Professional Documents
Culture Documents
Final Exam OISP
Final Exam OISP
Fig. 1a Fig. 1b
Problem 2 ((2 points)::
(L.O.7.2) The bent shaft is fixed in the wall at A as shown in Fig. 2.. If a force F=50N
(L.O.7.1), (L.O.7. =50N and = 45°
is applied at B, determine
ermine the stress components at points D and E..
Problem 3 (2 points)::
(L.O.8.2), (L.O.8.3) Determine the maximum force P that can be applied to the handle so that the steel
control rod AB does not buckle. The rod has an outer diameter D of 40mm and inner diameter d of
3. Take allow 160 MPa ; =70
30mm. It is pin connected at its ends as shown in Fig. 3. =0,81;
=0,81;
=80 =0,75.
=0,75.
Fig. 2 Fig. 3
--- The End
nd ---
TRƯ
TRƯỜNG
NG ĐH BÁCH KHOA TP.HCM PHỤ LỤ
ỤC ĐỀ THI
KHOA K
KỸ THU
THUẬT
T XÂY DỰNG
D Chuẩn
Chu Đầu
u Ra Môn H
Họọc Tương Ứng
Ứ Với Đềề Thi
Bộ môn: S
Sức Bền - Kết
K Cấu Môn thi: Sức
S cBBền Vật Liệệu
MSMH: CI2001 Nhóm: CC02
Ngày thi: 15/01/2019 Thời lượ
ợng:
ng: 90 phút
Trưởng
ng B
Bộ môn duyệt
duy Giảng
ng viên ra đề
đề
TS. Nguy
Nguyễn Hồng
ng Ân TS. Nguyễn
Nguy n Thái Bình