Professional Documents
Culture Documents
DUAYEN MS-954
2 Component Spray System DUAYEN YAPI KİMYA VE
MAKİNE SAN VE TİC A.Ş.
PRODUCT DESCRIPTION
It is two-component, elastomeric system, 100% solvent free and 100%solid material. The product is aromatic and very
resistant against weathering aging (excluding optical discoloration that occurs by time). Applied product gives seamless
monolith surface. It takes the shape of the surface without form joints or grouts.
APPLICABLE FIELDS
www.duayen.com.tr
Technical Data Sheet(TDS)
DUAYEN MS-954
2 Component Spray System DUAYEN YAPI KİMYA VE
MAKİNE SAN VE TİC A.Ş.
PHYSICAL PROPERTIES
*Color Grey, Beige, Red, Blue
**Solid %100
*Density 1,10 ± 0,06
*Hardness (Shore A) 80 DIN 53505
*Breakout Force (Tensile) 17,3 DIN 53504
*Tear Strength (Tear Strength) 9,3 MPa DIN 53 504
*Tear Strength (N/mm) 74 TS 4698 ISO34-1
% 400 DIN 53504
(Elongation)
*Adhesion to metal ≥ 2,3 MPa DIN EN 24624
Adhesion to concrete (without
primer) ≥ 0,9MPa DIN EN 24624
*Curing time 10 sn
*Hardening time ( T=+20) 21 sn
*Complete mechanical reaction
After 1 day
**Wear resistance(Taber, H22) 333,3 mg EN ISO 5470-1
**Shock resistance Class III EN ISO 6272-1
**CO2 permeability SD =73,48 m EN ISO 1062-2
*O2 permeability 3,94 m, Class I EN ISO 7783-2
**Short exposure highest
No change
Temperature resistance (200°C
1mint.)
**Electric resistance 200 G (Giga Ohms) IEC 60093
PTW UNIDOS E
**Radioactive Rays & Doesn’t hold and
T10008#81049+T32005#61
Doesn’t spread
Keeping Radiation within afterwards
(30cc)
PTW UNIDOS E
**Gamma radiation quality
99,3 T10008#81049+T32005#61
Cs-137 (662 Kev)
(30cc)
PTW UNIDOS E
** Permeability radioactive X-ray
92,1 T10008#81049+T32005#61
100 kV
(30cc)
PTW UNIDOS E
** Permeability radioactive X-ray
93 T10008#81049+T32005#61
150 kV
(30cc)
Doesn’t
delaminate
And additional layer
application can be
**Splice and Repair Lamination
done easily even after
Feature
long period or during
reconstruction
**UV resistance Resistant
**Usable for drinking water reservoirs DSİ D01 14-0142
**Reaction to Fire Suitable TS EN 501-1 D S3 d0
**Direct exposure to flame Suitable TS EN ISO 11925-2
**Abrasion Resistance Suitable/ 333,3 TS8103 EN ISO 5470-1
** Capillary Water Absorption and
Permeability Suitable / 0,1 TS EN 1062-3
**Contact with Drinking Water
Suitable BS 6920-1,2.6
Analysis
Contact with Drinking Water Analysis Mercury TSE 173443
Contact with Drinking Water Analysis Blurry(NTU) SM-2130 B Nephelometric
Smell, Taste,
Contact with Drinking Water Analysis Residue Sensitive
No damaged
**Flexibility in Cold Weather (20°C) witnessed TS EN 495-5
**Static Stapling
4384 TS EN ISO 12236
(2mm Thickness)
**Peeling off (On Concrete Surface)
1480 ASTM 4632
(N/m)
**Peel Off test (Geotextile) 6760 ASTM 4632
**Hydrostatic Pressure Water Leakage
TSE 1928
( 4 bar 24 Hours) Not observed
**28 days in liquid solution test
Elongation
**Change of elongation and tensile Change -5,9
TS EN ISO 527
strength after 28 days in lime solution Tensile Change +11
Elongation
**Change of Elongation and Tensile Change +0,6
TS EN ISO 527
strength after 28 days in Sodium
chloride solution Tensile Change -5,1
APPLICATION
Application material should be clean and dry from dust, moisture, grease and other contaminants. Suitable primers can be
used depending on the desired level of adherence, long-term adhesion stability and adhesion to metal surfaces. Plastic
materials surface should be cleaned, molds that can be found on the surface needs to be removed. Surface abrading and
sandblasting can provide better adhesion.
3
Technical Data Sheet (TDS)
DUAYEN MS-954
2 Component Spray System DUAYEN YAPI KİMYA VE
MAKİNE SAN VE TİC A.Ş.
• A new concrete should wait for at least 28 days before Duayen Spray application.
• The humidity on the concrete should be controlled. Application can be done with maximum 4%.
