Professional Documents
Culture Documents
PW3 RV Art.No.: 69.25.xx* PF3 S Art.No.: 69.28.xx* PF3 P Art.Nr.: 69.27.xx* PP4 RS E Art.No.: 69.10.xx* PP4 RS Art.No.: 69.12.xx* PP3 RS Art.No.: 69.20.xx*
Water pressure sensor for level measure- Gas and liquid pressure sensor connected Gas and liquid pressure sensor with pres- Pore water pressure sensor with ring filter Pore water pressure sensor with ring filter Pore water pressure sensor with small ring
ment with mechanical solid body and to bulkhead plates with hydraulic union sure gauge union and vent screw for sensor made of sintered metal with threaded con- made of sintered metal and maximum filter and maximum external diameter of
geomembrane filter to protect against pre-chamber nection for press-in sleeve external diameter of 40 mm 30 mm
suspended particles
Diameter Ø/Dimension: 30x225 mm Diameter Ø/Dimension: 30x230 mm Diameter Ø/Dimension: 30x200 mm Diameter Ø/Dimension:*: 40x330 mm Diameter Ø/Dimension: 40x230 mm Diameter Ø/Dimension: 30x225 mm
Weight: 670 g Weight: 640 g Weight: 650 g Weight*: 1745 g Weight: 920 g Weight: 680 g
Filter type: Geomembrane External connection: EO SV6S External connection: 1/2 Zoll Filter type: Sintered metal Filter type: Sintered metal Filter type: Sintered metal
Filter area: 28 cm2 Internal connection bore: 3 mm Internal connection bore: 3 mm Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571
Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571 Filter area: 57 cm2 Filter area: 57 cm2 Filter area: 28 cm2
Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68
* (with press-in sleeve)
PW4 RV Art.No.: 69.15.xx* PW3 SV Art.No.: 69.26.xx* PW22 SW Art.No.: 69.51.xx* PP3 SS Art.No.: 69.22.xx* PP3 SK Art.No.: 69.23.xx* PP22 SS Art.No.: 69.50.xx*
Water pressure sensor for level measure- Water pressure sensor for level measure- Water level sensor for well and level loggers Pore water pressure sensor with end face Pore water pressure sensor with ceramic Lightweight pore water pressure sensor with
ment with mechanical solid body and ge- ment with mechanical pre-filter and repla- with mechanical pre-filter made of plastic filter made of sintered metal end face filter for cohesive soils diameter of 22 mm and fully encapsulated
omembrane filter with maximum filter area ceable geomembrane filter for suspended with limited service life
particles
Diameter Ø/Dimension: 40x230 mm Diameter Ø/Dimension: 30x160 mm Diameter Ø/Dimension: 22x170 mm Diameter Ø/Dimension: 30x160 mm Diameter Ø/Dimension: 30x160 mm Diameter Ø/Dimension: 22x160 mm
Weight: 880 g Weight: 450 g Weight: 240 g Weight: 450 g Weight: 450 g Weight: 250 g
Filter type: Geomembrane Filter type: Geomembrane Filter type: Plastic Filter type: Sintered metal Filter type: Ceramic Filter type: Sintered metal
Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571
Filter area: 57 cm2 Filter area: 5,5 cm2 Filter area: 2 cm2 Filter area: 5,5 cm2 Filter area: 5,5 cm2 Filter area: 2 cm2
Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68
Particle size protection: Up to 1.0 mm *Px22 available only up to ≤ 3,5 bar
PW3 RV Art.No.: 69.25.xx* PF3 S Art.No.: 69.28.xx* PF3 P Art.Nr.: 69.27.xx* PP4 RS E Art.No.: 69.10.xx* PP4 RS Art.No.: 69.12.xx* PP3 RS Art.No.: 69.20.xx*
Water pressure sensor for level measure- Gas and liquid pressure sensor connected Gas and liquid pressure sensor with pres- Pore water pressure sensor with ring filter Pore water pressure sensor with ring filter Pore water pressure sensor with small ring
ment with mechanical solid body and to bulkhead plates with hydraulic union sure gauge union and vent screw for sensor made of sintered metal with threaded con- made of sintered metal and maximum filter and maximum external diameter of
geomembrane filter to protect against pre-chamber nection for press-in sleeve external diameter of 40 mm 30 mm
suspended particles
Diameter Ø/Dimension: 30x225 mm Diameter Ø/Dimension: 30x230 mm Diameter Ø/Dimension: 30x200 mm Diameter Ø/Dimension:*: 40x330 mm Diameter Ø/Dimension: 40x230 mm Diameter Ø/Dimension: 30x225 mm
Weight: 670 g Weight: 640 g Weight: 650 g Weight*: 1745 g Weight: 920 g Weight: 680 g
Filter type: Geomembrane External connection: EO SV6S External connection: 1/2 Zoll Filter type: Sintered metal Filter type: Sintered metal Filter type: Sintered metal
