This document is a data sheet for liquid-immersed power transformers ranging from 500 kVA to 10,000 kVA and up to 34.5 kV HV winding. It includes specifications for ratings, system parameters and windings, impedance, bushing location and connection method, insulating liquid and preservation system, accessories, inspection and tests, documentation, efficiency considerations, and other notes and requirements. Site conditions, special requirements, and applicable codes are also noted for the project.
This document is a data sheet for liquid-immersed power transformers ranging from 500 kVA to 10,000 kVA and up to 34.5 kV HV winding. It includes specifications for ratings, system parameters and windings, impedance, bushing location and connection method, insulating liquid and preservation system, accessories, inspection and tests, documentation, efficiency considerations, and other notes and requirements. Site conditions, special requirements, and applicable codes are also noted for the project.
This document is a data sheet for liquid-immersed power transformers ranging from 500 kVA to 10,000 kVA and up to 34.5 kV HV winding. It includes specifications for ratings, system parameters and windings, impedance, bushing location and connection method, insulating liquid and preservation system, accessories, inspection and tests, documentation, efficiency considerations, and other notes and requirements. Site conditions, special requirements, and applicable codes are also noted for the project.
Data Sheet for Design and Manufacture of Liquid-Immersed Power ELSTR01D
Transformers of 500 kVA - 10,000 kVA up to 34.5 kV HV Winding PAGE 1
Client Engineering Org. Spec. No.
Project Title Location Date
Project Location Contract Number Equip. No.
Proj. No. Specifier Name Tele. No.
P. O. No.
Refer to Specification No. ELSTR01 for General Requirements
Applicable State and Local Codes:
Data Provided by: Buyer Bidder with Proposal Seller after Order
Site Conditions: Accessories:
Altitude Ft. Seismic Zone Current Transformers (as per Section 5.7.2) Ambient Temperature: Max. C Min. C High Voltage Quantity Ratio
Low Voltage Quantity Ratio
Rating: Neutral Quantity Ratio OA Rating kVA (as per Section 5.1.2) Dissolved Gas Monitor (as per Section 5.7.4) Other Sudden Pressure Relay (as per Section 5.7.5) System Parameters and Windings: Alarm/Auxiliary Relay Control Voltage Volts High Voltage kV Phase Hertz Insulating Liquid and Preservation System (as per Section 6): Delta Wye Mineral Oil (Type II per ASTM D3487-88) (as per Section 6.1.2) Solidly Grounded Resistance Grounded Ungrounded Other (as per Section 6..1.3) Copper Other Sealed Tank System with Purge Nozzle and Shutoff Valve Low Voltage kV Phase Hertz Inert Gas Pressure System (as per Section 6.2.2) Delta Wye Special Requirements: Solidly Grounded Resistance Grounded Ungrounded Transformer Will Supply Single Large Motor as Follows: Copper Other HP Voltage Full Load Amps Impedance: Standard (as per Section 5.1.11) Other Locked Rotor Amps Acceleration Time Seconds Bushing Location and Connection Method: Transformer will supply non-linear loads: kVA/kW High Voltage Line Top Mounted Air Terminal Chamber Other Flanged Throat Other Inspection and Tests (per Section 7): High Voltage Neutral Top Mounted Air Terminal Chamber Test as listed in this Practice Witnessed Not Witnessed Flanged Throat Other Temp Rise Lightning Impulse Switching Impulse Low Voltage Line Top Mounted Air Terminal Chamber Front of Wave Radio Influence Voltage Flanged Throat Other Audible Sound Level Mechanical Pressure Test Low Voltage Neutral Top Mounted Air Terminal Chamber Other Flanged Throat Other Documentation: Space Heaters in Air Terminal Chambers: Electronic Document Format .dxf Other Thermostats Required Not Required Seller to provide: Cooling Fans: No. of Copies of All Documentation Plus Voltage Volts Remote Contact (as per Section 5.5.11) No. of Copies of the Operating Manuals Fan Failure Alarm Required (as per Section 5.7.3) Efficiency Considerations (per Section 5.2): Other Seller Shall Optimize Efficiency Based on $ to Offset Alarm and Monitoring: One (1) KW of Losses at 75% Load Other % Load Voltage Volts Notes and Other Requirements: