Professional Documents
Culture Documents
AND STAND
Meloor, Chalakudy
1
DEPARTMENT OF MECHANICAL ENGINEERING
CERTIFICATE
This is to certify that the mini project has been done by DENIL DAVIS
Diploma in Mechanical Engineering under the State Board of Technical Education Kerala
2
ACKNOWLEDGEMENT
We would like to take this opportunity to express our gratitude towards allthe people
who have helped in various ways, for successful completion of them in project report. This
work is the outcome of the guidance provided by the experienced and dedicated personals of
gratitude to Mr. SREEJITH.P. S Sir for the expert advises and valuable suggestions at each
andevery stage of them in project. we would like to convey our gratitude to our principal Mr..
LAZAR C.C Sir forgiving this opportunity. We deeply obliged toMr. ARUN N.R Sir, Head
of the Department of Mechanical Engineering for giving us the constant source of inspiration
and suggestion for preparing this mini project report personally correcting our work and
providing encouragementthroughout the mini project. All the above we thank God almighty
for providingus the opportunity to present our mini project. Thanking our parents and guardian
for their encouragement and support and especially thank all my classmates whoare always
there to support.
3
ABSTRACT
light tool like screw driver and hammer. This stand helps to held tool box in a position .It is
year project will allocate the one semester to complete a project. This project also
required the
4
CONTENTS
INTRODUCTION..................................................................... 6
MATERIALS............................................................................ 7
DIMENSIONS......................................................................... 8
CONSTRUCTION.................................................................... 9
ADVANTAGES...................................................................... 12
SPECIFICATIONS.................................................................. 13
CONSLUSION....................................................................... 14
5
INTRODUCTION
Toolbox stand is a very important -thing to hold tool box and tools. In
order to make the toolbox stand, the project will design and analyze a toolboxstand model
in marketthat can be used for make a new concept of toolbox.
The stand must be easy to carry anywhere and store more tools. We
can found lots of tool box that available in workshop or home but usually this toolbox are
fixed.
This project is to fabricate the stand that can store hold box easily
with low cost. The structure of sand must be high strength and light. Its designis quite simple
6
MATERIALS
Steel square PIPE is the material used for making and construction of the
toolbox stand. raw steel is converted into a more workable form. Next, the pipe is formed on
a continuous or semicontinuous production line. Finally, the pipe is cut and modified to meet
the customer's needs.
SS(Stainless Steel), MS(Mild Steel) & GI(Galvanised Iron) Works. MS
Pipes: Made from mild steel they can easily be welded and formed in various shapes and
sizes for pipelining and tubing purposes.
What is the process of making pipes?
Pipes are first and foremost produced through an extrusion process.
The raw material is feeded into the extruder via a hopper and a gravimetric or volumetric
control system. Inside the extruder barrel the material is heated up to the melting point
around 200°C by electricity and the friction in the screw system.
7
DIMENSIONS
8
CONSTRUCTION
Joint the pipe pieces in proper way that it looks like a stand.
9
Tool Box
10
11
ADVANTAGES
Organize
Prevent damages
While carrying the tools from one place to other, the chances of
getting damage will be higher. In order to avoid this damage and to maintain the
quality of the tools at its best, one can make use of the tool box stand. The
stand are available in many differentsizes and hence one can choose the one
which can accommodate all their toolbox without any constraint. Thus, by using
these boxes, the durability of the tool can also be increased to agreater extent.
Reliability
In order to carry the tools from one place to other, one can
make use thetool box. Since they are very compact in size, they will accommodate
very small space. Hence, they can be stored easily in cars, lorry or in any other
vehicle. Since they are handy, the users will not have any kind of difficulties in
using them. They can take this box anywhere in order to fix the repair without
any constraint. Since these boxes will not require any special maintenance,
they are quite reliable to handle.
12
SPECIFICATIONS
Total weight 3 KG
Total height 80 cm
Durability 5 years
13
CONCLUSIONS
The tool box stand is widely used around the globe to store or
tokeep our toolbox properly and aligned without making damages to our tools.
The tool box is set into a stand that is properly welded to therequired size of
the toolbox.
14
15