Filter area: 28 cm2 Internal connection bore: 3 mm Internal connection bore: 3 mm Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571
Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571 Filter area: 57 cm2 Filter area: 57 cm2 Filter area: 28 cm2
Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68
* (with press-in sleeve)
PW4 RV Art.No.: 69.15.xx* PW3 SV Art.No.: 69.26.xx* PW22 SW Art.No.: 69.51.xx* PP3 SS Art.No.: 69.22.xx* PP3 SK Art.No.: 69.23.xx* PP22 SS Art.No.: 69.50.xx*
Water pressure sensor for level measure- Water pressure sensor for level measure- Water level sensor for well and level loggers Pore water pressure sensor with end face Pore water pressure sensor with ceramic Lightweight pore water pressure sensor with
ment with mechanical solid body and ge- ment with mechanical pre-filter and repla- with mechanical pre-filter made of plastic filter made of sintered metal end face filter for cohesive soils diameter of 22 mm and fully encapsulated
omembrane filter with maximum filter area ceable geomembrane filter for suspended with limited service life
particles
Diameter Ø/Dimension: 40x230 mm Diameter Ø/Dimension: 30x160 mm Diameter Ø/Dimension: 22x1170 mm Diameter Ø/Dimension: 30x160 mm Diameter Ø/Dimension: 30x160 mm Diameter Ø/Dimension: 22x160 mm
Weight: 880 g Weight: 450 g Weight: 240 g Weight: 450 g Weight: 450 g Weight: 250 g
Filter type: Geomembrane Filter type: Geomembrane Filter type: Plastic Filter type: Sintered metal Filter type: Ceramic Filter type: Sintered metal
Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571 Material: V4A 1.4571
Filter area: 57 cm2 Filter area: 5,5 cm2 Filter area: 2 cm2 Filter area: 5,5 cm2 Filter area: 5,5 cm2 Filter area: 2 cm2
Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68 Protection class: IP 68
Particle size protection: Up to 1.0 mm
Supply Constant current 1 mA Supply 15 to 30 V Overload protection of measuring range 50 % Environmental protection: Gel pad to
Optional supply 4 mA or 10 VDC Output signal 4 – 20 mA Linearity incl. hysteresis ± 0.5 % f. s. protect the membrane against aggressive
Output signal 0 – 250 mV Overload protection (1 – 50 bar) 50 % f. s. Linearity incl. hyster. (opt.) ± 0.1 % f. s. chemicals and extreme pH values
Overload protection (1 – 50 bar) 50 % f. s. Linearity incl. hysteresis < 0.5 % f. s. Resolution ± 0.02 %*1 f. s.
Linearity incl. hysteresis < 0.5 % f. s. Linearity incl. hysteresis (opt.) < 0.1 % f. s. Thermal zero offset < 0.02 %/ °C*1 Climate tested: If required, we can prepare
Linearity incl. hysteresis (opt.) < 0.1 % f. s. Operating temperature +5 to +60 °C a temperature test for your batch or indivi-
Thermal zero offset 0.025 mV/ °C Storage temperature (dry) -15 to +100 °C SENSOR SPECIFICATIONS dual sensor to provide a precise tempera-
Operating temperature +5 to +80 °C Temperature coefficient < 0,01 %/ °C f. s. Temperature range -20 to +80 °C ture quotient for your evaluation.
Storage temperature (dry) -40 to +100 °C Load impedance (Us-9 V) : 20 mA Current consumption Impulse excitation
Long-term drift, temperature-dependent Initialization time after switch-on 6 seconds Operating frequency 2 kHz - 3,3 kHz * PW4 RF only: With additional M36x1.5
(at 0 °C to 50 °C), typ. 0.25 mV With optional AD 590 temperature sensor, Supply, impulse triggering 60 V union for press-in sleeve 1. 2. 3. 4. 5.
Max. cable lenghts 500 - 1000 m* output signal 1 μA/K Optional ex-protection*2 EEx ib IIB T4
Max. cable length 1000 - 2000 m* EEx ib IIB BTI All of our sensors are calibrated in defined Overview of cable types
Max. cable length 2500 m environmental parameters. This calibration
*Dependent on the number of sensors and cabel length
1. PE
result is included with the actual device in 2. PUD
*1 Deviation during operation at high temperatures on request
*2 The cable characteristics need to be taken into account for
the form of a comprehensive calibration 3. PE without intersheath
ex-versions sheet. More extensive calibrations can be 4. PVCA
arranged at any time. 5. High-temperature cable SIHD
AU AI VW
PRESSURE AND MEASURING RANGES PRESSURE AND MEASURING RANGES PRESSURE AND MEASURING RANGES
Further designs on request.
