Professional Documents
Culture Documents
Procedure: -
1. Apply the Parallel inputs, Clock and data select according to circuit.
2. Use arrow for right and left shift.
3. Check the output from Qa, Qb, Qc and Qd.
4. For right shift use arrow pin given on the top of the circuit and for
left shift use arrow pin given on the top of circuit.
5. Expected results table is given below.
0 1 Shift right
1 0 Shift left
1 1 Parallel load
Table:
Input Output when Input right shift Parallel output Input left shift Parallel output
parallel load
I0 A0 A0 A0
I1 A1 A1 A1
I2 A2 A2 A2
I3 A3 A3 A3
Results:
1. No Change:
2. Shift right
3. Shift left
4. Parallel load
---------------------------
Faculty Signature