• If the concrete is new and the weather conditions are appropriate, Duayen Spray can be applied directly without the
use of primer.
• The temperature of the application surface should be 3 °C above the dew point of the air temperature. It is important
for safe application.
• It is recommended to apply epoxy primer if the temperature is below +8°C.
• Application cannot be done is the surface is ice bound.
• At the start of the application, the product can be very soft or too hard depending on the surface temperature. The
product starts gaining strength in 1-2 hours after application and reaches 95% of its strength after 1 day. It reaches full
strength in 1 week.
• If the concrete needs moisture barrier membrane, then it should definitely be applied before Duayen Spray
application.
• Sand-blasting is definitely required for steel surfaces. ISO 8501-1, degree of smoothness R≤130-170µm.
• Sand-blasting is definitely required for tile surfaces. A thin layer of Duayen Epoxy primer should be applied after sand-
blasting followed by application of Duayen Spray.
b) Hydro insulation
Duayen MS-954 is applicable.
It can be applied on materials like asphalt, concrete etc.
Can be used in new construction or during reconstruction; on top of old industrial floorings, roofs, walls, pools, garages. It
can be a little rough when applied as a top coat. Pouring quartz onto the surface can make it slip-resistant (slip-resistivity
can be increased). The desired top coat color can be achieved by applying Duayen A-324 top coat paint.
NEW BUILDINGS
a) Surface Preparation
- Sweeping
- Fill the cleaned grout joints with polyurethane based sealant
- Apply 2 component epoxy primer (Liquid, resin, 1 mm)
- Pour quartz by sprinkling on the freshly applied primer
- Sweeping the remaining quartz sand when its dried
- Sandblast and again sweep the surface
b) Final Stage
Application of Duayen MS954.
b) Final Stage;
Application of Duayen MS954. During roof reconstruction, depending on the condition of the roof, Duayen Spray
can be applied directly. It can also be applied directly on old asphalt. Cleaning is not required for old asphalt.
5
Nato Yolu,18 Mart Cad. No:21/ 1
Y. Dudullu – Ümraniye/ İSTANBUL
Tel: 0090 216 365 87 79 – 80
Fax: 0090 216 365 87 78
www.duayen.com.tr
Technical Data Sheet (TDS)
DUAYEN MS-954
2 Component Spray System DUAYEN YAPI KİMYA VE
MAKİNE SAN VE TİC A.Ş.
PACKAGING & STORAGE
All components when stored in a dry environment and untouched original packaging can be stored for 6 months.
Safe storage temperature range 16°C - 30°C: packages should be kept away from sunny and frosty conditions. In any case
(used or unused), the drum should be always closed.
Chemical reactions occur within minutes under normal operating conditions; when using high pressure system machine, the
blowing air maybe contaminated with micro structures that can result in some allergic symptoms.
Avoid eye and skin contact with uncured materials due to irritation effects; in case of any contact, the body should be
washed immediately with soap and water. Consult medical help is necessary.
Avoid food contamination with uncured materials. It is highly dangerous to approach application area with fire. Product
should be kept out of reach of children.
RISKS
Due to the specific application, job security responsibility and the responsibility of system component storage are obligated
by the practitioner.
6
Nato Yolu,18 Mart Cad. No:21/ 1
Y. Dudullu – Ümraniye/ İSTANBUL
Tel: 0090 216 365 87 79 – 80
Fax: 0090 216 365 87 78
Technical Data Sheet (TDS)
DUAYEN MS-954
2 Component Spray System DUAYEN YAPI KİMYA VE
MAKİNE SAN VE TİC A.Ş.
1922
15
1922-CPR-0254
EN 1504-2
Surface Protection Product
Coating
Abrasion Resistance (Taber): 333.3mg
Impact Resistance: Class II
CO2 Permeability: SD =73.48 m
Water Vapor Permeability: Class I
2 0.5
Capillary Absorption & Water Permeability: 0.005 kg/m xh
2
Pull-Off Test according to Adhesion Strength: 1) ≥0,8 N/mm
Reaction to Fire: Cfl
EK-2
7
Nato Yolu,18 Mart Cad. No:21/ 1
Y. Dudullu – Ümraniye/ İSTANBUL
Tel: 0090 216 365 87 79 – 80
Fax: 0090 216 365 87 78
www.duayen.com.tr
Technical Data Sheet(TDS)
DUAYEN MS-954
2 Component Spray System DUAYEN YAPI KİMYA VE
MAKİNE SAN VE TİC A.Ş.
8
Nato Yolu,18 Mart Cad. No:21/ 1
Y. Dudullu – Ümraniye/ İSTANBUL
Tel: 0090 216 365 87 79 – 80
Fax: 0090 216 365 87 78
www.duayen.com.tr