Professional Documents
Culture Documents
Page 1 of 7
Cerrar SIS
Pantalla anterior
Operación de Sistemas
R1600H Load Haul Dump Machine Electrical System
Número de medio -UENR1458-00 Fecha de publicación -01/04/2014 Fecha de actualización -22/04/2014
i05208343
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 29/06/2021
R1600H Load Haul Dump 9SD00001-UP (MACHINE) POWERED BY C11 Engine(... Page 2 of 7
Illustration 1 g03397394
The components of the window wiper and washer circuit are the: wiper washer switch, joystick wiper switch,
wiper control module, front, rear, and side washer motors, front window wiper motor, door window wiper
motor and rear window wiper motor.
Illustration 2 g03397398
Illustration 3 g03398127
Joystick control
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 29/06/2021
R1600H Load Haul Dump 9SD00001-UP (MACHINE) POWERED BY C11 Engine(... Page 3 of 7
Illustration 4 g03397399
Illustration 5 g03398160
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 29/06/2021
R1600H Load Haul Dump 9SD00001-UP (MACHINE) POWERED BY C11 Engine(... Page 4 of 7
Illustration 6 g03398152
Illustration 7 g03398161
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 29/06/2021
R1600H Load Haul Dump 9SD00001-UP (MACHINE) POWERED BY C11 Engine(... Page 5 of 7
Illustration 8 g03398162
Switch positions
Illustration 9 g03528881
The relays are located in the circuit breaker panel. The circuit breaker panel is located under the right side
armrest behind cover (A) .
Wiper control module is located under the right side armrest behind cover (B).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 29/06/2021
R1600H Load Haul Dump 9SD00001-UP (MACHINE) POWERED BY C11 Engine(... Page 6 of 7
Illustration 10 g03528877
Illustration 11 g03528882
With the key start switch in the ON position, 24 V power is supplied via circuit breaker CB11 (12) to front
window wiper motor (6), door window wiper motor (5) and rear window wiper motor (7) .
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 29/06/2021
R1600H Load Haul Dump 9SD00001-UP (MACHINE) POWERED BY C11 Engine(... Page 7 of 7
Circuit breaker CB10 (11) will supply 24 V power to the relay coils in wiper control module (13). With any
loss of 24 V power to the relay coils, the wipers and washers will not work.
When wiper washer switch (1) is turned clockwise to LOW speed (8), 24 V power is supplied via circuit
breaker CB11 (12) to front window wiper motor (6), door window wiper motor (5) and rear window wiper
motor (7) .
When wiper washer switch (1) is turned clockwise to HIGH speed (9), 24 V power is supplied via circuit
breaker CB9 (10) to front window wiper motor (6), door window wiper motor (5) and rear window wiper
motor (7) .
The right side of joystick wiper switch (2) is pressed to turn on the front, side, and rear window wipers and
washers.
Note: The front, door, and rear window wipers will operate at the low speed.
When wiper washer switch (2) is pushed in, 24 V power is supplied via circuit breaker CB10 (11) to front
washer motor (6), door washer motor (5) and rear washer motor (7) .
ReferenceFor more information on the wipers and washers, refer to Operation and Maintenance Manual,
"Operator Controls".
Copyright 1993 - 2021 Caterpillar Inc. Tue Jun 29 21:55:09 EST 2021
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 29/06/2021