Measurement device and Data
0 - 0.1, 0 - 0.2, 0 - 0.5 , 0 - 1 , 0 - 2, 0 - 5 , 0 - 0.1, 0 - 0.2, 0 - 0.5 , 0 - 1 , 0 - 2, 0 - 5 , -0,5 bis +0,7/ +1,7/ +3,5*/ +7/ +10/ logging
0 - 10, 0 - 20, 0 - 50, 0 - 100, 0 - 200 and 0 - 10, 0 - 20, 0 - 50, 0 - 100, 0 - 200 and +20/ +30/ +50/ +75/ +100/ +200/ +350
0 - 400 bar 0 - 400 bar und +500 / +750 bar/ negative pressures Handheld measuring device HMG
standard up to -0.5 bar Handheld measuring device for
*Px22 available up ≤ 3,5 bar vibrating wire transducer SMC
Data logger DL
Measurement system MCC
Supply Constant current 1 mA Supply 15 to 30 V Overload protection of measuring range 50 % Environmental protection: Gel pad to
Optional supply 4 mA or 10 VDC Output signal 4 – 20 mA Linearity incl. hysteresis ± 0.5 % f. s. protect the membrane against aggressive
Output signal 0 – 250 mV Overload protection (1 – 50 bar) 50 % f. s. Linearity incl. hyster. (opt.) ± 0.1 % f. s. chemicals and extreme pH values
Overload protection (1 – 50 bar) 50 % f. s. Linearity incl. hysteresis < 0.5 % f. s. Resolution ± 0.02 %*1 f. s.
Linearity incl. hysteresis < 0.5 % f. s. Linearity incl. hysteresis (opt.) < 0.1 % f. s. Thermal zero offset < 0.02 %/ °C*1 Climate tested: If required, we can prepare
Linearity incl. hysteresis (opt.) < 0.1 % f. s. Operating temperature +5 to +60 °C a temperature test for your batch or indivi-
Thermal zero offset 0.025 mV/ °C Storage temperature (dry) -15 to +100 °C SENSOR SPECIFICATIONS dual sensor to provide a precise tempera-
Operating temperature +5 to +80 °C Temperature coefficient < 0,01 %/ °C f. s. Temperature range -20 to +80 °C ture quotient for your evaluation.
Storage temperature (dry) -40 to +100 °C Load impedance (Us-9 V) : 20 mA Current consumption Impulse excitation
Long-term drift, temperature-dependent Initialization time after switch-on 6 seconds Operating frequency 2 kHz - 3,3 kHz * PW4 RF only: With additional M36x1.5
(at 0 °C to 50 °C), typ. 0.25 mV With optional AD 590 temperature sensor, Supply, impulse triggering 60 V union for press-in sleeve 1. 2. 3. 4. 5.
Max. cable lenghts 500 - 1000 m* output signal 1 μA/K Optional ex-protection*2 EEx ib IIB T4
Max. cable length 1000 - 2000 m* EEx ib IIB BTI All of our sensors are calibrated in defined Overview of cable types
Max. cable length 2500 m environmental parameters. This calibration
*Dependent on the number of sensors and cabel length
1. PE
result is included with the actual device in 2. PUD
*1 Deviation during operation at high temperatures on request
*2 The cable characteristics need to be taken into account for
the form of a comprehensive calibration 3. PE without intersheath
ex-versions sheet. More extensive calibrations can be 4. PVCA
arranged at any time. 5. High-temperature cable SIHD
AU AI VW
PRESSURE AND MEASURING RANGES PRESSURE AND MEASURING RANGES PRESSURE AND MEASURING RANGES
Further designs on request.
Measurement device and Data
0 - 0.1, 0 - 0.2, 0 - 0.5 , 0 - 1 , 0 - 2, 0 - 5 , 0 - 0.1, 0 - 0.2, 0 - 0.5 , 0 - 1 , 0 - 2, 0 - 5 , -0,5 bis +0,7/ +1,7/ +3,5*/ +7/ +10/ logging
0 - 10, 0 - 20, 0 - 50, 0 - 100, 0 - 200 and 0 - 10, 0 - 20, 0 - 50, 0 - 100, 0 - 200 and +20/ +30/ +50/ +75/ +100/ +200/ +350
0 - 400 bar 0 - 400 bar und +500 / +750 bar/ negative pressures Handheld measuring device HMG
standard up to -0.5 bar Handheld measuring device for
*Px22 available up ≤ 3,5 bar vibrating wire transducer SMC
Data logger DL
Measurement system MCC