Professional Documents
Culture Documents
Contents
1. Preservation .................................................................................................................................................................... 2
2. Packing ............................................................................................................................................................................ 2
2.1. Classification of Packing Forms ............................................................................................................................... 2
2.2. General ................................................................................................................................................................... 3
2.3. General requirements for Moisture Proof Box, Water Proof Box and Open Crate ................................................ 3
2.4. General requirements for Skid, Bundle and Pallet ................................................................................................. 4
2.5. General requirements for Steel Frame ................................................................................................................ 4
2.6. Packing for Steel Structure ..................................................................................................................................... 5
2.7. Packing steps for dry container (steel framed skid inside) ..................................................................................... 5
2.8. Packing steps for break bulk (oversized steel framed skid) .................................................................................... 7
1
August 13, 2021
1. Preservation
All surfaces of products shall be cleaned free of oil, rust and contaminant before packing.
2. Packing
2
A
August 13, 2021
2
2.2. Generral
2.2.3 The tags be attached to each prodduct to make e field identiffication easy,, and the tag
gs shall be ad
dhered
firmly to prevent
p being
g detached easily
e during handling and transportattion.
2.2.12
2 In case off transportatiion with dry container,
c the
e timber dire
ection of rubb box/pallet/skid shall
bing strip of b
be applied in the same direction as a the longituudinal directio
on of the con
ntainer.
2.2.13
3 Products (Paint/Thinn ner, Battery, etc.) which are classifie erous goods should be packed
ed as dange p
g to the relate
according ed internation
nal regulation
n such as IMD
DG Code(Intternational Maritime
M Dang
gerous
Goods Co
ode), TI (Tecchnical Instru
uctions for the
e safe transp
port of dange
erous goods by air) and so
s on.
2.3. Generral requireme
ents for Moissture Proof Box,
B Water Proof Box and
d Open Crate
e
3
August 13, 2021
2.3.3 The empty space caused by unevenness of products in the boxes should be filled up with wood pieces
in order to prevent the breakage caused by stacking during ocean transportation.
2.4.1 For product packed in wooden skid or bundle, the timber which can have at least 120 mm of the
minimum distance between bottom of product and ground shall be used for packing. However, for
products are handled only by crane, the timber which can have at least 90 mm can be used.
2.4.2 The distance between wooden skids shall maintain the regular interval to make loading easy while
shipment.
2.4.3 In case of wooden skids the timber for skid shall be fixed tightly to the products with bolts, wire ropes,
etc. to prevent escaping of timber during transportation and handling.
2.4.4 The interval between bolts for fixing wooden skid and products should be maintained at least 30 cm
or more.
2.4.5 The minimum size of the bolts is 12 mm, but 16 mm bolts should be applied if the weight of packing is
more than 10 ton or height of packing is more than 1m.
2.4.6 The timber should be installed within at least 500mm from the both edges of products.
2.4.7 When products are packed in bundle by multi-stacking, struts(role of skid) between products shall be
aligned vertically and be tightened with bolts entirely to prevent separation. For products that can be
moved during the shipping or handling, each stage shall be fixed with Cord Strap or Steel band, and
struts should be applied between each stages.
When assembling, coated (galvanized or equivalent) bolts, nuts and washer shall be used and
surface of the bolts shall be protected by using the rubber hose, etc..
2.4.8 The bolts used in upper part of wooden skid/bundle/pallet shall be fastened after grooving to avoid
interference during transportation or shipment. However, in case of local transportation or not stacking
during storage, wood grooving can be excluded.
2.4.9 Check if there is no loosen bolts, cord strap, steel band due to the wood drying after packing completion
and before shipment. All bolts and nuts should be fastened tightly.
2.4.10 All products shall be packed properly with timber, plywood and rubber pad, etc. to prevent damage
caused by direct contact with handling equipment during handling.
(Especially, handling points of products as Vessel, Tank, Big bore pipe, etc. packed in skid shall be
protected with timber, rubber pad, plastic, etc.)
2.4.11 Products that are covered by tents shall be tied firmly by P.E ropes, cord strap, etc. to avoid being torn
during transportation. And the rubber pad, Plastic Form, additional Tent, etc. shall be placed between
tent and sharp part of product in order to protect tent from damage.
2.4.12 Sling point of Products weighed more than 3 Ton packed in pallet shall be protected with the wire cover
lower. The specification for wire cover lower refer to the specification of the wooden box.
4
A
August 13, 2021
2
In case of steel frameed skid, unevven parts sho ould be coveered or levele
ed with nylon
n ropes or plywood
before covering it with
h tents in orde
er to prevent product’s da
amages caussed by rain waater pools on
n tent’s
top during transporta ation and sto orage at site
es. If the stteel framed skid to be put inside the dry
containerr during transsportation or the packed items have wetherproof
w a
ability, no req
quest for cov
vering.
2.6. Packin
ng for Steel Structure
S
2.6.3 In case off pipe bracess, gusset plattes that are delivered
d as assembled form
f shall be disassemble
ed and
packed se eparately in boxes for effficiency of packing. In thhis case, marrking of memmber’s numbeer and
ember should be written thoroughly.
lists of me
2.7. Packin
ng steps for dry
d container (steel frame
ed skid insid
ded)
5
August 13, 2021
2
6
A
August 13, 2021
2
Thhis method iss suitable to the oversizeed items could not be put inside the dry container normally. Th
he size
off the skid dep
pends on the e size of the items
i to be packed.
p
7
August 13, 2021
2
8