Professional Documents
Culture Documents
Bahagian A
Section A
[60 markah]
[60 marks]
Rajah 1
Diagram 1
………………………………………………………………………………………….
[1 markah]
[1 mark]
[1 markah]
[1 mark]
(c) Apabila suis dihidupkan, apakah yang akan berlaku kepada mentol? Berikan
sebab.
When the switch is ON, what will happen to the bulb? Give the reason.
………………………………………………………………………………………….
………………………………………………………………………………………….
[2 markah]
[2 mark]
MPP3 2021 4
SULIT
Rajah 4
Diagram 4
_______________________________________________________________
[1 markah / mark]
(b) Diod berfungsi sebagai rektifier.
The function of diode is as a rectifier
_________________________________________________________
[1 markah / mark]
(ii) Beri dua jenis rektifikasi.
Give two types of rectification.
_________________________________________________________
_________________________________________________________
[2 markah / marks]
5
4531/2 © Hak Cipta MPSM Negeri Perlis [Lihat halaman sebelah
SULIT
SULIT
(c) Berdasarkan jawapan anda di b (ii), lakarkan paparan output bagi kedua-dua jenis
rektifikasi yang dipaparkan di skrin O.S.K.
Based on your answer in b (ii), sketch both output display in C.R.O screen for both type
of rectification displayed.
VR
t/s
VR
t/s
[ 2 markah/ marks]
6
4531/2 © Hak Cipta MPSM Negeri Perlis [Lihat halaman sebelah
SULIT
SULIT 15 4531/2
6 Rajah 6.1 dan Rajah 6.2 menunjukkan dua litar transistor sebagai suis automatik Kegunaan
yang serupa yang berada di tempat yang gelap dan dalam cahaya terang masing- Pemeriksa
masing.
Diagram 6.1 and Diagram 6.2 show two identical circuits of a transistor as an
automatic switch in dark place and in bright light respectively.
Rajah 6.1
Diagram 6.1
Rajah 6.2
Diagram 6.2
…………………………………………………………………… 6(b)(ii)
[1 markah]
[1 mark] 1
(iii) arus tapak, IB
the base current, IB
…………………………………………………………………… 6(b)(iii)
[1 markah]
[1 mark] 1
(c) Berdasarkan jawapan dalam 6(b), nyatakan hubungan antara
Based on the answers in 6(b), state the relationship between
(i) voltan tapak dengan arus tapak.
the base voltage with the base current.
…………………………………………………………………… 6(c)(i)
[1 markah]
[1 mark] 1
(ii) arus tapak dengan arus pengumpul.
base current with the collector current.
…………………………………………………………………… 6(c)(ii)
[1 markah]
[1 mark] 1
(iii) arus pengumpul dengan nyalaan mentol.
collector current with the lighting of the bulb.
…………………………………………………………………… 6(c)(iii)
[1 markah]
[1 mark] 1
(d) Jika mentol dalam Rajah 6.2 diganti dengan lampu sorot berlabel “240V,
100W”, dapatkah lampu sorot itu menyala? Berikan sebab anda.
If the bulb in Diagram 6.2 is replaced with a spotlight labelled “240V,
100 W”, can the spotlight be lighted up? Give your reason.
……………………………………………………………………………
…………………………………………………………………………… 6(d)
[2 markah]
[2 marks] 2
Jumlah
Rajah 10.1
Diagram 10.1
(a) (i) Namakan litar P dalam litar transistor dalam Rajah 10.1.
Name circuit P in the transistor circuit in Diagram 10.1
[1 markah]
[1 mark]
(ii) Apabila suis ditutup, kecerahan mentol X dan mentol Y berbeza. Terangkan
bagaimana keadaan ini berlaku.
When the switch is closed, brightness of bulb X and bulb Y is different. Explain
how this situation occur.
[4 markah]
[4 marks]
(b) Jika bacaan mikroammeter dan milliammeter dalam Rajah 10.1 adalah masing-masing
40 μA and 64 mA, tentukan faktor penggandaan arus dalam litar transistor tersebut.
If the reading of microammeter and milliammeter in Diagram 10.1 are 40 μA and 64 mA
respectively, determine the amplification factor of the current in the transistor circuit.
[2 markah]
[2 marks]
(c) Transistor dalam Rajah 10.1 diganti dengan transistor pnp. Lukis satu litar transistor yang
baharu yang boleh berfungsi secara normal.
The transistor in Diagram 10.1 is replaced with a pnp transistor. Draw a new transistor
circuit that can work normally.
[3 markah]
[3 marks]
25
(d) Rajah 10.2 menunjukkan empat litar elektronik W, X, Y dan Z dengan spesifikasi yang
berbeza. Anda dikehendaki menentukan litar elektronik yang paling sesuai untuk menyalakan
ketiga-tiga lampu jalan 100 W, 240 V secara automatik dengan kecerahan normal apabila
keadaan persekitaran gelap.
Diagram 10.2 shows four electronic circuits W, X, Y and Z with different specifications. You
are required to determine the most suitable electronic circuit to light up three street lights,
100 W, 240 V automatically with normal brightness when the surrounding is dark.
Tentukan litar elektronik yang paling sesuai dipilih dan berikan sebab-sebab bagi pilihan anda.
Determine the most suitable electronic circuit to be chosen and give your reasons.
[10 markah]
[10 marks]
26
Litar W
Circuit W
Litar X
Circuit X
Litar Y
Circuit Y
Litar Z
Circuit Z
Rajah 10.2
Diagram 10.2
27