Professional Documents
Culture Documents
SMU OneKeyUpdateTool Upgrade Guide
SMU OneKeyUpdateTool Upgrade Guide
Upgrade Guide
Issue 01
Date 2021-09-10
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties,
guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Contents
Set the IP address, sub-net mask, and gateway of the SMU on the LCD screen base
on the IP address allocated by customers. The LCD default password is 000001.
Set the IP address, subnet mask and default gateway of your computer, it should be
in the same subnet of SMU02B, but with different IP address.
Note:
If the tool has been opened or the TFTP service of the PC is working, it will be failed
as shown in the below picture.
Solution:
1. Check whether the upgrade tool has been open, if it does, close all the opened
windows and open the tool again.
2. If the tool hasn’t been opened, check whether the TFTP service has been
opened. If it does, close all the service and open the upgrade tool again.