Professional Documents
Culture Documents
Holistic Academy-Test-BM & BC Q-Paper
Holistic Academy-Test-BM & BC Q-Paper
1. The bricks which are ground moulded and are burnt in clamps are
2. Match List – I with List – II and select the correct answer using the codes given below the lists:
Codes:
A B C D
a) 1 3 2 4
b) 1 4 2 3
c) 1 3 4 2
d) 4 3 1 2
3. In the process of brick manufacturing, the pug mill is used in which of the following operation?
10. As per SP 62 (S&T) – Handbook on Building Construction Practices (by BIS), the bricks
manufactured in ____________ (employing commonly known methods for moulding and burning)
are having the highest compressive strength compared to the bricks manufactured in other
mentioned states.
11. Which of the following statements are correct considering the effect of the properties of coarse
aggregate used in concrete?
(i) The quantity of water required for a given workability is reduced if the maximum size of
aggregates is smaller.
(ii) Strength of aggregates is not a governing criterion in lower strength concrete.
(iii) Compared to rounded aggregates, the quantity of water required for a given workability is higher
if the aggregates are angular.
a) (i) & (ii) b) (ii) & (iii) c) (i) & (iii) d) (i), (ii) & (iii)
13. In ultrasonic pulse velocity method, the pulse velocity is found to be 4 km/sec, the concrete
quality grading is
14. Before testing setting time of cement one should test for
16. Which one of the following is the correct range of fineness modulus of medium sand usable in
preparing cement mortar?
a) 40 b) 30 c) 20 d) 10
18. during brick manufacturing process, correct sequence for preparation of clay is
1. Digging
2. Cleaning
3. Weathering
4. Unsoiling
5. Tempering
6. Blending
20. Which IS code is used for classification of timber for seasoning purposes?
22. The yield of concrete per bag of cement for a concrete mix proportion of 1: 1.5:3 (with adopting
2/3 as the coefficient) is
23. If one intends to obtain the best workability of concrete, the preferred shape of aggregate is
26. The window which projects outside of a room of a building for admitting more light and air, is
known as
28. The maximum permissible deflection of a timber beam supporting a roof is,
30. In panelled doors, the maximum area of a single panel of timber should not come be more
than______________
a) 0.5 𝑚2 b) 1 𝑚2 c) 1.5 𝑚2 d) 2 𝑚2
31. Which of the followings is used to make sure that no moisture leaks in those areas of a roof that
are particularly vulnerable to penetration?
32. The mortars used for masonry construction are classified based on strength in IS 2250 and IS
1905 according to their designations 𝐿1 ,𝐿2 ,𝐻1 ,𝐻2 , 𝑀1 , 𝑀2 . The correct sequence of increasing order
of their strength is
33. Assertion (A): While painting on flush doors of plywood, putty-filling is done after prime coat.
Reason (R): This reduces the quantity of paint and effort involved in the regular coats of the paints.
7490053737
a) Both A and R are true and R is the correct explanation of A.
b) Both A and R are true but R is not a correct explanation of A.
c) A is true but R is false.
d) A is false but R is true.
34. Which of the following type of stairs are a variation of L shaped stairs?
a) Winder b) Spiral c) Half turn d) Switch back
35. During the construction of earthquake-resistant buildings, it should be kept in mind that those
solid concrete blocks should be used which have crushing strength not lesser than
38. In a cavity wall, both leaves of which are load bearing, the effective thickness is taken as
41. The term used to mean the external views as seen from certain rooms of the building is
44. By using filler slab technique, which of the following can be achieved?
45. Shear cracks between the main wall and cross wall can be corrected using
46. Which of the following IS code in used for fire safety of buildings
47. Which of the following material of window has life span of 50 years?
49. Which type of scaffolding is used when the proper hard ground is not available for the standards
to rest.
50. _________ are the cofferdams which can be lifted, floated and placed in another position as
soon as its purpose is served.