Professional Documents
Culture Documents
• Reduce stumps
• Move debris to the dinge
• Realignment of lines for better
uniformity of plantations
• management
• Sort debris between lines
• Recover land planting area
•
Model 1000 V-Shears
First, the two middle need to be placed close and then long screws
go in the center frame, short screw go on the front joint, then weld.
V-Shear Assembly:
Protect left/right halves
First, the two middle need to be placed close and then long screws
go in the center frame, short screw go on the front joint, then weld.
V-Shear Assembly:
Welding procedures
PRE-HEAT 200⁰ C
BEFORE WELDING
PRE-HEAT 200⁰ C
BEFORE WELDING
V-Shear Maintenance:
Hard surface welding
• HARD SURFACE INCREASES THE LIFE OF
SCISSOR TEETH
• ALLOWS THE FRONT EDGE TO SHARPEN
•
V-Shear Maintenance:
Hard surface welding
• HARD SURFACE INCREASES THE LIFE OF
SCISSOR TEETH
• ALLOWS THE FRONT EDGE TO SHARPEN
•
V-Shear Operations: