Professional Documents
Culture Documents
Iat-2te Ay 22-23
Iat-2te Ay 22-23
6. Define gauge factor. 3 3 L1 2 Explain the types of resistance wire strain gauge, with a
15.(A) 3 3 L3 13
neat diagram.
7. State the working principle of Piezo resistive sensor. 3 3 L1 2 (OR)
Explain in detail with a neat diagram piezo resistive
8. Mention few applications of thermistors. 3 3 L1 2 15.(B) 3 3 L3 13
sensor.
9. Give any two materials used in humidity sensors. 3 3 L1 2 PART - C (1 x 15= 15)
Q. No. Question Unit Co# BT M
10. Name the different type of pressure sensors. 3 3 L1 2
Drive the response of the under-damped second order
16.(A) 2 2 L3 15
PART - B (5x13=65) transducer for step input.
Q. No. Question Unit Co# BT M (OR)
Derive an expression for the frequency response of a Explain the working of Hot wire anemometer and its
16.(B) 3 3 L3 15
11. (A) second order system subjected to sinusoidal input 2 2 L2 13 application for the measurement of flow rate of fluids
r(t)=A sin wt. Note:
(OR) M – Marks CO# - Course Outcome BT - Blooms Taxonomy
A measuring system has an exponential response to L1 – Remember L2 – Understanding L3 - Apply
step input. The time constant of the system is 2 L4 – Analyze L5 – Evaluate L6 – Create
11. (B) 2 2 L2 13
seconds. What is the time required for reaching (1) 50
percent and (2) 80 percent of final steady state.
Derive the equation for Time response of a second
12.(A) 2 2 L2 13
order system when subjected to Unit Impulse Input. Prepared by
(OR) Dr. V.Saravanan / ECE HOD / ECE
T. Devika / ECE Dr.N.Santhiyakumari