Professional Documents
Culture Documents
04
Purchasing Guidelines Handbook Refer to pages 3 - 5 of API Spec 5L
API® Monogram® Equipment Purchase API Spec 5L online at www.global.ihs.com
API Specification
5L
43rd Edition, March 2004
Specification for Line Pipe
Information to be Supplied by the
Purchaser
PSL (Product Specification Level) Par. 1.2 and Table 1 Reduced Negative Tolerance Tables 9 and 10
for Wall Thickness
Quantity
Power-Tight Makeup Par. 7.9.2
Grade (and class, if applicable) Tables 2 and 3
Specific Edition of Spec 5L Par. 7.9.2
Type of Pipe Par. 5.1.3 for Pipe and Couplings
Size or Outside Diameter Par. 7.1 Alternative Bevel or End Par. 7.9.3
Preparation, Plain-End Pipe
Wall Thickness Par. 7.1
Alternative Minimum Hydrostatic Par. 9.4.3
Nominal Length Par. 7.5 and Table 11 Test Pressure
Copyright 2004 - American Petroleum Institute. All rights reserved. | 23130 5L-1
American Petroleum Institute Handbook Revision 09.18.04
Purchasing Guidelines Handbook Refer to pages 3 - 5 of API Spec 5L
API® Monogram® Equipment Purchase API Spec 5L online at www.global.ihs.com
API Specification 5L : 43rd Edition, March 2004 Information to be Supplied by the Purchaser
Specification for Line Pipe
Through-the-Flowline (TFL) Pipe SR7 Charpy Specimen Size for Par. SR5.3
Optional Fracture Toughness
Length Tolerance and Jointer Par. SR7.2
Allowance for TFL Pipe Type of Notch for Drop Weight SR6.3
Tear Test Specimens
Marking Requirements
Internal Diameter Tolerance Par. 7.2
Alternative Length Units Par. 10.5 and I.5
Intermediate Diameter Par. 7.1
Additional Markings for Par. 10.1.3 and I.1.3
Compatible Standards Intermediate Wall Thickness Par. 7.1
Marking Location and Par. 10.2c and I.2.3 Skelp End Welds at Jointer Welds Par. 7.7
Sequence for Welded Pipe,
Size 16 and Larger Hydrostatic Test for Threaded Par. 9.4.1
and Coupled Pipe
Die Stamping of Pipe or Plate Par. 10.7 and I.7
Higher Hydrostatic Test Pressure Par. 9.4.3
Method of Welding Jointers Par. A.1
End Load Compensation for Par. 9.4.3 and
Purchaser Inspection Par. 9.7.1 and Hydrotest Producing Stress Appendix K
Appendix H > 90% SMYS
API Monogram Marking (see Note 2) Par. I.1 Diameter Tolerance for Table 7
Nonstandard Hydrotest
4.3
The following stipulations are subject to agreement between the Alternative Nondestructive Test Par. 9.7.2.2
purchaser and the manufacturer: Method for Seams at Ends of
Electric Welded Pipe
Information Reference
Alternative Nondestructive Par. 9.7.2.3
Alternative Heat Treatment Par. 5.1.3.3 Test Method for Seams at Ends
for Electric Weld Seams of Laser Welded Pipe
Quenching and Tempering Par. 5.4 Alternative Reinspection Method Par. 9.7.4.3
of Grade B Pipe for Gas-Metal-Arc Welds
Skelp End Welds at Pipe Ends Par. 5.5 Alternative Reference Standard Par. SR4.3.2
for Nondestructive Inspection
Chemical Composition Par. 6.1.1 of Seamless
Intermediate Grade Par. 6.1.1 and 6.2.1 Technique for Nondestructive Par. SR17.2
Inspection of Electric Welds and
Carbon Equivalent Limit (PSL 2) Laser Welds
5L-2 Copyright 2004 - American Petroleum Institute. All rights reserved. | 23130
American Petroleum Institute Handbook Revision 09.18.04
Purchasing Guidelines Handbook Refer to pages 3 - 5 of API Spec 5L
API® Monogram® Equipment Purchase API Spec 5L online at www.global.ihs.com
API Specification 5L : 43rd Edition, March 2004 Information to be Supplied by the Purchaser
Specification for Line Pipe
Information Reference
Marking Requirements
Notes:
1. Nothing in this specification should be interpreted as
indicating a preference by the committee for any material or
process or as indicating equality between the various materials
or processes. In the selection of materials and processes, the
purchaser has to be guided by experience and by the service for
which the pipe is intended.
Copyright 2004 - American Petroleum Institute. All rights reserved. | 23130 5L-3