Professional Documents
Culture Documents
Aim:- To find out the voltage across R1,R2,R3 and R4 in Open Modelica
Software
Components
✔ Resistor
✔ Voltage source
✔ Current sensor
✔ Voltage sensor
✔ Ground
1
Steps/Procedure
I. Open OM connection editor.
II. Click on Create New Modelica class.
III. Give a new Modelica class name.
IV. Click on ok.
V. Go to Modelica packages.
VI. Go to electrical.
VII. Expand analog.
VIII. Expand basic.
IX. Drag four resistor and one ground to the modelling field.
X. Choose the constant voltage from source packages.
XI. Drag the current sensor from sensor packages.
XII. Drag four (4) voltage sensor from sensor packages.
XIII. Connect the componets.
XIV. Assign the given values of each component respectively.
XV. Click on check model.
XVI. Click on simulate, save the file before simulation and after completing
the circuit so as to avoid error.
2
You can also see the modellica script in text view.
3
I 3.57143A
V1 14.2857V
V2 21.4286V
V3 28.5714V
V4 35.7143V
CONCLUSION
At the end of the experiment the voltage across R1,R2,R3 and R4 were
verified successfully using Open Modelica Software