This document provides specifications for a low-voltage circuit breaker for a motor control center. It includes details such as the project name and location, applicable codes and standards, site conditions like ambient temperature, system parameters like voltage and frequency, enclosure type, bus bracing requirements, accessories, documentation needs, and additional specifications for items like the ground bus. The document ensures the correct breaker will be provided to meet the project needs and codes based on the site and system specifications outlined.
This document provides specifications for a low-voltage circuit breaker for a motor control center. It includes details such as the project name and location, applicable codes and standards, site conditions like ambient temperature, system parameters like voltage and frequency, enclosure type, bus bracing requirements, accessories, documentation needs, and additional specifications for items like the ground bus. The document ensures the correct breaker will be provided to meet the project needs and codes based on the site and system specifications outlined.
This document provides specifications for a low-voltage circuit breaker for a motor control center. It includes details such as the project name and location, applicable codes and standards, site conditions like ambient temperature, system parameters like voltage and frequency, enclosure type, bus bracing requirements, accessories, documentation needs, and additional specifications for items like the ground bus. The document ensures the correct breaker will be provided to meet the project needs and codes based on the site and system specifications outlined.
PIP Data Sheet for Low-Voltage Circuit Breaker ELSMC13D
ELSMC13 Motor Control Centers PAGE 1
Client Engineering Org. Spec. No.
Project Title Location Date
Project Location Contract Number Equip. No.
Proj. No. Specifier Name Tele. No.
P. O. No.
Refer to Specification No. ELSMC13 for General Requirements
Applicable State and Local Codes:
Data Provided by: Buyer Bidder with Proposal Seller after Order
Site Conditions: Unit Options:
Altitude ft. Seismic Zone NEMA Wiring: Ambient Temperature: Max. C Min. C Class 1 - Type B Other System Parameters: Control Power Transformers: V Phase Hertz Wire 480/120 VAC Other Available Fault Current Individual CPTs Other Incoming Line Power: Extra VA Line Enters: Overload Relays: Top Bottom Electro-Mechanical Electronic (Solid State) Left Right Automatic Reset Ambient Compensated Top Hat 12" Line Connection Class 20 Class 10 Lugs Only Main Circuit Breaker A Heaters Sized per Buyer’s Attachments Without Heaters Lugs: Motor Protection Devices: Lugs by Seller Copper Aluminum Thermal-Magnetic Magnetic Only Qty Wire(s) per Phase Wire Size AWG Adjustment Range: MCC Enclosure: Per NEC Table Other NEMA: Accessories: 1 (Standard) 3R Drip-Proof Automatic Shutters 1A Gasket 12 Dust-Tight Provisions for Two-Hole Compression Lugs Units > 100 A Outdoor Enclosure (See PIP ELSSG12) Unit Load Cable Lugs by Seller Front Only Back-to-Back Space for Future Unit Internal Devices 15" Deep 20" Deep Deep Surge Suppressors on Contactor Coils Standard Finish Other Unit Devices Custom Finish Expansion Cover Plate(s) Required Left Right Door-Mounted Devices Horizontal Wireway Size 6" Min. Other Space Heater: Nameplates: Required High-Temp Cutout Heater CB 1" x 2-1/2" (Std) Other Thermostat Control Test PB and Ammeter White Tag/Black Letters Other Main Power Bus: 3/16" Letters Other Bus Bracing: Engraved Plastic Other 42,000 A 65,000 A Door-Mounted Device Nameplate Located Inside Door 50,000 A 100,000 A Documentation: Bus Material (Horizontal and Vertical): Schematic Diagrams: Copper Aluminum Manufacturer’s Standard Bus Joint Plating: By Buyer Manufacturer Standard Electronic Document Format .DXF Other Tin-Plated Silver-Plated Other Manufacturer to Provide: Horizontal Power Bus: Reproducible Plus 600 A 800 A 1000 A 1200 A Number of Copies of All Documentation Plus 1600 A 2000 A 2500 A Copies of the Operating Manuals Vertical Power Bus: Additional Documentation Requirements: 300 A 600 A 450 A 800A Ground Bus: Size: Manufacturer Std. 1/4" x 1" Other Vertical Copper Ground Bus Other Horizontal Copper Ground Bus Top Bottom