Professional Documents
Culture Documents
Perfil HEM140
500 mm
150 mm
60 mm
300 mm
300 mm
Tutorial: Assignments
Nuno Mendes
University of Minho
Faculty of Civil Engineering
Portugal
nunomendes@civil.uminho.pt
General properties
Geometry Material properties:
Units: meters - Masonry
Filling material Young’s modulus: 3.0 GPa
0.50 Poisson’s ratio: 0.2
1.25 1.25 Density: 2.0 ton/m3
0.50 - Filling material
2.00 Density: 1.3 ton/m3
4.00
1.50
Thickness: 1.0 m
0.35
0.48
2.85 1.00 Rigid foundation
Masonry
15.00 Dead weight:
- Masonry
- Filling material
10.00
Type of element:
- Regular Plane stress
- Linear interpolation
5.00 10.00
1.65 2.00 1.75
Model 1
Geometry Loads:
Units: meters
Filling material - Self-weight of the masonry:
0.50 Dead weight load
1.25 1.25
0.35
2.85
Masonry
15.00
10.00
5.00 10.00
1.65 2.00 1.75
Model 2
Geometry Loads:
Units: meters
Filling material - Self-weight of the masonry:
0.50 Dead weight load
1.25 1.25
2.85
Steel tie Steel tie (truss element):
- Geometry:
Diameter: 20 mm
Anchor bars: 1.00x0.05x0.05 m3
5.00 10.00
1.65 2.00 1.75
Model 3
Geometry Loads:
Units: meters
Filling material - Self-weight of the masonry:
0.50 Dead weight load
1.25 1.25
0.35
5.00
2.85 Buttress (masonry):
5.00 10.00
1.65 2.00 1.75 1.50
Model 4
Geometry Loads:
Units: meters
Filling material - Self-weight of the masonry:
0.50 Dead weight load
Flying buttress 1.25 1.25
5.00 10.00
1.50 1.65 2.00 1.751.50
Model 5
Geometry Loads:
Units: meters
Filling material - Self-weight of the masonry:
0.50 Dead weight load
1.25 1.25
Masonry
15.00 Buttress (masonry):
5.00 10.00
1.65 2.00 1.75 1.50
Settlement