Professional Documents
Culture Documents
GAURAV KADAM
A/G1, Om Shree Ram C.H.S, Sector 7, Plot no.26, Shree nagar, Wagle estate, Thane (West)–
400604, Maharashtra,India
Contact No. : +91 – 8450902129, 9082531462
Email ID: gauravkadam8@gmail.com , gaurav_198129@rediffmail.com
Petrochemical/ Chemical / Oil & Gas Projects - Planning, , Site Construction Management
– Execution & close out, Quality Management
Career Objective:
Have an overall Experience of 18+ years in the field of Instrumentation & Control
Engineering. I am looking for a good position in the field of instrumentation and safety
integrated process automation system in a prestigious company where my skills and
capabilities can be put into efficient use. I possess effective organizational skills and the
ability to utilize a team and develop the final output.
Educational Qualification:
DIPLOMA : Diploma In Instrumentation Engg. From M.S.B.T.E – Under
University of Mumbai, 2000
TECHNICAL COURSE :
Undergone Implant training in Nagman Instruments & Electronics Pvt. Ltd., 2005
Attended seminar for Pepperl + Fuchs – Field Bus
Attended seminars for various make DCS, PLC, Water Treatment Plant, Fire
Fighting System, In-Tools etc.
All in-house vendors training for process instrumentation and plant safety training
Completed the ISO 9001-2008 course & certified as an Internal Auditor
Completed various level of Group ethics training programs
Professional Experience
JOB PROFILE
Design Review of EPC and Vendors Overall detailed Engineering and Standard
Specification with respect to Instrument system activities to ensure compliance with
the scope of work.
Review for various I&C system like DCS Logics, SAT procedure, Commissioning
procedure, System Description, Control Philosophy, Data Sheets, Location & Installation
Drawings, Hook up, P&ID, PFD Drawings etc.
Working as an INSTRUMENTATION & CONTROL ENGINEER in detailed erection,
construction, pre-commissioning and commissioning of instrumentation activities in
Power Plant, Oil & Gas, and petro chemicals.
Familiar with standards ISA, IEEE, ASTM, NAMUR, ASMI, ANSI, NEMA, IEC, NFPA etc.
Supervision for the laying of Control / Instrumentation / Fiber-optic / Other network
cables in the Cable trays, trenches, underground & along with proper termination
including with conduit sealing / proper Lugs
Actively Conducting the Factory Acceptance Test & Site Acceptance Test for I&C Related
Packages as OE role
Actively lead the Site construction supervision activities like erection, installation,
Testing, Quality Assurance, Loop Checking, Witnessing of FAT / SAT, Troubleshooting,
Pre-commissioning, and Post commissioning of I&C Components and Plant Main
Control system (DCS / PLC / SIS) in thermal / CCGT power plant and as well as oil & gas
projects
Testing of DCS, PLC, UPS (Earth test, Cable Loop & Continuity Test, Megger Test, Logic
Test, Control Network Test, Redundancy Test etc.)
Prepare and maintain commission records of site observations, testing processes and
checklists.
Efficient troubleshooting and optimization of the Field instruments & Control Systems.
Validation of Control System Logics like OCLS and CLCS in the DCS / PLC / SIS.
Modification of CLCS / OLCS logics as per process condition / site condition based.
Maintaining of all kinds of reports like ITR approved reports, Instrument calibration
Reports, FAT & SAT reports for PCS / SIS and PLC Panel, TG Panel, Pre-commissioning
test report, Final commissioning report
Coach and train equipment engineers associated with instrument as well as control
deliverables.
Responsible for completion activities related to commissioning package equipment and
handover to operation
Following up punch works in the field and punch list documentation and clearance.
Actively involved to close of all kinds of Checklist, Inspection Test Reports (ITR) and
Punch Lists
Ensure that drawings/documents are marked up with changes identified during
Commissioning and that as-built documentation is updated according to Site
Instructions
Preparation / Review of final Site As-Built Drawing
Actively participated in the performance Test and warranty test
Preparation of List for any left-out items after commissioning of plant
Providing recommendations to the Owner for the Final Take of the Plant (TOP)
Actively lead on kinds of meetings like Monthly progress meeting, Site Progress
meeting, technical issues meetings, contract variation meetings, Design Review
meetings, Commercial negotiation meetings etc.
Adept at implementing quality measures / standards & applied quality management
tools & practices such as for effective with zero accidents
Always maintain the QA/QC records of the inward material calibration report and
issuing the I&C instruments / Equipments after completion of calibration for further
Site erection works with safety precaution methods.
Involves in the Schedule development, maintenance & Monitoring activities. Final sign
off for all QA / QC checklists.
Insisting of QHSE Rules implementation at site
An effective communicator with excellent relationship, management skills and strong
analytical, problem solving and organizational abilities.
Test Reports handling for the various BOP Package, I&C Equipments and Control
system including with the Pre / Final Commissioning Activities at site
Followed the Design change notes (DCN) & Field Change Notes (FCN) from the EPC
Consortium / contractors during site erection / installation / commissioning activities
from the EPC Consortium partners at site
Personal Profile:
Declaration
I promise that the details furnished above by me are the latest and true to the best of my
knowledge.
Place : India
Date : 16/12/2022
(GAURAV KADAM)