Professional Documents
Culture Documents
Error Message and Processing Method错误信息及处理方式
Error Message and Processing Method错误信息及处理方式
Error Code
错误信息 普通版本 处理方式
The pc driver version is wrong Use the correct driver
1 PCVERSION_ERROR
PC驱动版本错误 使用对应正确的驱动
The printable balance is less than a certain square Recharge
2 SURPLUS_SQUARE_LIMIT number
进行充值
可打印余额小于一定平方数
Zero balance Recharge/upgrade
3 A_ZERO_BALANCE
余额为零 进行充值或者升级
Origin sensor error Check the sensor wiring or replace the sensor
4 ZERO_SENSOR_ERR
原点感应器错误 检查感应器接线或更换感应器
UI parameterization error The main board and the carrige board do not
10 Ul_PARA_INIT_ERR
UuI参数化错误 match
The printed waveform is empty 主板与小车板不匹配
reset
11 WAVE_TABLE_EMPTR
打印波形为空 恢复出厂设置
Carriage reverse error Adjust the motor direction code
12 CARRIER_RE_ERR
小车反向错误 调整电机方向码
UI parameterized beta
22
uI参数化测试版
Does not support time limit This version only supports square numbers
23 TIMES_LIMIT_NO_SUPPORT
不支持时间限制 该版本只支持平方数
The timing chip is abnormal or not plugged in
Limit read errors
24 TIMES_LIMIT_READ_ERR properly
限制读取错误
记时芯片异常或者未插好
Restriction is not plugged in Registration has expired
25 TIMES_LIMIT_USER_END
限制已用完 注册已过期