You are on page 1of 13

F. Y. B.

Tech Academic Year 2020-21


Trimester:I Subject: Basics of Electrical and Electronics Engineering

Name: Ritesh Bhoite Division: 24 Roll No: 124050

Batch: 3

Experiment No: 8

Name of the Experiment: Design of inverting and non-inverting amplifier using OPAMP.

Performed on: 12th Jan 2021

Submitted on: 27th Jan 2021

Aim: Design of inverting and non-inverting amplifier using OPAMP.

Prerequisite:
● Understanding of ideal and practical parameters of OPAMP

Objectives:
● To get familiar with OPAMP as an amplifier

● To identify the pins of an OPAMP such as LM 741

● To measure gain of OPAMP and compare it with theoretical value ● To understand

the different configurations of OPAMP

Components and equipment required:


Function generator, CRO, regulated power supply, resistors, capacitors, OPAMP LM741
circuit board, connecting wires, etc.
Observation Table:

1. Inverting Amplifier:

Circuit

Input R1 R2 Output Gain Gain


Sr. Voltage Voltage (Practic (Theoretical)
No. al)
Vin Vo
1 0.5V 1 kohm 10 kohm 5V 10 -10
2 1V 5 kohm 15 kohm 3V 3 -3
3 0.8V 10 kohm 20 kohm 1.6V 2 -2
4 2V 1 kohm 5 kohm 10 V 5 -5
5 0.8V 1 kohm 15 kohm 12 V 15 -15
2. Non-Inverting Amplifier

Circuit

Input R1 R2 Output Gain Gain


Sr. Voltage Voltage (Practical) (Theoretical)
No.
Vin Vo
1 0.5 V 6 kohm 12 kohm 1.4 V 2.8 3
2 0.6 V 8 kohm 10 kohm 1.25 V 2.08 2.25
3 0.8 V 12 kohm 10 kohm 1.4 V 1.75 1.83
4 0.9V 6 kohm 14 kohm 2.8 V 3.1 3.3
5 1V 10 kohm 20 kohm 3V 3 3
Note: Students are instructed to do all the necessary calculations on separate sheets.

Conclusion:
Thus, we have learnt and understood the working of OP AMP as an amplifier
and also studied the working of OP AMP in different configurations,
including the study of its pins. We have also calculated the gain of OP AMP
and compared it with the theoretical gain values as mentioned above.

Post Lab Questions:


1. What is an operational amplifier?
2. Write applications of positive feedback and negative feedback in OPAMP.
3. Write gain equation for inverting and non-inverting amplifier of OPAMP?
4. What is OPAMP adder, OPAMP subtractor circuit?

Additional links for more information:


● http://dei.vlab.co.in/?sub=22&brch=60&sim=1119&cnt=2 ●
http://www.ti.com/lit/ds/symlink/lm741.pdf
1
2
3
4
5
6
7
8
9

You might also like