Professional Documents
Culture Documents
Material: Steel
Property Class: Hardness: 200 HV to 300 HV (chapter 3)
Surface Protection: Electroplating zinc 5 µm + white passivation Cr III
1 Generality
• The values indicated in this instruction are based in the Standard ISO 7089:2000;
• For supply, the supplier must consider the last edition of the standard;
• Additional requirements can be indicated in the purchase order.
2 Correspondence Standards
• DIN 125A
• GB/T 97.1 (China)
3 Mechanical Properties
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third
parties without express authorization is strictly forbidden. Copyright 2018 by GE.
Name : HS-FWR01-000000STAEC Rev : C Release : 2022/08/16 04:55 AM
Hydro Technical Standard HS-FWR01-000000STAEC
Engineering Procurement Specification Revision: Date: Page:
Fastener: Washer C 04/08/2022 2/4
d (mm) 16 20 24 30 36 42 48 56 64
d1 17 21 25 31 37 45 52 62 70
d2 30 37 44 56 66 78 92 105 115
h 3 3 4 4 5 8 8 10 10
HS-FWR01-xxxxxxSTA (replace the "xxxxxx" by the code below)
160000 200000 240000 300000 (360000) (420000) (480000) (560000) (640000)
NON-PREFERRED
d (mm) 14 27 33 39 45
d1 15 28 34 42 48
d2 28 50 60 72 85
h 2.5 4 5 6 8
HS-FWR01-xxxxxxA20 (replace the "xxxxxx" by
the code below)
(140000) (270000) (330000) (390000) (450000)
Remarks:
1) Values in brackets are considered as NON-PREFERRED dimension. Avoid these values.
2) Explanation about the codification, please see the chapter 7.
3) For other dimension, refer latest version of ISO 7089.
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third
parties without express authorization is strictly forbidden. Copyright 2018 by GE.
Name : HS-FWR01-000000STAEC Rev : C Release : 2022/08/16 04:55 AM
Hydro Technical Standard HS-FWR01-000000STAEC
Engineering Procurement Specification Revision: Date: Page:
Fastener: Washer C 04/08/2022 3/4
5 Surface Protection
Electroplating zinc 5 µm + white passivation Cr III according to any one of the following:
ISO 19598 – Grade - Fe//Zn5//An//T0 or Fe//Zn5//Cn//T0
ASTM F1941 – Grade - Fe/Zn/8AN or Fe/Zn/8BN
For Details refer above mentioned specifications and GE Specification B50HES3510
For coating process, the agent Chromium 6 is strictly forbidden to be used in Europe.
6 Delivery Conditions
6.1 Identification
The component or its package must be identified with the following information:
• Quantity of parts.
6.2 Certificate
• The components must be supplied with the test certification according to EN10204 - 2.2.
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third
parties without express authorization is strictly forbidden. Copyright 2018 by GE.
Name : HS-FWR01-000000STAEC Rev : C Release : 2022/08/16 04:55 AM
Hydro Technical Standard HS-FWR01-000000STAEC
Engineering Procurement Specification Revision: Date: Page:
Fastener: Washer C 04/08/2022 4/4
Example: A Plain Washer without chamfer with nominal size 3mm, made of Steel and electroplated Zinc
coating is designated as follow:
Codification: H S – F W R 0 1 – 0 3 0 0 0 0 S T A
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third
parties without express authorization is strictly forbidden. Copyright 2018 by GE.