Professional Documents
Culture Documents
11.11.2021 11.11.2021
4% of Doroport TB25 shall be used based on 7 days laboratory results & Ev2 value of stabilised layer shall be minimum 120MN/m2.
28days laboratory results shall be submitted.
Holcim (România) SA Tel. +40 259 34 97 65/66
Ciment Aleșd Fax +40 259 34 97 72
Str. Viitorului, nr. 2 Nr. RC J40/399/2002
417022 Chiștag, C.U.I. 12253732
Com. Aștileu C.I.F. RO12253732
Bihor Subscribed and paid capital
România 205.268.057 lei
Version 3
6. Declared performance
Essential features Declared performance Harmonized technical specification
Components and composition [weight %]:
- Clinker (K) ≥ 20
- Main components according to EN197-1 ≥ 10
- Minor auxiliary components ≤ 10
Initial setting time (min.) ≥ 90
Stability (expansion) (mm.) ≤ 10
Downward strength: after 7 days (MPa) ≥ 10
Downward strength: after 28 days (MPa) ≥ 22.5
SR EN 13282-1:2013
≤ 42.5
Sulfate content (as SO3) (%) ≤4
Fineness (expressed as residue trough a ≤ 15
90 micron mesh sieve (%))
Durability Durability refers to completed works performed
using hydraulic binders and complying with the
rules valid on site.
Release of dangerous substances [%]1 NPD
The performance of the product identified above is in compliance with the stated performance set.
This declaration of performance is issued in compliance with Regulation (EU) no. 305/2011, respectively with Regulation (EU)
no. 574/2014, on the sole responsibility of the manufacturer identified above.
1 For additional information, please see the Safety Data Sheet (publicly available at www.holcim.ro)
CERTIFICATE OF CONFORMITY
for Plant Production Control
no.: 1840-CPR-97/555/EC/0520-14
In compliance with Regulation (EU) no. 305/2011 of the European Parliament and of the Council from 9 March 2011
(Regulation on Construction Products – CPR) this certificate shall be applicable to the following construction
product(s):
Applicability: For the treatment of materials used for base layers, sub-structures, coatings and road beds, railway
beds, airports and other types of infrastructure.
HOLCIM (ROMANIA) SA
București, Sector 1, Calea Floreasca, nr. 169 A, Corp B, Etaj 7
Made in:
This is to certify:
• that all the provisions regarding the performance evaluation and check-up, provided by the standard/standards
bellow, specified in Appendix ZA, have been met:
EN 13282-1:2013 - SISTEM 2+
• the AEROQ assessment of plant production control, carried out by the manufacturer, in compliance with all
applicable requirements.
The certificate was originally issued on 10/29/2014 and it shall remain valid unless the following are significantly
changed: the harmonized standard, the product used for construction, the performance assessment and check-up
methods and the manufacturing conditions, except in such cases when it is suspended or withdrawn by the notified body
responsible for the certification of the plant production control – AEROQ.
Certificate validity is conditioned by the performance of the annual surveillance and the continuous evaluation of
the plant production control, confirmed by the resulting reports.
The maintenance of certificate validity can be confirmed at the following address www.aeroq.ro.
DOROPORT® TB
Special Binders for road layers stabilization
Product sheet
45%
less CO2
emissions
30%
recycled
materials
DOROPORT® TB
DOROPORT® TB
Special Binders for road layers stabilization
The DOROPORT® TB binder range includes several products, depending on their strength category
(SR EN 13282-1:2013):
• DOROPORT® TB 15 (HRB E2 type)
• DOROPORT® TB 25 (HRB E3 type)
• DOROPORT® TB 35 (HRB E4 type)
Reference level – 0% reduction of CO2 emissions Reference level – 0% reduction of CO2 emissions
CLIMATE CATEGORY Indicates the level of CO2 emission reduction compared to the European average (CEM I EU 28, according to GNR PROJECT Reporting CO2, 2018), and
varies depending on the particularities of the production process of each cement plant.
The product performance, during application, is not influenced by the climatic category.
A++ SOLUTIONS Contact your Holcim representative to find out how to reduce your project’s CO2 emissions by up to 100%.
Applicability
• Building sub-structures and base structures for non-rigid and rigid road systems
• Applying bituminous coatings using the cold recycling technology, I-IV technical category
• Expanding existing sub-structures
• Building platforms and parking lots
• Reinforcing standing lanes, merge lanes and roadsides
• Applying protective coatings for local roads or low-traffic streets
• Applying bituminous coatings using the cold recycling technology
DOROPORT® TB
DOROPORT® TB
Properties Instructions for use
DOROPORT® TB is a fine gray powdery material. DOROPORT® TB shall be applied:
Combined with cohesive and non-cohesive soils, 1. by spreading it directly over the material with which the
DOROPORT® TB forms a mixture that can be easily mixture is made
applied and compacted, increasing the load-bearing 2. by mixing it "in-situ" with a specialized equipment
capacity of the road layer where it is applied. (mixing mills, recyclers, etc.) or with special fixed or
The strength class of DOROPORT® TB is determined mobile installations, followed by:
based on the SR EN 196-1 standard. 3. on-site transportation using a dumper
The setting time is determined based on the SR EN 196-3 4. commissioning (application and compaction)
standard. 5. protection
Ti = 3 hours approximately
Tf = 5 hours approximately DOROPORT® TB is used as a weight percentage of the
material with which the mixture is made, depending on
By adding an optimal percentage of water to the mixture, the preliminary laboratory tests results. The final
the processing time on site can be up to a maximum of 8 percentage of DOROPORT® TB is determined after the
hours. DOROPORT® TB behaves extremely well when test sector is performed and the interpretation of the
used in environments with sulfate aggression, which obtained results.
enables it to be used in combination with sulfate-
containing soils, thus helping their proper consolidation.
Strength
Type of hydraulic binder for roads 7-day downward strength (MPa) 28-day downward strength (MPa)
class
Aleșd Pitești
Residue fineness in 90 µm Initial setting Stability SO3 content
weight % time (min.) (mm) (%) Produced in: ✓ ✓
≤ 15 ≥ 90 ≤ 10 ≤4 Delivered from: ✓ ✓
Packing Note
• DOROPORT® TB is delivered in bulk. • When in contact with water, DOROPORT® TB has an alkaline reaction. If it
accidentally comes in contact with the skin, remove the product by rinsing with
plenty of water.
Shelf life • If it accidentally come in contact with the eyes, seek medical advice
• 60 days from its delivery date, by complying with the immediately.
transport and storage conditions provided in the
declaration of conformity of the product.
DOROPORT® TB
Holcim (Romania) S.A.
Calea Floreasca nr. 169 A
Clădirea B, Etajul 7
Sector 1, RO 014459
București, România
www.holcim.ro
ş ş
ş ş
ş
•
•
•
•
•
• ş
•
•
•
•
•
•
•
•
ş
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ş
ş
ş
ş
ş
ş
ş
See appendix for details