This document contains details about an assignment for a basic geotechnical engineering module, including two questions to answer. The first question provides standard penetration test data and asks the student to determine the corrected SPT value, relative density, angle of friction, and unconfined compressive strength. The second question provides a light weight dynamic probing test value and asks the student to determine the soil resistance.
This document contains details about an assignment for a basic geotechnical engineering module, including two questions to answer. The first question provides standard penetration test data and asks the student to determine the corrected SPT value, relative density, angle of friction, and unconfined compressive strength. The second question provides a light weight dynamic probing test value and asks the student to determine the soil resistance.
This document contains details about an assignment for a basic geotechnical engineering module, including two questions to answer. The first question provides standard penetration test data and asks the student to determine the corrected SPT value, relative density, angle of friction, and unconfined compressive strength. The second question provides a light weight dynamic probing test value and asks the student to determine the soil resistance.
SECTOR Construction and Building Services Reg. No SUB-SECTOR Construction Technology Name MODULE (Code CSTGE701 Basic Geotechnical Engineering & title) Other information Competence Apply basic geotechnical engineering Trainer NZITUNGA Emmanuel Learning Unit LU1. Perform Geotechnical Investigation Duration Learning Outcome LO1.4 Date ……../02/2023
Assignment No 1 Marks
1. The observed standard penetration test value in normally
consolidated sand was 45 at a rod depth below the anvil of 6.5m with density index of 70%. The average effective unit weight of the soil is 9.69kN/m3. The other data given are; measured energy = 450J, and vertical stress of 80kpa. Determine the: i. Corrected SPT value for standard energy N60 ii. Relative density Dr iii. Angle of friction ϕ iv. unconfined compressive strength qu
2. The observed light weight dynamic probing test value in normally
consolidated sand was 35. Find soil resistance if the driving hammer weigh is 4.65Kg.