Professional Documents
Culture Documents
com
DETAIL ENGINEERING
(DOMINICAN REPUBLIC)
03-28-23
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
1 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
Index
1 OBJECT ................................................. ................................................................ ........................................... 3
2 LOCATION .................................................. ................................................................ ............................ 3
3 MINIMUM DESIGN CONDITIONS .................................................. ........................................... 3
4 UNITS AND LANGUAGE............................................... ................................................................ ............... 3
5 CODES AND STANDARDS ................................................ ................................................................ .................... 4
5.1 IEC standard ................................................ ................................................................ ........................... 4
5.2 NEC Standards.................................................. ................................................................ .......................... 4
6 SCOPE OF SUPPLY ............................................... ................................................................ ....... 5
6.1 Generalities .................................................. ................................................................ ............................ 5
6.2 Scope of supply ............................................... ................................................................ ............... 5
6.3 Exceptions to the Specification................................................... ................................................................ ... 6
2 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
1. OBJECT
The purpose of this document is to describe Dominion's minimum requirements for the provision of
Medium Voltage (MV) cabling.
These actions are part of the Photovoltaic Project called LUCILA located in the municipality of
Nizao, Peravia province (Dominican Republic).
2 LOCATION
The 10.3 MWac LUCILA Photovoltaic Solar Plant will be located in the municipality of Nizao,
Peravia province (Dominican Republic).
Most of the surface of the project will be occupied by the photovoltaic generator, providing access
roads to the investment and transformation centers distributed throughout the plant. There will be a
fence around the perimeter.
The activity carried out by the plant will be the generation of electrical energy using solar energy
incident on a surface of photovoltaic panels as a primary energy source, arranged in such a way as to
maximize the capture of solar energy and optimize the energy generated in the entirety of the plant.
plant.
3 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
The adoption of new standards, publications and recommendations of any issue subsequent to the
order date and additions or interpretations of the standards listed in the previous section, will be
subject to prior approval. For this purpose, the Supplier will notify the issuance of new editions of the
publications, indicating, when applicable, the repercussion of the same in the scope of supply. For all
aspects of construction, tests and trials not defined in the standards or in this Specification, the
Supplier will propose the application standards for approval.
5.1 IEC STANDARDS
All the component elements of the equipment included in this Technical Specification must be
designed, manufactured and tested in accordance with the applicable requirements of the most
recent edition existing on the order date of all national and international regulations.
The following standards are considered relevant for the purpose of this document:
4 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
• ICEA T-31-310 - Test Method for Conducting Longitudinal Water Penetration Resistance Tests on
Blocked Conductors
• ICEA T-32-645 - Guide for Establishing Compatibility of Sealed Conductor Filler Compound with
Conducting Stress Control Material
• ICEA T-34-664 - Test Method For Conducting Longitudinal Water Penetration Resistance Tests On
Longitudinal Water Blocked Cables
• UL 1072 - Standard for Medium-Voltage Power Cables
• UL 2556 - Wire and Cable Test Methods
• UL 44 - Thermoset-Insulated Wires and Cables
• IEC 60332-3 - Tests on electric and optical fiber cables under fire conditions
• IEC 60684-2 - Flexible insulating sleeving - Methods of test
• IEC 60754-1 - Test on gases evolved during combustion of materials from cables -
Determination of the halogen acid gas content
• IEC 60754-2 - Test on gases evolved during combustion of materials from cables -
Determination of acidity (by pH measurement) and conductivity
• IEC 61034-2 - Measurement of smoke density of cables burning under defined conditions - Test
procedure and requirements
6 SCOPE OF SUPPLY
6.1 GENERAL
The supply will include the Medium Voltage (MV) cabling.
• Material
• Manufacturing
• Loading and transportation to the enterprise
• Inspection and tests in the supplier's laboratory
• Documentation and certificates
• Packaging
• Guarantee
The Supplier must carry the necessary documents for approval, material certificates, tests,
essays, reports, factory certificates, legalizations, etc.
The Supplier will be obliged to duly protect the material to be supplied against mistreatment,
weather conditions, humidity, salinity, condensation, etc., trying to use the necessary
auxiliary products to protect the material during the period between the date of manufacture
and delivery.
The Supplier will be in charge of the fees and services necessary for the transport to the place where
the Photovoltaic Plant is located, of all the material included in the scope of supply.
5 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
If there are still doubts, the Supplier must identify any contradiction between the attached
documentation and this specification and request clarifications.
7 MV WIRING
7.1 GENERAL
MV cabling is made up of:
6 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
• They will comply with all the specifications of the UNE-211435, IEC 60332-1, IEC 60949, IEC 60502-2, IEC
60754-2, UL 1685 standards.
The marking of all cables will be at intervals no greater than one meter and will include at least the
following information:
7 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
8 ESSAYS
All wiring must be tested in accordance with all applicable national and IEC regulations, codes and
standards, including, at least:
The manufacturer shall obtain all certificates, inspections, and approvals required to provide
authorized cabling.
The following checks shall be carried out on all cables:
• Good condition of the wiring, without cuts, splices or repairs with insulating tape or any
other inappropriate material.
• Absence of sharp edges that could damage the cable.
• Verification that the applied voltage is appropriate and that no insulation fault occurs.
• Labeling verification.
• Maker
• Cable type and section
• Cable length (2% maximum tolerance)
All ends of the cable must be protected against water and other environmental elements. Coils should be
stored on smooth surfaces and, whenever possible, without slope. If this is not possible, they will be placed
in such a way that their movement is prevented by themselves or by accident or malicious acts. Even when
they do not contain a cable, they must be immobilized by using wedges, and cannot be replaced by nails or
stakes.
The treatment of the coils during delivery must follow the recommendations illustrated in the
following table:
8 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
9 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
The design responsibility is the sole and exclusive responsibility of the supplier. However, all
documentation must be delivered to Dominion at least 15 days in advance for review. This review
will not relieve the supplier of any of its responsibilities, leaving Dominion exempt from any
liability derived from a design or manufacturing defect.
The documentation to be submitted must follow the Dominion coding procedure that will be delivered once
the contract has been awarded.
A detailed and complete TECHNICAL OFFER must be submitted in accordance with this specification, which
must also include:
The documentation to be delivered once the contract has been awarded during design and supply (this list does
not exclude other documentation requested by Dominion once the project has been awarded) will be the
following:
• Complete list of documents agreed upon in the award phase with delivery date.
• Warranty terms.
• Quality certificates (materials, tests, tests and manufacturing).
• Supply quality plan.
• Supply plans.
• List of suppliers
10 of 12
LUCILA PHOTOVOLTAIC SOLAR PARK Ref.: LUC-PV-20MT0-1400
11 CALENDAR
The supplier must deliver a detailed schedule in the offer, where the different manufacturing and
supply phases appear, as well as the assembly phases.
As a guide, it must be adapted to the project requirements established by Dominion.
11 of 12