Professional Documents
Culture Documents
, PUNE
Seminar on
SQUEEZE CASTING PROCESS
Seminar by
DIPANSHU KAWLE(308030)
Guided by
Prof. G.P.BORIKAR
2
Contents
1. Introduction
2. Squeeze casting
3. Working
4. Process parameters
5. Case study
6. Advantages & Disadvantages
7. Applications
8. Conclusion
MIT Pune
9. References
3
SQUEEZE CASTING
MIT Pune
4 Introduction
Also known as liquid-metal forging.
Near net shape process - the initial production of the item is very close to the final (net)
shape, reducing the need for surface finishing.
Squeeze casting is simple and economical, efficient in its use of raw material.
The process generates the highest mechanical properties attainable in a cast product .
MIT Pune
Squeeze casting process working
5
MIT Pune
6 Casting parameters
Casting temperatures depend on the alloy and the part geometry. The starting point is
normally 6 to 55°C above the liquidus temperature.
Lubrication For aluminum, magnesium, and copper alloys, a good grade of colloidal graphite
spray lubricant has proved satisfactory when sprayed on the warm dies prior to casting
MIT Pune
7 Case Study
Effects Of Squeeze Casting Process Parameters On Density Of Lm20 Alloy
The experiment are carried out at different
squeeze casting condition to know the effect
of process parameters such as
squeeze pressure,Pressure duration,,Time
delay & Die temperature.
MIT Pune
8 Effects of Process Parameters
MIT Pune
10 Advantages
MIT Pune
11 Disadvantages
Costs are very high due to complex tooling
MIT Pune
12 Applications of Squeeze Casting
The squeeze casting has been commercially succeeded in manufacturing parts
include an Aluminium dome , ductile Iron mortar shell, and a Steel bevel gear.
Aluminium automotive wheels and pistons, and gear blanks made of brass and
bronze.
Compared with the HPDC, the squeeze casting process with high applied pressure
is a promising solution for thick magnesium castings
Other parts that have been Squeeze cast include stainless steel blades, super
alloy discs,
MIT Pune
13
Conclusion
In conclusion, squeeze casting technology can greatly improve the
performance of aluminum alloys and other light alloys;
Najib Souissi ,Slim Souissi , Christophe Le Niniven , Mohamed Ben Amar , Chedly
Bradai and Foued Elhalouani “ Optimization of Squeeze Casting Parameters for
2017 A Wrought Al Alloy Using Taguchi Method “
Maleki, A.; Shafyei, A.; Niroumand, B. Effects of squeeze casting parameters on the
microstructure of LM13 alloy. J. Mater. Process. Technol. 2009, 209, 3790–3797.
Manjunath Patel G. C1, Robins Mathew, and Prasad Krishna, “Effects of Squeeze
Casting Process Parameters on Density” Department of Mechanical Engineering,
National Institute of Technology Karnataka , Elsevier, 2013
MIT Pune
15
THANK
YOU
MIT Pune