL FBE
SATIP-H-002-08 11-Apr-04 MECHANICAL-Coating
COATING OF FIELD GIRTH WELDS
PROJECT TITLE: WBS/BI/JO/NO. CONTRACTOR/SUBCONTRACTOR
4.0 PRE-COMMISSIONING
Inspection of assembly/installation of
4.1
Internally coated pipe (re-instatement)
SATR-H-2008 H1 W1
GENERAL NOTES
The first three incidents of each Inspection or testing activity listed require 100 % participation by Saudi Aramco Site Inspection Personnel. After this period, Saudi Aramco Inspection may adjust
1
the levels of Saudi Aramco participation based upon the Contractor’s performance.
2 Surveillance: QA/QC organization to monitor work in progress without notice from Construction Organization
Witness: QA/QC organization shall be notified of the timing of Inspection or test in advance. However, the inspection or test shall be performed as scheduled if the QA/QC organization
3
representative is not present.
Hold: QA/QC organization shall be notified of the timing of inspection or test in advance. Inspection or test shall not be carried out without the QA/QC organization representative in
4
attendance.
5 If the Main Contractor delegates the assigned responsibility to the Subcontractor, then the Main Contractor will have the same degree of responsibility as assigned to Saudi Aramco.
LEGEND
W1 100% Witness Inspection/Test H2 Sample Hold Point for QC Inspection or Test RH1 100% Review and Approval of Documents
W2 Sample Witness Inspection/Test R1 100% Review of Documents RH2 Sample Review and Approval of Documents
H1 100% Hold Point for QC Inspection or Test R2 sample Review of Documents S Surveillance
Page 2 of 3
SAUDI ARAMCO 9000-ENG (10/03) 726-400 (ID/PID)
SATIP No. APPROVED DATE DISCIPLINE:
SAUDI ARAMCO TYPICAL INSPECTION PLAN
INTERNAL COATING OF PIPE SPOOLS AND INTERNAL FBE
SATIP-H-002-08 11-Apr-04 MECHANICAL-Coating
COATING OF FIELD GIRTH WELDS
PROJECT TITLE: WBS/BI/JO/NO. CONTRACTOR/SUBCONTRACTOR
Page 3 of 3