Professional Documents
Culture Documents
SESSION PLAN
Consultation with
Trainer
LO 2: Use hand tools
Basic hand tools that include skills in Self-Paced Modular Read information L.O 2: Answer Post Test 1.2 Compare answer CBLM 1 LO 2 4hrs
performing tasks. Discussion USE HAND TOOLS with Answer key
Consultation with
Trainer
LO 3: Maintain hand tools
Recommended practices to identify Self-Paced Modular Read information L.O 3: Answer Post Test 1.3 Compare answer CBLM 1 LO 3 4hrs
defective and non- defective hand Discussion MAINTAIN HAND TOOLS with Answer key
tools.
Consultation with
Trainer
Unit of Competency : PREPARE WELD MATERIALS
Module Title : PREPARING WELD MATERIALS
Learning Outcomes:
1. Set up cutting equipment
2. Cut and prepare edge of materials
3. Clean surfaces and edges
4. Prepare welding consumables
Downloaded by Gillian Marbebe (yanyan030991@gmail.com)
lOMoARcPSD|13980195
C. ASSESSMENT PLAN
• Written Test: Self Check at the end of each activity will be done in order to check the required knowledge.
• Performance Test: Institutional Assessment with Oral Questioning in performing the task
• Oral questioning: The candidate for assessment will be asked 2-3 questions for further verification of the competency level.
D. TEACHER’S SELF-REFLECTION OF THE SESSION:
At the end of the session, evaluation will be done in order to determine if there is a need to improve or enhance the training delivery as well as trainer’s
capability. Also recommendation will be given to each trainees with regards to their performance as and result of the Institu tional assessment
Prepared by:
JEMLIE E. DIANA
Trainer